¿Qué absorbe a 1446 cm⁻¹ en un espectro FTIR?
Una banda cerca de 1446 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Respuesta rápida
Una banda cerca de 1446 cm⁻¹ se interpreta generalmente verificando qué grupos funcionales coocurren repetidamente allí en la literatura, luego confirmando al menos uno o dos picos adicionales en la misma muestra. Esta página clasifica esas asignaciones por evidencia acumulada en lugar de por una única regla fija de libro de texto.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Alkyl C-H | 9 | 7 | 1,0 |
| Amide | 7 | 7 | 1,0 |
| Alkene (C=C) | 4 | 4 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| Ester | 3 | 3 | 1,0 |
| Ring structure | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 2 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Nitrogen heterocycle | 2 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Bronsted acid site | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Carbonate | 1 | 0 | 1,0 |
La clasificación refleja la evidencia acumulada de la literatura, no una regla fija única. Confirme siempre según el contexto de su muestra.
Materiales posibles
Los materiales se muestran solo cuando el mismo grupo de literatura respalda esta banda y al menos un pico característico adicional.
Lógica de espectro
Esta banda adquiere significado solo cuando se lee junto con sus picos vecinos. En la práctica, los analistas primero observan las asignaciones anteriores, luego verifican si la misma muestra también muestra otros picos esperados para el mismo motivo estructural. Una banda solitaria cerca de 1446 cm⁻¹ generalmente no es suficiente por sí sola para la identificación del material.
Uso en el mundo real
Este tipo de consulta es común en la identificación de polímeros, cribado de plásticos desconocidos, resolución de problemas de control de calidad, verificación de materiales reciclados y revisión de asignación de picos respaldada por la literatura.
Errores comunes
- Tratar una banda aislada como prueba de un material sin verificar al menos uno o dos picos de apoyo.
- Ignorando superposición: múltiples grupos funcionales pueden contribuir cerca del mismo número de onda.
- Omitir la validación cuando los aditivos, las mezclas, la oxidación o la contaminación puedan distorsionar el espectro.
Consejo de verificación
Cuando persista la ambigüedad, valide la hipótesis con DSC, GC-MS o TGA, especialmente para mezclas, muestras degradadas y polímeros rellenos.
Literatura detrás de estas asignaciones
-
Alkyl C-H confianza 1,0
“Absorption determined the crystallinity factor by using the ratios of the cm-1 observed only at B spectra would peak at ~1446 areas covered under the peaks related to crystalline and in correspond to C-H deformation and aromatic ring vibrat”
Das 等 - 2017 - Extraction of xylem fibers from Musa sapientum and DOI: 10.1007/s12221-017-1187-5 -
Hydroxyl (O-H) confianza 1,0
“cm-1, 1446 and 1413 which is the vibrations of the bending O-H group, according to the report by Reig et ■ RESULTS AND DISCUSSION al.”
Kustiyah 等 - 2022 - Effect of Calcium Carbonate Content on the Mechani DOI: 10.22146/ijc.72135 -
Alkyl C-H confianza 1,0
“The peak at 1446.06 cm-1 was attributed to the -COOCvibration of the -CH 2and -CH groups, respectively.”
Study on the Effect of Fe3+ on Zircon Flotation Separation from Cassiterite Using Sodium Oleate as Collector DOI: 10.3390/min7070108 -
Amide confianza 1,0
“1518 (1) 1519 (2) cm-1 *1,445 C-N Stretch, 1446 (2) 1448 (1) 1448 (1)”
Sessa 和 Woods - 2011 - Purity Assessment of Commercial Zein Products Afte DOI: 10.1007/s11746-011-1765-4 -
confianza 1,0
“absorption peaks around 1130-1230 cm-1, which are related to the asymmetric stretching stretchingvibrationsandthepeakat1446cm-1 canbeattributedtoaromaticC=Cstretching vibrations of Fe-O-Fe.”
Degradation of Diazo Congo Red Dye by Using Synthesized Poly-Ferric-Silicate-Sulphate through Co-Polymerization Process DOI: 10.3390/polym15010237 -
Alkyl C-H confianza 1,0
“cm-1 cal CH stretching at approximately 2943 [16, 17], peaks at 1446 2 cm-1 and 1370 also referring to the CH deformation modes of the CH group 2 cm-1 [18].”
Experimental and DFT studies on the structural and optical properties of chitosan/polyvinyl pyrrolidone/ZnS nanocomposites DOI: 10.1007/s00289-023-04700-0 -
Acetate confianza 1,0
“Therefore, when the material was ◦C, Moreover, the bands observed at 1560 cm-1 and 1446 cm-1 are assigned to C=O vibrations of AcAc heat treated at 1000 it was transformed completely into the monoclinic structure and appears white, bidentat”
Zirconia/Hydroxyapatite Composites Synthesized Via Sol-Gel: Influence of Hydroxyapatite Content and Heating on Their Biological Properties DOI: 10.3390/ma10070757 -
Ring structure confianza 1,0
“In the cm-1) asynchronous spectrum, negative correlations observed between (1446 and 1460 and cm-1 1650 indicates that C = O bond of PVP decreases before a decrease in the bands cm-1 associated with cyclic structures.”
Investigation of Poly(ethersulfone)/Polyvinylpyrrolidone ultrafiltration membrane degradation by contact with sodium hypochlorite through FTIR mapping and two-dimensional correlation spectroscopy DOI: 10.1016/j.polymdegradstab.2019.01.017
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas de literatura, coincidencias de biblioteca y un análisis respaldado por literatura — en segundos.