Was absorbiert bei 1446 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1446 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1446 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 9 | 7 | 1,0 |
| Amide | 7 | 7 | 1,0 |
| Alkene (C=C) | 4 | 4 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| Ester | 3 | 3 | 1,0 |
| Ring structure | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 2 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Nitrogen heterocycle | 2 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Bronsted acid site | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Carbonate | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| PVP | 1446, 2983, 1648 | Alkyl C-H, Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1446 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“Absorption determined the crystallinity factor by using the ratios of the cm-1 observed only at B spectra would peak at ~1446 areas covered under the peaks related to crystalline and in correspond to C-H deformation and aromatic ring vibrat”
Das 等 - 2017 - Extraction of xylem fibers from Musa sapientum and DOI: 10.1007/s12221-017-1187-5 -
Hydroxyl (O-H) Vertrauen 1,0
“cm-1, 1446 and 1413 which is the vibrations of the bending O-H group, according to the report by Reig et ■ RESULTS AND DISCUSSION al.”
Kustiyah 等 - 2022 - Effect of Calcium Carbonate Content on the Mechani DOI: 10.22146/ijc.72135 -
Alkyl C-H Vertrauen 1,0
“The peak at 1446.06 cm-1 was attributed to the -COOCvibration of the -CH 2and -CH groups, respectively.”
Study on the Effect of Fe3+ on Zircon Flotation Separation from Cassiterite Using Sodium Oleate as Collector DOI: 10.3390/min7070108 -
Amide Vertrauen 1,0
“1518 (1) 1519 (2) cm-1 *1,445 C-N Stretch, 1446 (2) 1448 (1) 1448 (1)”
Sessa 和 Woods - 2011 - Purity Assessment of Commercial Zein Products Afte DOI: 10.1007/s11746-011-1765-4 -
Vertrauen 1,0
“absorption peaks around 1130-1230 cm-1, which are related to the asymmetric stretching stretchingvibrationsandthepeakat1446cm-1 canbeattributedtoaromaticC=Cstretching vibrations of Fe-O-Fe.”
Degradation of Diazo Congo Red Dye by Using Synthesized Poly-Ferric-Silicate-Sulphate through Co-Polymerization Process DOI: 10.3390/polym15010237 -
Alkyl C-H Vertrauen 1,0
“cm-1 cal CH stretching at approximately 2943 [16, 17], peaks at 1446 2 cm-1 and 1370 also referring to the CH deformation modes of the CH group 2 cm-1 [18].”
Experimental and DFT studies on the structural and optical properties of chitosan/polyvinyl pyrrolidone/ZnS nanocomposites DOI: 10.1007/s00289-023-04700-0 -
Acetate Vertrauen 1,0
“Therefore, when the material was ◦C, Moreover, the bands observed at 1560 cm-1 and 1446 cm-1 are assigned to C=O vibrations of AcAc heat treated at 1000 it was transformed completely into the monoclinic structure and appears white, bidentat”
Zirconia/Hydroxyapatite Composites Synthesized Via Sol-Gel: Influence of Hydroxyapatite Content and Heating on Their Biological Properties DOI: 10.3390/ma10070757 -
Ring structure Vertrauen 1,0
“In the cm-1) asynchronous spectrum, negative correlations observed between (1446 and 1460 and cm-1 1650 indicates that C = O bond of PVP decreases before a decrease in the bands cm-1 associated with cyclic structures.”
Investigation of Poly(ethersulfone)/Polyvinylpyrrolidone ultrafiltration membrane degradation by contact with sodium hypochlorite through FTIR mapping and two-dimensional correlation spectroscopy DOI: 10.1016/j.polymdegradstab.2019.01.017
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.