What absorbs at 1429 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 1429 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Quick answer
A band near 1429 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Alkyl C-H | 9 | 9 | 1,0 |
| Hydroxyl (O-H) | 5 | 5 | 1,0 |
| Methacrylate | 5 | 5 | 1,0 |
| Acetate | 5 | 5 | 1,0 |
| Carboxyl (COOH) | 5 | 5 | 1,0 |
| Carbonyl (C=O) | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 4 | 4 | 1,0 |
| C-O single bond | 4 | 4 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| Carbonate | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Carbohydrate | 2 | 2 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 1,0 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Possible materials
| Material | Supporting peaks | Overlapping groups | Fuentes citadas |
|---|---|---|---|
| Chitosan | 1429, 1650, 1655 | Alkyl C-H, Acetate, Methacrylate | 1 |
| graphene oxide | 1429, 1150, 3400 | Hydroxyl (O-H), Methacrylate, Acetate | 1 |
| cellulose | 1429, 1735, 1650 | Alkyl C-H, Acetate, Methacrylate | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1429 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura detrás de estas asignaciones
-
Silicate confianza 1,0
“The sodium silicate μL and 100 DMSO per well was added to dissolve the shows the absorption bands around 1429, 970, 864 and cm-1”
Fabrication of Biogenic Silica Nanostructures from Sorghum bicolor Leaves for Food Industry Applications DOI: 10.1007/s12633-020-00379-4 -
Carboxyl (COOH) confianza 1,0
“Atomic Force Microscopy vibrations at 1429 and 1380 showed the surface roughness which up surged with an increase in the concentration of boric acid in”
Reticulated three-dimensional network ablative composites for heat shields in thermal protection systems DOI: 10.1039/c4ra05811a -
confianza 1,0
“ATR-FTIR spectra of different amino acid coKeywords: cm-1 functionalised FITC-GONP showed an increase in the FTIR band intensity at 1429 which was oxide nanoparticles Graphene significantly reduced due to electrostatic/pi-pi interactions of”
Fluorometric estimation of amino acids interaction with colloidal suspension of FITC functionalized graphene oxide nanoparticles DOI: 10.1016/j.apsusc.2016.11.070 -
Hydroxyl (O-H) confianza 1,0
“The peaks at 1429 and 1340 are related to the vibrations of cm-1 the -OH and -CH groups in the pyranose ring.”
Rupiasih 等 - 2018 - Study on Transport Properties of Chitosan Membrane DOI: 10.5614/j.math.fund.sci.2018.50.2.6 -
Alkyl C-H confianza 1,0
“The bands at 1429 1163 1032 and cm-1 β-linked 892 are attributed to C-H bending and C-O-C stretching of glucose subunits.”
Transformation of Oil Palm Waste-Derived Cellulose into Solid Polymer Electrolytes: Investigating the Crucial Role of Plasticizers DOI: 10.3390/polym13213685 -
Carbonyl (C=O) confianza 1,0
“Explicit assignment in text.”
Pyrolysis of Solid Waste for Bio-Oil and Char Production in Refugees’ Camp: A Case Study DOI: 10.3390/en14133861 -
Alkyl C-H confianza 1,0
“1467 (0.03) HC CC/CH asymmetric ring stretch 1429 1447 (0.20) 1433 1450 (0.14)”
Hydrogen Bonding in Human Manganese Superoxide Dismutase Containing 3-Fluorotyrosine DOI: 10.1529/biophysj.105.060616 -
confianza 1,0
“cm-1 The chelated structures are indicated by the bands at 3121 (P1, P2) and are 32cm-1 calcium carbonate, assigned to CaCO 3, and the vibrations specific to CO at 1429 cm-1 (P1) and 1438 (P2) [31] are also present in the FTIR spectra of th”
The Origin and Physico-Chemical Properties of Some Unusual Earth Rock Fragments DOI: 10.3390/app12030983
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.