Was absorbiert bei 1419 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1419 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1419 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carboxyl (COOH) | 9 | 8 | 1,0 |
| Alkyl C-H | 8 | 8 | 1,0 |
| Methacrylate | 6 | 6 | 1,0 |
| Acetate | 6 | 6 | 1,0 |
| C-O single bond | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 4 | 4 | 1,0 |
| Amide | 4 | 3 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| Fatty acid | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Secondary amine | 1 | 0 | 1,0 |
| C n single bond | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| chitosan | 1419, 1650, 1655 | Alkyl C-H, Acetate, Methacrylate | 2 |
| starch | 1419, 1650, 1540 | Methacrylate, Acetate, Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1419 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“C-H rocking of pure 2 cm(cid:3)1 ognized as the cause for the pure PVA absorption peak at PVA is considered the reason for absorption peak at 838 cm(cid:3)1, while C-H deformation vibration has been related 1419”
Metal framework as a novel approach for the fabrication of electric double layer capacitor device with high energy density using plasticized Poly(vinyl alcohol): Ammonium thiocyanate based polymer electrolyte DOI: 10.1016/j.arabjc.2020.08.006 -
Hydroxyl (O-H) Vertrauen 1,0
“Additionally, peaks were found In the case of Riva Light Cure, an initial band was found at 3422 cm-1, indicative of cm-1, COO-, cm-1, near 1636 corresponding to followed by a peak at 1419 corresponding the presence of OH groups.”
Remineralization Potential of Three Restorative Glass Ionomer Cements: An In Vitro Study DOI: 10.3390/jcm12062434 -
Acetate Vertrauen 1,0
“cm-1 cm-1 cm-1 (starch-water interaction), 1150 and 1078 (C-O in C-O-H stretching), 1015 cm-1 cm-1 (C-O in C-O-C stretching), and 1419 (C-O in carbonate stretching).”
Prapruddivongs 和 Wongpreedee - 2020 - Use of eggshell powder as a potential hydrolytic r DOI: 10.1016/j.powtec.2020.05.076 -
C c single bond Vertrauen 1,0
“weak C-H stretching at 3.86.05 3810.57 3859.98 We further observed sharp asymmetric C = O cm-1, cm-1 carboxylate at 1691.28 C-C ring stretching at 1419.30 and C-N stretching of a tertiary amine at cm-1.”
Characterizing and demonstrating the role of Klebsiella SSN1 exopolysaccharide in osmotic stress tolerance using neutron radiography DOI: 10.1038/s41598-023-37133-w -
Alkyl C-H Vertrauen 1,0
“The bands at 1419 belonged to CH deformation vibrations in the CH 2OH groups and the signals 2”
Production and physicochemical characterization of chitosan for the harvesting of wild microalgae consortia DOI: 10.1016/j.btre.2020.e00554 -
Amide Vertrauen 1,0
“be noticed (Figure 3a), the main bands of neat CS are recorded at 3000-3600 cm-1 (a broad band attributed to -OH with maximum at 3457 cm-1 and a shoulder at 3200-3270 cm-1 due to -NH 2 stretching, area a), 1659 cm-1 (amide I), 1585 cm-1 (am”
Microencapsulation of Fluticasone Propionate and Salmeterol Xinafoate in Modified Chitosan Microparticles for Release Optimization DOI: 10.3390/molecules25173888 -
Acetate Vertrauen 1,0
“sharp peaks at and 601 to the triply bending vibrations of PO in 926cm-1 32The characteristic bands of CO identified at correspond to the C-O bending, and the bands at 1419, 1481cm-1 32-17,24-25.”
Asmi 等 - 2016 - Synthesis and Characterisation of Composite based DOI: 10.1063/1.4945463 -
Alkyl C-H Vertrauen 1,0
“Further changes are denoted in the hydroxyl ZnS nanocrystals measured in water and chitosan group attributed to the OH and CH vibrations present cm-1 in the ring (from 1419 and 1316 to 1408 and cm-1, 1341 and their transfer into the water.”
Mechanochemistry of Chitosan-Coated Zinc Sulfide (ZnS) Nanocrystals for Bio-imaging Applications DOI: 10.1186/s11671-017-2103-z
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.