Was absorbiert bei 1283 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1283 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1283 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Methacrylate | 7 | 6 | 1,0 |
| Acetate | 7 | 6 | 1,0 |
| Amide | 6 | 5 | 1,0 |
| C-O single bond | 5 | 4 | 1,0 |
| Alkyl C-H | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 4 | 3 | 1,0 |
| Ketone | 3 | 3 | 1,0 |
| Ester | 3 | 3 | 1,0 |
| Carbonyl (C=O) | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Protein alpha helix | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 0,9 |
| Protein | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| quercetin | 1283, 1745, 1612 | Methacrylate, Acetate, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1283 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Protein alpha helix Vertrauen 1,0
“At lower wavenumber, the bands at cm-1 α-helices 1283 is assigned to of the amide III absorption band owing to in-phase combination of CH stretching and NH bending vibrations [42].”
Gupta 等 - 2022 - In vitro cell composition identification of wood d DOI: 10.1098/rsos.201935 -
Acetate Vertrauen 1,0
“7 of 11 Bioengineering 2016, 3, 34 7 of 11 cm-1 Infra red (IR) spectra (Figure 4) showed intense peaks at 1724 and 1283 corresponding to Infra red (IR) spectra (Figure 4) showed intense peaks at 1724 and 1283 cm-1 corresponding to - -C=O an”
Biodegradable Polymeric Substances Produced by a Marine Bacterium from a Surplus Stream of the Biodiesel Industry DOI: 10.3390/bioengineering3040034 -
Phosphate (PO4) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Chen 等 - 2021 - Synthesis of Novel Arginine-Based Flame Retardant DOI: 10.3390/molecules26123588 -
Phosphate (PO4) Vertrauen 1,0
“The absorption band at cm-1 1283 is assigned to the asymmetric stretching vibration mode of the O-P-O bonding, cm-1 denoted by ν (PO 2).”
El-Damrawi 等 - 2023 - STRUCTURE AND PROPERTIES OF STRONTIUM PHOSPHATE GL DOI: 10.4314/bcse.v37i3.9 -
Acetate Vertrauen 1,0
“However, a strong band at ~1283 cm-1 assigned Slurry evaporation and ethyl acetate”
Garbacz 等 - 2020 - Structural Characterization of Co-Crystals of Chlo DOI: 10.3390/pharmaceutics12070648 -
Carboxyl (COOH) Vertrauen 1,0
“Thus, for instance, the band assigned to the hydroxyl group of p-aminobenzoic acid is shifted from p-aminobenzoic Thus, for instance, the band assigned to the hydroxyl group of acid is shifted from ~1283 cm-1 in the spectra of physical mixt”
Garbacz 和 Wesolowski - 2018 - DSC, FTIR and Raman Spectroscopy Coupled with Mult DOI: 10.3390/molecules23092136 -
Acetate Vertrauen 1,0
“The TEM and 1283 cm-1 corresponding to C=O and C-N of PVP, respectively (Figure 2b).”
Graphene Oxide-Gold Nanorods Nanocomposite-Porphyrin Conjugate as Promising Tool for Cancer Phototherapy Performance DOI: 10.3390/ph14121295 -
Alkyl C-H Vertrauen 1,0
“In addition, absorption bands at 1283 and 1465 attributed to the cm-1 vibration of-CH and at 964 corresponds to the CH out-of-plane vibration [18].”
The Fine-Tuned Release of Antioxidant from Superparamagnetic Nanocarriers under the Combination of Stationary and Alternating Magnetic Fields DOI: 10.3390/antiox10081212
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.