Was absorbiert bei 1167 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1167 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1167 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Methoxy (OCH3) | 9 | 9 | 1,0 |
| Methacrylate | 9 | 9 | 1,0 |
| C-O single bond | 9 | 9 | 1,0 |
| Acetate | 9 | 9 | 1,0 |
| Alkyl C-H | 3 | 3 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Hydrogen bond | 2 | 2 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Ammonium | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polypropylene | 1167, 1030, 1600 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| rGO | 1167, 2358, 2930 | Methacrylate, Acetate, C-O single bond | 1 |
| hydrogels | 1167, 3281, 1700 | Methacrylate, Acetate | 1 |
| lignin | 1167, 1035, 1510 | Methacrylate, Acetate, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1167 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Chhokkar 等 - 2020 - Electrical and Structural Characterization of 100 DOI: 10.1063/5.0023335 -
Acetate Vertrauen 1,0
“FTIR spectra revealed significant peaks at 1167 for C-O-C peak and at 1449 for O-H bending for WPI and rGO, respectively.”
Owonubi 等 - 2018 - Characterization and in vitro release kinetics of DOI: 10.1007/s40090-018-0139-2 -
Ammonium Vertrauen 1,0
“peaks observed after the introduction of NH at 1248, 1425, cm-1, Mn/TiO 2, the peak at 1167 which corresponds to s(NH 3) (cid:228) 3 cm-1 1605, and 1669 correspond to the species that were coordinated to Lewis acid sites, immediately disapp”
Pena 等 - 2004 - Identification of surface species on titania-suppo DOI: 10.1021/jp0313122 -
Amide Vertrauen 1,0
“Comparing the three infrared spectra in Figure 2A, the newly generated peak at 1397 is the cm-1 stretching vibration peak of the C-N-C bond and the peak at 1167 is the stretching vibration peak of the C-N in the amide bond (curve c in Figur”
Inhibition of Poly(ethylenediaminetetraacetic acid-diethanolamine) on Deposition of Calcium Sulfate Crystal in Simulated Industrial Water DOI: 10.3390/cryst10060544 -
Alkyl C-H Vertrauen 1,0
“The peak cm-1 at 1167 in the FTIR spectrum of polypropylene is attributed to the swing vibrations of the C-H bonds in the CH and CH groups [63].”
Thermal and Mechanical Characterization of Coir Fibre–Reinforced Polypropylene Biocomposites DOI: 10.3390/cryst12091249 -
Acetate Vertrauen 1,0
“The bands appearing at ~1167, ~1125 and ~1045 are associated with the C-O-C bending vibration in the propylene oxide group [21,22], while the bands at ~916, ~838 cm-1 are the characteristic bands of the stretching vibrations of the C-S-C bo”
Jamal 等 - 2014 - Solid-State Synthesis and Photocatalytic Activity DOI: 10.3390/ma7053786 -
Acetate Vertrauen 1,0
“cm-1 cm-1 C=O stretching), 1167 and 1104 (both C-O-C stretching), peaks related to 199 cm-1”
Jardine 等 - 2019 - Ginkgo leaf cuticle chemistry across changing pCO( DOI: 10.1007/s12542-017-0384-2. -
Acetate Vertrauen 1,0
“Aromatic skeletal vibrations 1265 C-O stretching of guaiacyl ring 1167 C-O-C symmetrical stretching vibration Thermal Stability Analysis”
Li 等 - 2020 - Structural Elucidation of Lignins from Corncob Aci DOI: 10.1080/02773819408003085
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.