Was absorbiert bei 1028 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1028 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1028 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| C-O single bond | 20 | 20 | 1,0 |
| Methacrylate | 19 | 19 | 1,0 |
| Acetate | 19 | 19 | 1,0 |
| Methoxy (OCH3) | 18 | 18 | 1,0 |
| Hydroxyl (O-H) | 11 | 11 | 1,0 |
| Alkyl C-H | 8 | 7 | 1,0 |
| Carbohydrate | 8 | 7 | 1,0 |
| C c single bond | 5 | 5 | 1,0 |
| Silicon-oxygen (Si-O) | 5 | 4 | 1,0 |
| Amide | 4 | 4 | 1,0 |
| Silicon (Si) | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Phosphate (PO4) | 3 | 3 | 1,0 |
| Siloxane (Si-O-Si) | 3 | 2 | 1,0 |
| N h | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| C#c | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Ammonium | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| S eq o | 1 | 1 | 1,0 |
| Carbon bromine | 1 | 1 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| TiO2 | 1028, 1700, 1093 | Methacrylate, Acetate, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1028 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The TG/DTG results showed four steps of thermal degradation at 44via the peak at 1028 (cid:1)C 148, 219-309, 331-489 and 629-810 due to the existence of Ti moieties along with a polymer * Corresponding author.”
Insight on the structural aspect of ENR-50/TiO2 hybrid in KOH/C3H8O medium revealed by NMR spectroscopy DOI: 10.1016/j.arabjc.2018.05.003 -
Metal oxygen Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Dahham 等 - 2018 - Synthesis and structural studies of an epoxidized DOI: 10.1016/j.polymertesting.2017.11.005 -
Silicon (Si) Vertrauen 1,0
“As the viscosity of the precursor sol is increased, in cm-1 The the peaks from the 1028-1057 range, attributed to case of samples IV and V, the influence of the substrate rotaı(Si-OH) bending vibration mode are noticed in the spectra of tio”
Structural and morphological characterization of Pr3+ and Er3+-containing SiO2–P2O5 sol–gel thin films DOI: 10.1016/j.matchemphys.2011.10.031 -
Acetate Vertrauen 1,0
“1): 900-650cm-1 1028cm-1 The region discriminates fuel oil samples from the 1700 and regions, where the C O and S O 780cm-1 stretchingbandsappear,respectively,andthe900-600cm-1 the other products, mainly the intense peak at (charfinacterist”
Fernandez-Varela 等 - 2006 - Monitoring photooxidation of the Prestige's oil sp DOI: 10.1016/j.talanta.2005.10.006 -
Hydroxyl (O-H) Vertrauen 1,0
“FTIR analysis showed C=O-CH 3, C=C, C-O, and O-H peaks at 1028, 1609,”
Jairath 等 - 2023 - In vitro and in vivo evaluation of Prosopis cinera DOI: 10.47836/ifrj.30.2.06 -
Phosphate (PO4) Vertrauen 1,0
“14(3): 359 Li et al By an esterification cross-linking reaction of corn phosphodiester increased from 1.9 to 66.0 %, starch and STMP, the increased strength of the while RDS content decreased from 86.6 to10.9 cm-1 adsorption peak at 1028 wa”
Li 等 - 2015 - Preparation and In vitro Digestibility of Corn Sta DOI: 10.4314/tjpr.v14i3.1 -
Carbon bromine Vertrauen 1,0
“879 881 879 bending C Br aromatic stretch 1028 1029 1031 1041 1028”
A facile synthesis of poly(aniline-co-o-bromoaniline) copolymer: Characterization and application as semiconducting material DOI: 10.1142/S0217979216500089 -
Carbohydrate Vertrauen 1,0
“Also, the bands at 1028 associated with the presence of cm-1 glucose group, as well as intensities in the 1175-1157 region related to the breakdown of”
Naim 等 - 2022 - ATR-FTIR spectroscopy combined with DNA barcoding DOI: 10.1016/j.vibspec.2022.103446
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.