What absorbs at 970 cm⁻¹ in an FTIR spectrum?
A band near 970 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Szybka odpowiedź
A band near 970 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Możliwe przypisania grup funkcyjnych
| Grupa funkcyjna | Fakty wspierające | Cytowane źródła | Najwyższa wiarygodność |
|---|---|---|---|
| Hydroxyl (O-H) | 11 | 10 | 1,0 |
| Alkyl C-H | 10 | 9 | 1,0 |
| Methacrylate | 9 | 8 | 1,0 |
| Acetate | 9 | 8 | 1,0 |
| Silicon (Si) | 8 | 8 | 1,0 |
| Silicon-oxygen (Si-O) | 8 | 6 | 1,0 |
| Silanol (Si-OH) | 7 | 6 | 1,0 |
| Methoxy (OCH3) | 7 | 6 | 1,0 |
| Alkene (C=C) | 6 | 5 | 1,0 |
| C-O single bond | 6 | 5 | 1,0 |
| Protein | 5 | 5 | 1,0 |
| Phosphate (PO4) | 5 | 5 | 1,0 |
| C c single bond | 5 | 4 | 1,0 |
| Phosphorus | 3 | 3 | 1,0 |
| Carbonyl (C=O) | 3 | 3 | 1,0 |
| Nucleic acid | 3 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Methyl | 2 | 2 | 1,0 |
| C-S single bond | 2 | 2 | 1,0 |
| Thiol | 2 | 2 | 1,0 |
| Siloxane (Si-O-Si) | 2 | 2 | 1,0 |
| Metal oxygen | 2 | 1 | 1,0 |
| Ring structure | 2 | 1 | 1,0 |
| Oxygen heterocycle | 2 | 0 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 1,0 |
| Lipid | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Fatty acid | 1 | 1 | 1,0 |
| Bromine | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Metal hydroxyl | 1 | 0 | 1,0 |
| Silicon carbon | 1 | 0 | 1,0 |
Ranking odzwierciedla zgromadzone dowody literaturowe, a nie pojedynczą autorytatywną zasadę. Zawsze potwierdzaj w kontekście swojej próbki.
Możliwe materiały
| Materiał | Piki potwierdzające | Nakładające się grupy | Cytowane źródła |
|---|---|---|---|
| silica | 970, 1100, 1080 | Hydroxyl (O-H), Alkyl C-H, Methacrylate | 1 |
| DNA | 970, 1712, 1660 | Methacrylate, Acetate | 1 |
| cells | 970, 1741, 1020 | Alkyl C-H, Methacrylate, Acetate | 1 |
Materiały są wyświetlane tylko wtedy, gdy ta sama baza literaturowa potwierdza to pasmo i co najmniej jeden dodatkowy charakterystyczny pik.
Logika widma
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 970 cm⁻¹ is usually not enough for material identification by itself.
Zastosowanie w rzeczywistości
Ten typ zapytania jest powszechny w identyfikacji polimerów, przesiewaniu nieznanych tworzyw sztucznych, rozwiązywaniu problemów z kontrolą jakości, weryfikacji materiałów pochodzących z recyklingu oraz przeglądzie przypisania pików wspartym literaturą.
Częste błędy
- Traktowanie jednego izolowanego pasma jako dowodu materiału bez sprawdzenia co najmniej jednego lub dwóch pików wspierających.
- Ignorowanie nakładania się: wiele grup funkcyjnych może przyczyniać się w pobliżu tej samej liczby falowej.
- Pomijanie walidacji, gdy dodatki, mieszanki, utlenianie lub zanieczyszczenia mogą zniekształcić widmo.
Porada dotycząca weryfikacji
Gdy pozostaje niejednoznaczność, zweryfikuj hipotezę za pomocą DSC, GC-MS lub TGA, szczególnie w przypadku mieszanin, zdegradowanych próbek i wypełnionych polimerów.
Literatura stojąca za tymi przypisaniami
-
Silicon (Si) wiarygodność 1,0
“The presence (SiO)n-, of siloxane groups, attached to the inorganic polymer 1000-1100cm-1 appears as an intense band in the region, with a 970cm-1, which was assigned to the Si O H bending shoulder at frequency.”
Dey 等 - 2008 - Mesoporous silica functionalized with diethylenetr DOI: 10.1016/j.colsurfa.2008.03.030 -
C c single bond wiarygodność 1,0
“In addition, the peak at 970 is attributed to the deoxyribose C-C stretching mode, and it is often used as an internal reference for normalization to lyze the structural changes of dsDNA [34,46].”
Assessing B-Z DNA Transitions in Solutions via Infrared Spectroscopy DOI: 10.3390/biom13060964 -
wiarygodność 1,0
“and symmetric vibration of Si-O-Si bonds at InfraUnmodified 10-15 nanosilica 970cm-1 red analysis of the nanosilica shows a peak around PFOA-modified 170-250 nanosilica”
Ganie 等 - 2020 - Synthesis and Characterization of a New Surface-Mo DOI: 10.1155/2020/8814260 -
Thiol wiarygodność 1,0
“In Fig.1(a) , compared to the spectra of C-S-H, the spectra of C-A-S-H shows much stronger peaks at 970cm-1 cm-1, and 470 which indicates that bridging oxygen numbers and SiO tetrahedral about 4 chain length increases in C-A-S-H respectivel”
He 等 - 2011 - Morphology and Structure of Aluminum Substituted C DOI: 10.4028/www.scientific.net/AMR.287-290.1193 -
Acetate wiarygodność 1,0
“Absent ≅ 2000 SiO2 overtone 2×1000 C=O stretching Medium Negative, Artefact ≅920+1037 1970 SiO2 combination band or 970+1000 [60] C=O stretching”
FTIR photoacoustic spectroscopy for identification and assessment of soil components_ Chernozems and their size fractions DOI: 10.1016/j.pacs.2020.100162 -
C c single bond wiarygodność 1,0
“All the spectra examined consist of typical absorption peaks at about 3300 cm-l by (OH stretching), 3295 cm-' ( h C - H stretching), 2950 cm-l (C-H stretching), Downloaded 2255 cm-l (C%C-hC stretching), 2120 cm-l (C%C stretching), 1360-1300”
LANGER 和 MOSS - 1993 - FTIR STUDIES OF TRIMETHYLENE LINKED BIS-DIACETYLEN DOI: 10.1080/10587259308030157 -
Acetate wiarygodność 1,0
“correlation with wavenumber values attributed to vibrations of (∼970cm-1), C-O DNA base-sugar bonds We have shown that FTIR spectroscopy is a sensitive technique furanose stretching cm-1) cm-1).”
A new approach to studying the effects of ionising radiation on single cells using FTIR synchrotron microspectroscopy DOI: 10.1016/j.radphyschem.2013.03.037 -
Silanol (Si-OH) wiarygodność 1,0
“wavenumber range It is seen that the absorption That is, the absorption peaks at wavenumbers of 1434 and 1089cm(cid:1)1, peaks at wavenumbers of 970 and which are assigned 3452cm(cid:1)1 represent silanol groups (Wagner, 1976).”
Novel epoxidized natural rubber composites with geopolymers from fly ash waste DOI: 10.1016/j.wasman.2019.02.013
Masz widmo z tym pasmem?
Prześlij swoje widmo FTIR i uzyskaj pełny raport interpretacji — przypisania pików z cytowaniami literaturowymi, dopasowania biblioteczne oraz łańcuch dowodów z oceną wiarygodności — w kilka sekund.