Was absorbiert bei 742 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 742 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 742 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 7 | 7 | 1,0 |
| Methacrylate | 4 | 4 | 1,0 |
| Acetate | 4 | 4 | 1,0 |
| Ketone | 3 | 3 | 1,0 |
| Ester | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| Carbonyl (C=O) | 3 | 3 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| PVA | 742, 1660, 2930 | Alkyl C-H, Acetate, Methacrylate | 1 |
| Epoxy | 742, 1660, 1735 | Methacrylate, Acetate, Alkyl C-H | 1 |
| CaO | 742, 2909, 1839 | Methacrylate, Acetate | 1 |
| polyurethane | 742, 2270, 1700 | Alkyl C-H, Methacrylate, Acetate | 1 |
| PLA | 742, 1650, 1073 | Alkyl C-H, Methacrylate, Acetate | 1 |
| epoxy resin | 742, 905, 1100 | Methacrylate, Acetate, Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 742 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The band at cm-1 742 is probably due to the Ca-O bonds [7].”
Characterization of quicklime as raw material to hydrated lime: Effect of temperature on its characteristics DOI: 10.1063/1.5066668 -
C-S single bond Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Mesoporous Magnetic Cysteine Functionalized Chitosan Nanocomposite for Selective Uranyl Ions Sorption: Experimental, Structural Characterization, and Mechanistic Studies DOI: 10.3390/polym14132568 -
Carbonyl (C=O) Vertrauen 1,0
“The corresponding light minus dark FTIR difference spectrum ν(C=O) (Figure 4, in the region black line) shows a sigmoidal cm-1 and a positive peak at band with a negative peak at 1,742 cm-1, that are absent in the difference spectrum of the”
Baserga 等 - 2022 - Membrane Protein Activity Induces Specific Molecul DOI: 10.3389/fmolb.2022.915328 -
Acetate Vertrauen 1,0
“The band at 742 cm-1 is assigned to the CH3 rocking cm-1 CH rocking mode, while 596 and 562 are related to [ νasGa-C 2] and [ νsGa-C 2].”
Synthesis of High Surface Area—Group 13—Metal Oxides via Atomic Layer Deposition on Mesoporous Silica DOI: 10.3390/nano12091458 -
Acetate Vertrauen 1,0
“cm-1, cm-1, cm-1, cm-1, C-CH3 stretching at 1042-1046 cm-1, C-COO vibration assigned to 873 cm-1, (possibly due to the to 1095-1098 C-CH stretching at 1042-1046 C-COO vibration assigned to 873 3 cm-1, presence of CaCO3), C=O stretching assi”
Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure DOI: 10.3390/app7060579 -
C c single bond Vertrauen 1,0
“The third one at 1477 cm-1 was associated with CH-cross deformations in CH 2-groups and the fourth band at 742 cm-1 was assigned to H-C-C-H-bound modes in the CH groups.”
Fernández 等 - 2017 - DOI: 10.17230/ingciencia.13.25.6 -
Phosphate (PO4) Vertrauen 1,0
“The bending modes of the P-O bonds in phosphate groups are responsible for the double peak at 563 and 742 cm-1.”
Synthesis and Characterization of New Composite Materials Based on Magnesium Phosphate Cement for Fluoride Retention DOI: 10.3390/ma16020718 -
Acetate Vertrauen 1,0
“cm-1 (imide carbonyl asymmetric stretching), 1715 (imide carbonyl symmetric stretchcm-1 ing and C=O stretching of carboxylic pendant groups), 1370 (C-N stretching), and cm-1 cm-1 742 (C=O bending).”
Novel Polyimide/Copper-Nickel Ferrite Composites with Tunable Magnetic and Dielectric Properties DOI: 10.3390/polym
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.