Was absorbiert bei 600 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 600 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 600 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 21 | 18 | 1,0 |
| Alkyl C-H | 19 | 18 | 1,0 |
| Hydroxyl (O-H) | 14 | 10 | 1,0 |
| Phosphate (PO4) | 13 | 10 | 1,0 |
| Silicon-oxygen (Si-O) | 12 | 11 | 1,0 |
| Silicon (Si) | 7 | 7 | 1,0 |
| Phosphorus | 5 | 5 | 1,0 |
| Methoxy (OCH3) | 5 | 5 | 1,0 |
| Methacrylate | 5 | 5 | 1,0 |
| C-O single bond | 5 | 5 | 1,0 |
| Acetate | 5 | 5 | 1,0 |
| Aromatic ring | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 4 | 4 | 1,0 |
| Water (H2O) | 4 | 4 | 1,0 |
| Chlorine | 4 | 3 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| Carbonyl (C=O) | 3 | 3 | 1,0 |
| Siloxane (Si-O-Si) | 3 | 3 | 1,0 |
| Sulfate (SO4) | 3 | 2 | 1,0 |
| N-O bond | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Carbonate | 2 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Isothiocyanate | 1 | 1 | 1,0 |
| Metalloid oxygen | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Nitro (NO2) | 1 | 1 | 1,0 |
| Carbon dioxide | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Silicon carbon | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| S s | 1 | 1 | 1,0 |
| Metal sulfur | 1 | 1 | 1,0 |
| N h | 1 | 1 | 0,5 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| CdS | 600, 1375, 1092 | Hydroxyl (O-H) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 600 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydroxyl (O-H) Vertrauen 1,0
“It can be concluded that using acetone and toluene could not result in high chemical grafting, silane on the broken edges, and on the external and internal surfaces of and the decomposition peaks above 600 °C in their DTG curves are layers”
Silane functionalization of sodium montmorillonite nanoclay_ The effect of dispersing media on intercalation and chemical grafting DOI: 10.1016/j.clay.2017.12.020 -
Metal sulfur Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Aziz 等 - 2023 - Water remediation capability of cubic-phase CdS na DOI: 10.15251/DJNB.2023.181.203 -
Hydroxyl (O-H) Vertrauen 1,0
“We validated the signals 1,670cm-1 is consistent with water in strong adsorption band at with DNPH and FDH standards (Sigma Aldrich), with the MS spectrashowninFigure4C,D,respectively.Thesestandardswere the methanol solution, along with the”
Barakoti 等 - 2021 - Formaldehyde Analysis in Non-Aqueous Methanol Solu DOI: 10.3389/fchem.2021.678112 -
Vertrauen 1,0
“The formation of iron oxide NPs was confirmed with these distinctive peaks in the region between [400 and cm-1 600] where these extended peaks corresponded to iron oxide magnetite Fe 3O 4-NPs [30].”
Effect of Ferric Chloride Concentration on the Type of Magnetite (Fe3O4) Nanoparticles Biosynthesized by Aqueous Leaves Extract of Artemisia and Assessment of Their Antioxidant Activities DOI: 10.1007/s10876-020-01868-7 -
Vertrauen 1,0
“This sugand Si-O stretch vibrations lies in the 600 and 700-1200cm-1 2(cid:2)OH gests that the AlM vibration is stronger than that due to region [23].”
Cai 等 - 2007 - A Fourier transform infrared spectroscopic study o DOI: 10.1016/j.saa.2006.02.053 -
Carbonate Vertrauen 1,0
“A broad peak at superimposed on this hump appears at At the hump height decreases, the carbonate peak disappears and many peaks correspond to BST 600◦C appear.”
Datta 和 Agrawal - 2005 - Effect of acetylacetone on the phase formation of DOI: 10.1080/00150190500308611 -
Alkyl C-H Vertrauen 1,0
“achieved the maximum for 20 min and the concentration was cm(cid:1)1, FT-IR spectra showed that acticarbon had the eight charac9 g/1000 g, the transmissivity of the peaks at 3435 2Ostretch,OAH cm(cid:1)1 teristicabsorptionband.AndtheS-Sstre”
Adsorption characteristics of sulfur solution by acticarbon against drinking-water toxicosis DOI: 10.1016/j.sjbs.2016.09.010 -
Phosphate (PO4) Vertrauen 1,0
“Similarly, the peaks cm(cid:3)1 alternative lowering of pH to 4 using dilute nitric acid and raising around 1090, 1040, 961 are characteristic of P-O stretching cm(cid:3)1aredueto the pH to 7 using ammonia solution enhances the process of v”
Geetha 和 Buvaneswari - 2010 - Ammonium hydrogen difluoride induced fluorination DOI: 10.1016/j.materresbull.2010.09.005
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.