Was absorbiert bei 3383 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 3383 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 3383 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Hydroxyl (O-H) | 7 | 7 | 1,0 |
| N h | 5 | 5 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polysaccharide | 3383, 1637, 1320 | Hydroxyl (O-H), N h, Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 3383 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Aromatic ring Vertrauen 1,0
“2 were Fig.4hadpeaksat1608cm-1and1522cm-1whichwerefrom showninFig.3.Flourfromthelargerparticlesizefractionhad cm-1 firmly packed starch granules coated with matrix protein, aromatic C=C bending and a broad peak at 3383 which while the starc”
Qualitative and Quantitative Analysis of Sorghum Grain Composition Including Protein and Tannins Using ATR-FTIR Spectroscopy DOI: 10.1007/s12161-020-01874-5 -
Hydroxyl (O-H) Vertrauen 1,0
“The drug loaded AVA has a strong stretching peak at 3383 which can Np4 be assigned as overlapping stretching peaks of O-H (AV), NH and phenolic O-H (drug).”
Synthesis of Aloevera/Acrylonitrile based Nanoparticles for targeted drug delivery of 5-Aminosalicylic acid DOI: 10.1016/j.ijbiomac.2017.08.085 -
Vertrauen 1,0
“The two peaks at 3383 and Conclusion cm-1 3277 are assigned to the N-H symmetric and asymmetric stretching vibrations [62].”
Heterogeneous kinetics of thiourea electro‐catalytic oxidation reactions on palladium surface in the aqueous medium DOI: 10.1002/asia.202001016 -
Vertrauen 1,0
“2b, it cm-1 -OH surface of titanium, Si element was attributed to APTES, approved that was observably that the vibration peak of around 3383 films thepreparation ofTisubstrates for silane deposition.”
Preparation and characterization of APTES films on modification titanium by SAMs DOI: 10.1016/j.tsf.2011.01.068 -
Hydroxyl (O-H) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Afolabi 等 - 2021 - Evaluation of Lead (II) Removal from Wastewater Us DOI: 10.15244/pjoes/122449 -
N h Vertrauen 1,0
“3309.42cm-1 P2 shows two broad peaks around 3382.97 and (a) Commercial PVC attributed to the stretching vibration of NH primary amines, (b) PolymerP2 ] at 1617, 1513, some bands of stretching vibration C=C(arom) 1437cm-1 ]”
Ammari 等 - 2015 - Structure and Electrical Study of New Chemically M DOI: 10.1155/2015/280325 -
Aromatic ring Vertrauen 1,0
“dpa172d1_B DPA is characterized by bands with maxima at ~691-744 cm-1, 876 cm-1, 1173 cm-1, 1242 dpa173d1_B vibrational modes: the out-of-plane deformation of the benzene ring, deformation of the dpa174d1_B cm-1, 1317 cm-1, 1415 cm-1, 1456-”
The Photoluminescence and Vibrational Properties of Black Phosphorous Sheets Chemically/Electrochemically Functionalized in the Presence of Diphenylamine DOI: 10.3390/polym14214479 -
Amide Vertrauen 1,0
“cm-1, C=C, C-C, and C-N vibrations centered at 3383, 1600, 1423, and 1297 respectively, can be seen”
Purification and Glutaraldehyde Activation Study on HCl-Doped PVA–PANI Copolymers with Different Aniline Concentrations DOI: 10.3390/molecules24010063
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.