Was absorbiert bei 1657 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1657 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1657 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Amide | 36 | 31 | 1,0 |
| Carbonyl (C=O) | 16 | 14 | 1,0 |
| Ester | 10 | 10 | 1,0 |
| Acetate | 10 | 10 | 1,0 |
| Carboxyl (COOH) | 10 | 9 | 1,0 |
| Methacrylate | 9 | 9 | 1,0 |
| Ketone | 9 | 9 | 1,0 |
| Alkyl C-H | 4 | 4 | 1,0 |
| Alkene (C=C) | 4 | 3 | 1,0 |
| Protein | 4 | 2 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| N h | 3 | 3 | 1,0 |
| Hydrogen bond | 2 | 2 | 1,0 |
| Protein alpha helix | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Protein random coil | 2 | 2 | 1,0 |
| Water (H2O) | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Protein beta sheet | 1 | 1 | 1,0 |
| Nitrogen heterocycle | 1 | 1 | 1,0 |
| Nitrile | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| Quinone | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Triglyceride | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1657 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Hydroxyl (O-H) Vertrauen 1,0
“cm-1 In contrast, the broad peaks at 3405 for SiO was attributed to -OH stretching vibrations whereas 2 cm-1 were assigned to -OH bending vibrations, both of which originated the less prominent peaks at 1657 cm-1 from the silanol (Si-OH) gr”
Nanocellulose-silica polyethersulfone hybrid composite stabilized lipase for esterification DOI: 10.1063/1.5125521 -
Amide Vertrauen 1,0
“Bacillus and Micrococcus can be differfrequency value of the Amide I band was lower (1657.27±1.85) entiated from each other since there were several significant for Bacillus species when compared to Micrococcus species differences between t”
Use of Fourier transform infrared spectroscopy for rapid comparative analysis of Bacillus and Micrococcus isolates DOI: 10.1016/j.foodchem.2008.08.063 -
Carbonyl (C=O) Vertrauen 1,0
“4) comes from the 3-formyl carbonyl stretchingandskeletalC-C/C-Nvibrationalbands.Thedeconvolution of the band showed the presence of the two components at 1657cm-1.”
Morishita 和 Tamiaki - 2009 - Specific coupling between the 13-keto carbonyl and DOI: 10.1016/j.saa.2008.09.016 -
Amide Vertrauen 1,0
“The peaks at 1657 and 1547 (CdO cm-1 are due to the amide I stretch) and amide II”
Noguchi 和 Sugiura - 2002 - Flash-induced FTIR difference spectra of the water DOI: 10.1021/bi011954k -
Amide Vertrauen 1,0
“% and 20 mM Tricin 3 cm-1, amide I and amide II bands at 1657 and 1548 were dissolved without bubbling of CO 2-enriched air.”
Noguchi 和 Sugiura - 2003 - Analysis of flash-induced FTIR difference spectra DOI: 10.1021/bi0341612 -
Ester Vertrauen 1,0
“In the amide I region, a large negative peak around Q peak with weak negative side peaks (Figure 3), suggests that CdO cm-1, appeared at 1674 and the peaks at 1699, 1685, 1664, the effect of Q A/Q reduction on the 10a-ester vibration B cm-1”
Suzuki 等 - 2005 - Fourier transform infrared spectrum of the seconda DOI: 10.1021/bi051237g -
Acetate Vertrauen 1,0
“The spectrum of acesulfame-K (Figure 1) reveals a cm-1, strong band at 1657 corresponding to the C=O Sodium saccharine spectrum (Figure 2) show stretching vibration of the amide group (Amide I”
Tosa 等 - 2012 - Simultaneous Determination Of Some Artificial Swee DOI: 10.1063/1.3681976 -
Amide Vertrauen 1,0
“For Collagen 1654 (2000) 4, the amide I signal is centered around the synthetic peptide LAH Elastin 1655 1657cm-1,andthesignalfortheamideIIispresentat1546cm-1, Humanheartvalve Jastrzebskaetal.”
Vidal 和 Mello - 2011 - Collagen type I amide I band infrared spectroscopy DOI: 10.1016/j.micron.2010.09.010
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.