Was absorbiert bei 1405 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1405 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1405 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carboxyl (COOH) | 8 | 8 | 1,0 |
| Methacrylate | 6 | 6 | 1,0 |
| Acetate | 6 | 6 | 1,0 |
| Alkyl C-H | 5 | 5 | 1,0 |
| Methoxy (OCH3) | 5 | 5 | 1,0 |
| C-O single bond | 5 | 5 | 1,0 |
| Amide | 4 | 4 | 1,0 |
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| N h | 3 | 3 | 1,0 |
| N-O bond | 2 | 2 | 1,0 |
| Amino acid | 2 | 2 | 1,0 |
| Carbonate | 2 | 2 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Protein | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 0,9 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polypropylene | 1405, 1030, 1600 | Alkyl C-H, Methacrylate, Acetate | 1 |
| ZnO | 1405, 1400, 3430 | Alkyl C-H, Acetate, Methacrylate | 1 |
| PVA | 1405, 1660, 2930 | Alkyl C-H, Acetate, Methacrylate | 1 |
| AgNPs | 1405, 1232, 1048 | Alkyl C-H, Methacrylate, Acetate | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1405 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“Dobrozhan et al.: Nanocrystalline ZnO films deposited by pulsed spray pyrolysis 1560cm(cid:1)1 can be ascribed to the The bands at 1405 and C-O symmetric and asymmetric stretching vibrations in the”
Dobrozhan 等 - 2015 - Substructural investigations, Raman, and FTIR spec DOI: 10.1002/pssa.201532324 -
Amide Vertrauen 1,0
“4.b, there are two peaks in 1405 and 1614 in Herceptin spectrum that are 6 assigned to amides 1 and 2 similar to all proteins spectra [42].”
Structural, optical and dielectric studies of Ag nanoparticles decorated by herceptin DOI: 10.1016/j.physe.2019.113562 -
Hydroxyl (O-H) Vertrauen 1,0
“FTIR characterization and symmetric carboxylate ion stretch at 1405 It can cm-1 was be observed that the hydroxyl peak of PVA at 3430 Figure 2 shows the FTIR spectra of the raw materials”
Pal 等 - 2006 - Polyvinyl alcohol-glycine composite membranes pre DOI: 10.1088/1748-6041/1/2/001 -
Amide Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Screening and production of a potential extracellular fungal laccase from Penicillium chrysogenum: Media optimization by response surface methodology (RSM) and central composite rotatable design (CCRD) DOI: 10.1016/j.btre.2019.e00344 -
Alkene (C=C) Vertrauen 1,0
“Four measurements per sample were at 1660-1580, 1445, and 1405 cm-1 can be attributed performed, and using the Smoluchowski equation, to the stretching vibrations of C=C/C=O, N-H and”
Verma 和 Goel - 2023 - Nanofabrication and characterization of green-emit DOI: 10.37819/nanofab.008.299 -
N-O bond Vertrauen 1,0
“At high RH, the 3-NO band is 2-NO band for these two frequency cm-1 split into two wide peaks at 1405 and 1346 components.”
Zhang 等 - 2014 - In Situ Observation on the Dynamic Process of Evap DOI: 10.1021/jp412073c -
Acetate Vertrauen 1,0
“The C-O stretching within the polypropylene cm-3 component of the mask waste was assigned to the peaks at about 1405 [19].”
Physical and Chemical Characteristics of Agricultural-Plastic Wastes for Feasibility of Solid Fuel Briquette Production DOI: 10.3390/su142315751 -
Carbonate Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
The Effect of Low-Processing Temperature on the Physicochemical and Mechanical Properties of Bovine Hydroxyapatite Bone Substitutes DOI: 10.3390/ma15082798
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.