What absorbs at 1306 cm⁻¹ in an FTIR spectrum?
A band near 1306 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Câu trả lời nhanh
A band near 1306 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Amide | 5 | 5 | 1,0 |
| Secondary amine | 4 | 4 | 1,0 |
| C n single bond | 4 | 4 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| polyurethane | 1306, 2270, 1700 | Methacrylate, Amide | 1 |
| Polypyrrole | 1306, 1700, 400 | Amide, Secondary amine, C n single bond | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1306 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
Nucleic acid độ tin cậy 1,0
“1338cm(cid:2)1, 993cm(cid:2)1 which was not seen in Bacilwhich is due to nucleic acids, and the which located at that reason the peak at 1306 S.”
Use of Fourier transform infrared spectroscopy for rapid comparative analysis of Bacillus and Micrococcus isolates DOI: 10.1016/j.foodchem.2008.08.063 -
Amide độ tin cậy 1,0
“The peak at 1306.3cm(cid:1)1(-C-N-) are assigned to the asymmetric and symfibers were washed and dried to obtain chitosan/polypyrrole metric stretching vibration of the polypyrrole (PPy), respectcomposite fibers and coded as CS-PPy1.”
Fabrication and Properties of Conductive Chitosan/Polypyrrole Composite Fibers DOI: 10.1080/03602559.2014.935420 -
Amide độ tin cậy 1,0
“As isolated finish enable the peak located at ~2923 Technora fibres contain PPTA sequences similar to Twaron fibres, the spectra display some cm-1 peaks related to the amide functions in common [10]: the peak located at ~1639 is cm-1 is rel”
Derombise 等 - 2009 - Degradation of Technora aramid fibres in alkaline DOI: 10.1016/j.polymdegradstab.2009.07.021 -
Amide độ tin cậy 1,0
“As Technora fibres contain PPTA sequences, Technora and Twaron fibres cm-1 spectra have some peaks related to the amide functions in common: the peak located at ~1639 cm-1 is related to the C=O vibration and the peak at ~1306 is related to”
Influence of finish treatment on the durability of aramid fibers aged under an alkaline environment DOI: 10.1002/app.31534 -
Amide độ tin cậy 1,0
“chalcone carbonyl carbon symmetrical stretching absorption appeared at 1727 An cm-1 absorption band that appeared around 1306 corresponds to C-N stretching and the cm-1 sharp absorption bands that appeared around 1012 and 771 are due to imi”
Synthesis and In Vitro Antimicrobial Evaluation of Photoactive Multi—Block Chalcone Conjugate Phthalimide and 1,8-Naphthalimide Novolacs DOI: 10.3390/polym13111859 -
Amide độ tin cậy 1,0
“Another indication that a trans-form of the secondary cm-1 acyclic amide gives band at 1306 was attributable to amide III band, of (CN)”
Ilic-Stojanovic 等 - 2018 - Thermosensitive hydrogels for modified release of DOI: 10.1080/00914037.2017.1354202 -
C c single bond độ tin cậy 1,0
“cm-1 cm-1 V from C-COO stretching, 1098/1065 cm-1 (amorphous/crystalline) from C-O-C stretching, at β-(1→4) β-(1→4) from glycosidic linkage from inulin, at 1059 and 1270 cm-1 from C-O-C, C-O, and C-C glycosidic linkage from inulin, at 1059”
Synthesis and Characterization of Inulin-Based Responsive Polyurethanes for Breast Cancer Applications DOI: 10.3390/polym12040865 -
Hydroxyl (O-H) độ tin cậy 1,0
“(C-O)h (O-H)h 1696 (O-H)c stretch (C-O)c bending bending stretch 1306 DP-M”
Somphon 和 Makatan - 2019 - Characterization of donepezil prepared by cogrindi DOI: 10.2306/scienceasia1513-1874.2019.45.028
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.