Was absorbiert bei 1269 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1269 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1269 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| C-O single bond | 7 | 6 | 1,0 |
| Methoxy (OCH3) | 6 | 6 | 1,0 |
| Methacrylate | 6 | 6 | 1,0 |
| Acetate | 6 | 6 | 1,0 |
| Phosphate (PO4) | 3 | 3 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| Lignin | 2 | 2 | 1,0 |
| Protein | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 0,8 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| lignin | 1269, 1035, 1510 | Methacrylate, Acetate, C-O single bond | 2 |
| silver nanoparticles | 1269, 1636, 1631 | Methacrylate, Acetate, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1269 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carbonyl (C=O) Vertrauen 1,0
“the variability among the cell wall compositions, we choose not to modwalls were characterized by a set of bands corresponding to ify the default parameters even if the CART models could be improved cm-1) guaiacyl ring breathing with carbon”
Dinant 等 - 2019 - Synchrotron FTIR and Raman spectroscopy provide un DOI: 10.1093/jxb/ery396 -
Aromatic ring Vertrauen 1,0
“+ 9 1270-1260 G ring C-O stretching in G rings 1269 1268 10 1110 Aromatic C H deformation of S rings 1112 1105”
Dong 等 - 2020 - Pyrolysis Products Distribution of Enzymatic Hydro DOI: 10.3390/catal10020187 -
Protein Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
The effect of hyperbaric oxygen therapy on bone macroscopy, composition and biomechanical properties after ionizing radiation injury DOI: 10.1186/s13014-020-01542-2 -
Lignin Vertrauen 1,0
“Standard lignin showed strong absorption bands at 1269 cm-1 and 1210-1220 cm-1, cm-1 cm-1, Standard lignin showed strong absorption bands at 1269 and 1210-1220 assigned to the C-O group of guaiacyl, phenolic O-H, and ether in syringyl and g”
Enhancing Thermal and Mechanical Properties of Ramie Fiber via Impregnation by Lignin-Based Polyurethane Resin DOI: 10.3390/ma14226850 -
Acetate Vertrauen 1,0
“cm-1 Moreover, the peak at 1269.04 represents the C-O stretch of the carboxylic acid group cm-1 attached to the benzene ring, while the peak at 706.59 shows C=C stretching of”
Biodegradation of Azo Dye Methyl Red by Pseudomonas aeruginosa: Optimization of Process Conditions DOI: 10.3390/ijerph19169962 -
Acetate Vertrauen 1,0
“The band at 1269 could be assigned to transition, which demonstrate the presence of polyphethe C-O stretching vibration of carboxylic acids.”
Ismail 等 - 2019 - Medicago polymorpha-mediated antibacterial silver DOI: 10.1515/gps-2018-0030 -
Acetate Vertrauen 1,0
“The aryl-alkyl ether functional appearance of peaks at 2173.8, 2123.6, and 2044.5 cm-1, group was found at the peak of 1269.2 which as attributed to the C-O-C stretching motion.”
James 等 - 2022 - Synthesis and Characterization of Novel Nano-carbo DOI: 10.15376/biores.17.3.4452-4469 -
Protein Vertrauen 1,0
“Amide I + II/Hydroxyapatite (HA) (M:MI) (The ratio between integrated areas of amide I + II cm-1) cm-1)) (1520-1720 for HA (916-1180 and Amide III + Collagen/HA (M:MIII) (The cm-1) ratio between integrated areas of amide III (1210-1270 with”
Influence of hyperbaric oxygen on biomechanics and structural bone matrix in type 1 diabetes mellitus rats DOI: 10.1371/journal.pone.0191694
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.