What absorbs at 1145 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 1145 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Respuesta rápida
A band near 1145 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| C-O single bond | 18 | 18 | 1,0 |
| Methoxy (OCH3) | 17 | 17 | 1,0 |
| Methacrylate | 17 | 17 | 1,0 |
| Acetate | 17 | 17 | 1,0 |
| Amide | 4 | 4 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Alkene (C=C) | 2 | 2 | 1,0 |
| S eq o | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Phospholipid | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Materiales posibles
| Material | Picos de apoyo | Grupos superpuestos | Fuentes citadas |
|---|---|---|---|
| PMMA | 1145, 1722, 1383 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Los materiales se muestran solo cuando el mismo grupo de literatura respalda esta banda y al menos un pico característico adicional.
Lógica de espectro
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1145 cm⁻¹ is usually not enough for material identification by itself.
Uso en el mundo real
Este tipo de consulta es común en la identificación de polímeros, cribado de plásticos desconocidos, resolución de problemas de control de calidad, verificación de materiales reciclados y revisión de asignación de picos respaldada por la literatura.
Errores comunes
- Tratar una banda aislada como prueba de un material sin verificar al menos uno o dos picos de apoyo.
- Ignorando superposición: múltiples grupos funcionales pueden contribuir cerca del mismo número de onda.
- Omitir la validación cuando los aditivos, las mezclas, la oxidación o la contaminación puedan distorsionar el espectro.
Consejo de verificación
Cuando persista la ambigüedad, valide la hipótesis con DSC, GC-MS o TGA, especialmente para mezclas, muestras degradadas y polímeros rellenos.
Literatura detrás de estas asignaciones
-
Acetate confianza 1,0
“Zhou, Limin Wu, Polymer 122-129 4 C-O stretching vibrations 1145 (2011).”
Kumar 和 Sidhu - 2013 - Synthesis and Characterization of PMMA-ZrO2 Nanoco DOI: 10.1063/1.4810163 -
Amide confianza 1,0
“stretching (1534 and 1381 C-O and C-N stretching (1145 and 1013 The RA-CPTMS/TiO composite 2 materials showed both characteristic peaks of TiO and the red amaranth extract, indicating the successful 2”
Kurniawan 等 - 2019 - Selective Betalain Impregnation from Red Amaranth DOI: 10.1063/1.5134613 -
Aromatic ring confianza 1,0
“The 1145cm-1 1080cm-1 absorption peak at and corresponded to the benzene ring =C-H bending vibration 916cm-1 in the plane.”
Li 等 - 2011 - The detection of Cypermethrin on the surface of Ap DOI: 10.4028/www.scientific.net/AMR.287-290.2991 -
Acetate confianza 1,0
“In the glycerol cm(cid:1)1 spectra, the peak intensities at about 1145 and 962 are responsible for C-O stretching [27].”
Interactions between polyols and wheat biopolymers in a bread model system fortified with inulin: A Fourier transform infrared study DOI: 10.1016/j.heliyon.2018. -
Phosphate (PO4) confianza 1,0
“Peaks formed at 1145 cm-1 might also be due to the PO2 group vibration of the phospholipids present in the cold pressed walnut oil.”
Walnut Oil Oleogels as Milk Fat Replacing System for Commercially Available Chocolate Butter DOI: 10.3390/gels8100613 -
Acetate confianza 1,0
“Three -C-O-Cpeaks appear at 1145, 1116, and cm-1, ular segments.”
Yang 等 - 2015 - Effect of molecular weight on conformational chang DOI: 10.1007/s10853-014-8714-1 -
Water (H2O) confianza 1,0
“Therefore, the peak position at 1145 of between SO and water molecules are only slightly weaker 42V the band of SO may be related to MgSO gels present as than those between water molecules, the formation of SIPs (and”
Zhao 等 - 2006 - Magnesium sulfate aerosols studied by FTIR spectro DOI: 10.1021/jp055291i -
Amide confianza 1,0
“[46], the peak at 1145 the amide band that accounts for the peak at 1236 cm-1[45].”
Antibacterial Activity of the Green Synthesized Plasmonic Silver Nanoparticles with Crystalline Structure against Gram-Positive and Gram-Negative Bacteria DOI: 10.3390/nano13081327
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.