Was absorbiert bei 1013 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1013 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1013 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Methacrylate | 5 | 4 | 1,0 |
| Acetate | 5 | 4 | 1,0 |
| Methoxy (OCH3) | 4 | 3 | 1,0 |
| C-O single bond | 4 | 3 | 1,0 |
| Alkyl C-H | 3 | 3 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Adsorbed carbon monoxide | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| chitosan | 1013, 1650, 1655 | Acetate, Methacrylate, C-O single bond | 1 |
| polypyrrole | 1013, 1700, 400 | Methacrylate, Acetate | 1 |
| polysaccharide | 1013, 1637, 1320 | Methacrylate, Acetate, C-O single bond | 1 |
| collagen | 1013, 1408, 1660 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1013 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
C c single bond Vertrauen 1,0
“The cm-1 intense band observed at 1421 and 1382 are corresponds to stretching vibrations of C=O cm-1 and the band at ~ 1013 is due to the C-C bonding [51].”
Hydrothermal synthesis of surfactant assisted Zn doped SnO2 nanoparticles with enhanced photocatalytic performance and energy storage performance DOI: 10.1016/j.jpcs.2020.109407 -
Phosphate (PO4) Vertrauen 1,0
“of PTA peaked at 1013 cm-1 and 989 cm-1 and were assined to the vbirational modes of the another two Raman lines of low intensity at 523 and 218-237 The Raman lines cm-1 cm-1 of PTA peaked at 1013 and 989 and were assined to the vbirational”
The Photoluminescence and Vibrational Properties of Black Phosphorous Sheets Chemically/Electrochemically Functionalized in the Presence of Diphenylamine DOI: 10.3390/polym14214479 -
Acetate Vertrauen 1,0
“cm-1) corresponding to the replacement of OH groups by NH2 groups on shoulder (3345 cm-1, cm-1,and cm-1 the surface of CG [8].We can also identify bands at 1132 1078 1013 cm-1, 1078 cm-1,and 1013 cm-1 the surface of CG [8].We can also ident”
Influence of Reduction with NaBH4 and HCl in Obtaining Amino Derivatives of Cashew Gum and Cytotoxic Profile DOI: 10.3390/polym15132856 -
Alkyl C-H Vertrauen 1,0
“25 of isolated anion 2943/- -/- 2937/- 27-C 25-H 2-N 1-C stretch/C-H -/1013 symm H 1023/1013 1025/1011 C”
Dhumal 等 - 2016 - Molecular Interactions of a Cu-Based Metal-Organic DOI: 10.1021/acs.jpcc.5b10123 -
Alkyl C-H Vertrauen 1,0
“The C-H band in pyrrole appeared at1013cm-1andwasslightlyshiftedtowardsthelowerregion research reported by Wei et al.”
Diauudin 等 - 2020 - Preparation and Characterisation of Polypyrrole-Ir DOI: 10.1155/2020/8762969 -
Amide Vertrauen 1,0
“FTIR spectroscopy measurements indicated the formation of the cm-1 cm-1 scaffold-the amide I and amide II bands between 1013 and 1033 were clearly visible, indicating the presence of C-O stretching (C-O-C).”
Application of Vibrational Spectroscopic Techniques in the Study of the Natural Polysaccharides and Their Cross-Linking Process DOI: 10.3390/ijms24032630 -
Phosphate (PO4) Vertrauen 1,0
“4 For example, measurements perpendicular to c-axis can cm-1 cm-1, result in a phosphate band at ~ 1013 to ~ 1016”
Hammerli 等 - 2021 - Measuring in situ CO2 and H2O in apatite via ATR-F DOI: 10.1007/s00410-021-01858-6 -
Water (H2O) Vertrauen 1,0
“In addition to its large surface area (due to a well-connected pore network structure), the collagen scaffold with elastin exhibited higher crosslinking efficiency (from 74.70% to 88.77%), higher water absorption (from 1012.70% to 1799.06%)”
Functionalised Hybrid Collagen-Elastin for Acellular Cutaneous Substitute Applications DOI: 10.3390/polym15081929
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.