What absorbs at 933 cm⁻¹ in an FTIR spectrum?
A band near 933 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Răspuns rapid
A band near 933 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Atribuiri posibile ale grupelor funcționale
| Grup funcțional | Fapte suport | Surse citate | Încredere maximă |
|---|---|---|---|
| Methoxy (OCH3) | 4 | 4 | 1,0 |
| Methacrylate | 4 | 4 | 1,0 |
| Acetate | 4 | 4 | 1,0 |
| Alkyl C-H | 3 | 3 | 1,0 |
| C-O single bond | 3 | 3 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Silicon (Si) | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Metal oxygen | 2 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
Clasamentul reflectă dovezile acumulate din literatură, nu o singură regulă autoritară. Confirmați întotdeauna în contextul mostrei dvs.
Materiale posibile
| Material | Vârfuri suport | Grupuri suprapuse | Surse citate |
|---|---|---|---|
| Silica | 933, 1100, 1080 | Alkyl C-H, Methacrylate, Acetate | 1 |
| Polypropylene | 933, 1030, 1600 | Alkyl C-H, Methacrylate, Acetate | 1 |
Materialele sunt afișate numai atunci când același grup de literatură susține această bandă și cel puțin un vârf caracteristic suplimentar.
Logica spectrului
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 933 cm⁻¹ is usually not enough for material identification by itself.
Utilizare în condiții reale
Acest tip de interogare este comun în identificarea polimerilor, screeningul materialelor plastice necunoscute, depanarea QC, verificarea materialelor reciclate și revizuirea atribuirii vârfurilor bazată pe literatură.
Greșeli comune
- Tratarea unei benzi izolate ca dovadă a unui material fără a verifica cel puțin unul sau două vârfuri de susținere.
- Ignorând suprapunerea: mai multe grupuri funcționale pot contribui în apropierea aceluiași număr de undă.
- Omiterea validării atunci când aditivii, amestecurile, oxidarea sau contaminarea pot distorsiona spectrul.
Sfat de verificare
Când ambiguitatea rămâne, validați ipoteza prin DSC, GC-MS sau TGA, în special pentru amestecuri, probe degradate și polimeri umpluți.
Literatura din spatele acestor atribuiri
-
încredere 1,0
“It is possible that the new peak of 933.03 eV may be due to Cu (I) species, while the energy band of 935.23 eV could be assumed to be due to Cu”
Ibrahim 等 - 2022 - Effect of Ammonium Sulfide on Sulfidization Flotat DOI: 10.3390/min12101193 -
C c single bond încredere 1,0
“At the length of the wavenumber of 933 another peak also appears, appears, indicating the presence of a C-C bond group.”
Glass Powder Additive on Recycled Polypropylene Filaments: A Sustainable Material in 3D Printing DOI: 10.3390/polym14010005 -
C c single bond încredere 1,0
“The films (C-C in melting temperature is higher for drawn at a higher bands at 933 and 947 (CH rocking);”
Vasanthan 和 Manne - 2013 - Strain-Induced Crystallization and Conformational DOI: 10.1021/ie401783y -
Phosphate (PO4) încredere 1,0
“cm-1, assignments of the phosphate related peaks are as follows: P-O stretching at 776 P-O-C cm-1, cm-1, cmsymmetric stretching at 933 P-O-C assymetric stretching at 1050 P=O at 1240 1.”
An appraisal of the thermal decomposition mechanisms of ILs as potential lubricants DOI: 10.1002/ls.1457 -
Carbohydrate încredere 1,0
“cm-1 (1) Band at 933 (assigned to carbohydrates) is specific for Col fungi (Fig.”
Erukhimovitch 等 - 2010 - Direct identification of potato's fungal phyto-pat DOI: 10.3233/SPE-2010-0483 -
Silicon (Si) încredere 1,0
“XPS A strong peak at 932.54 eV by Cu2p 3/2 EDAX The spectrum revealed the presence of elements like C, N, O, Si and Cu.”
Gupta 等 - 2015 - Silica functionalized Cu(II) catalysed selective o DOI: 10.1007/s12039-015-0902-2 -
Acetate încredere 1,0
“cm-1 cm-1 were observed at 1076 (C-O, axial deformation), 933 cm-1 (characteristic of 3, 6-anhydrogalactose) and 889 (attributed to Fourier transform infrared spectroscopy carbon)[16].”
Hu 等 - 2012 - Preparation of Berbamine Loaded Chitosan-agarose M DOI: 10.1590/S0104-14282012005000073 -
Acetate încredere 1,0
“Firstly in HeLa cells, the band at 933 was assigned to the vibrational mode of the C-O-C ring of deoxyribose in Z-form DNA (Banyay et al., 2003;”
Le Roux 等 - 2015 - Fourier Transform Infrared spectroscopy discloses DOI: 10.1016/S0301-4622
Aveți un spectru cu această bandă?
Încărcați spectrul FTIR și obțineți un raport complet de interpretare — atribuiri de peak-uri cu citări din literatură, potriviri cu biblioteca și un lanț de dovezi cu nivel de încredere — în câteva secunde.