Was absorbiert bei 687 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 687 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 687 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 3 | 3 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Silicon-oxygen (Si-O) | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Bromine | 1 | 1 | 1,0 |
| Carbon bromine | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| polypropylene | 687, 1030, 1600 | Alkyl C-H, C-O single bond | 1 |
| TiO2 | 687, 1700, 1093 | Metal oxygen, Alkyl C-H, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 687 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Metal oxygen Vertrauen 1,0
“The bands cm-1 cm-1 at 300.9 and 347.19 correspond to M-O stretching mode of the octahedral group, and the cm-1 band at 686.66 corresponds to M-O stretching mode tetrahedral group [8, 11, 13].”
Deswardani 等 - 2017 - Study of Structural and Magnetic Properties of Sil DOI: 10.1088/1757-899X/202/1/012047 -
Carbon bromine Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Furoida 和 Ulfa - 2019 - Synthesis of 3-(7-triphenylphosphonioheptyl)-2,6-d DOI: 10.1088/1757-899X/546/6/062008 -
Carboxyl (COOH) Vertrauen 1,0
“The new peak at 1591 in acid equilibrated DHOA was assigned to the amide carbonyl 0.8 cm-1 group interacted with the HNO while the peak at 687 3 Intensity 0.7”
Verma 等 - 2018 - Structural investigations on uranium(VI) and thori DOI: 10.1039/C7NJ04460G. -
Metal oxygen Vertrauen 1,0
“This agrees [PO with the phenomena in the quenched melts observed by Wong.[28] There is no evidence for Fe-O-P and Al-O-P bands in the present slags, as the latter type of bands 687.27cm-1 would result in stretch vibrations with Raman bands”
Wang 等 - 2015 - Effect of P2O5 and FetO on the Viscosity and Slag DOI: 10.1007/s11663-014-0270-1 -
Alkyl C-H Vertrauen 1,0
“While the VIS regression coefficient showed a curve profile with a maximal contribution typical of the 8-hydroxyquinoline-Cd(II) complex [54], the FTIR regression coefficient profile included Kelex 100 characteristic IR vibrational bands at”
Determination of Cadmium (II) in Aqueous Solutions by In Situ MID-FTIR-PLS Analysis Using a Polymer Inclusion Membrane-Based Sensor: First Considerations DOI: 10.3390/molecules25153436 -
Vertrauen 1,0
“of the -OH bonds and vibration via deformation of the bonds in adsorbed surface water molecules, of the -OH bonds and vibration via deformation of the bonds in adsorbed surface water molecules, cm-1 The peak located near 687 is characterist”
Metakaolin-Based Geopolymer with Added TiO2 Particles: Physicomechanical Characteristics DOI: 10.3390/coatings7120233 -
Silicon (Si) Vertrauen 1,0
“The bands at 744 and 687 cm-1 are attributed to the perpendicular Si-O stretching vibration.”
Morphology and Selected Properties of Modified Potato Thermoplastic Starch DOI: 10.3390/polym15071762 -
C-O single bond Vertrauen 1,0
“The peak observed at 687 represents C-OH out-of-plane, denoting the presence of cellulose [91-94].”
Characterization of Thermo-Mechanical and Chemical Properties of Polypropylene/Hemp Fiber Biocomposites: Impact of Maleic Anhydride Compatibilizer and Fiber Content DOI: 10.3390/polym15153271
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.