What absorbs at 532 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 532 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Quick answer
A band near 532 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| Hydroxyl (O-H) | 14 | 12 | 1,0 |
| Methacrylate | 10 | 9 | 1,0 |
| Acetate | 10 | 9 | 1,0 |
| C-O single bond | 8 | 8 | 1,0 |
| Carbonyl (C=O) | 8 | 7 | 1,0 |
| Methoxy (OCH3) | 7 | 7 | 1,0 |
| Carboxyl (COOH) | 7 | 6 | 1,0 |
| Phosphate (PO4) | 6 | 6 | 1,0 |
| Metal oxygen | 6 | 6 | 1,0 |
| Amide | 6 | 5 | 1,0 |
| Ketone | 5 | 4 | 1,0 |
| Ester | 5 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 5 | 4 | 1,0 |
| Silicon (Si) | 5 | 4 | 1,0 |
| Siloxane (Si-O-Si) | 3 | 3 | 1,0 |
| Phosphorus | 3 | 3 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Carbon bromine | 1 | 1 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Metal hydroxyl | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| S s | 1 | 1 | 0,8 |
| Sulfur | 1 | 1 | 0,8 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Possible materials
| Material | Supporting peaks | Overlapping groups | Fuentes citadas |
|---|---|---|---|
| polyaniline | 532, 1565, 1570 | Methacrylate, Acetate | 1 |
| copolymer | 532, 2921, 1540 | Hydroxyl (O-H), Methacrylate, Acetate | 1 |
| polypropylene | 532, 1030, 1600 | Methacrylate, Acetate, Hydroxyl (O-H) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 532 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura detrás de estas asignaciones
-
confianza 1,0
“XPS analysis 31 32 revealed a characteristic peak of Ru 3d at 285 eV as well as a peak at 531.6 eV that was attributed 33 34 to O1s in Ti-O-C bonds.”
Surface Grafting of Ru(II) Diazonium-Based Sensitizers on Metal Oxides Enhances Alkaline Stability for Solar Energy Conversion DOI: 10.1021/acsami.7b16641 -
C-S single bond confianza 1,0
“Copolymer (aqueous) (cm-1) (cm-1) Functional group Wave number Functional group Wave number S bending 762 C S stretching 532 C”
Dey Sadhu 等 - 2020 - Preparation and characterization of polyanilinea DOI: 10.1002/pc.25738 -
Metal hydroxyl confianza 1,0
“cm-1 1635 3433 and 3749 Ammoand 2018), then the wavenumber of 470.63 cm-1 denoted as the Al-Al-OH vibrations nium ions have inserted inside the layer of ben532.35 cm-1 due to has bet- (Zaher MS et al., 2018).”
Hakim 等 - 2023 - Ammonium-Assisted Intercalation of Java Bentonite DOI: 10.12911/22998993/156665 -
Aromatic ring confianza 1,0
“As cm-1 a peak at 532 indicated the peak that is out of plane aromatic C-H deformation [13, 14].”
Synthesis and characterization of Heck-cross coupling 4-(4-nitrostyryl) aniline as potential precursor in Schiff-base synthesis DOI: 10.1063/1.5002293 -
Carboxyl (COOH) confianza 1,0
“The peaks observed in CoO Patel.[46] The C showed peaks at 531.6eV, indicating the presence of MgO XPS correspond with the data reported by sp2 carbon, (1s) peak in Figure 5b at 284.0eV, illustrates the before and after calcination.”
Kgosiemang 等 - 2020 - Green synthesis of magnesium and cobalt oxide nano DOI: 10.1080/24701556.2020.1735422 -
confianza 1,0
“6d) was deconvoluted into two peaks at 530.87eV and 531.89eV sp2 symmetry) and G band is due to bond stretching movement of which refers to Ti-O metallic bond and oxygen residual bonding at the carbon pair in aromatic ring [41].”
Effect of co-sensitization in solar exfoliated TiO2 functionalized rGO photoanode for dye-sensitized solar cell applications DOI: 10.1016/j.mssp.2019.02.027 -
Carbonyl (C=O) confianza 1,0
“It is impossible to onlyhasalittlechangewithonlythefringeturningblack.ThePP/ 23wt% IFR/2wt% FePP does not turn black completely until distinguish inorganic and organic oxygen because the O1s band -- 700sec.Thereasonforchangeincolormaybeduet”
Synergistic effects of ferric pyrophosphate (FePP) in intumescent flameretardant polypropylene DOI: 10.1002/pat.1590 -
Amide confianza 1,0
“The O 1s peak at 530 eV representing C-O group of alcoholic and ether can be fitted into peaks at 529.1eV showing C-O [26] and 531.7 eV showing C=O [27] peaks of lignin, cellulose and hemicellulose.”
Enhanced arsenic (iii) adsorption from aqueous solution by magnetic pine cone biomass DOI: 10.1016/j.matchemphys.2018.09.067
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.