What absorbs at 436 cm⁻¹ in an FTIR spectrum?
A band near 436 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Brzi odgovor
A band near 436 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Moguće dodjele funkcionalnih skupina
| Funkcionalna skupina | Potporni dokazi | Citirani izvori | Najveća pouzdanost |
|---|---|---|---|
| Metal oxygen | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Methacrylate | 2 | 1 | 1,0 |
| Acetate | 2 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Ketone | 1 | 0 | 1,0 |
| Ester | 1 | 0 | 1,0 |
| Carbonyl (C=O) | 1 | 0 | 1,0 |
| Amide | 1 | 0 | 1,0 |
| C c single bond | 1 | 0 | 1,0 |
Rangiranje odražava akumulirane literaturne dokaze, a ne jedno autoritativno pravilo. Uvijek provjerite u kontekstu vašeg uzorka.
Mogući materijali
| Materijal | Potporni vrhovi | Preklapajuće skupine | Citirani izvori |
|---|---|---|---|
| Fe3O4 | 436, 2358, 1673 | Metal oxygen, Alkyl C-H, Methacrylate | 1 |
| TiO2 | 436, 1700, 1093 | Metal oxygen, Alkyl C-H, Methacrylate | 1 |
| goethite | 436, 1470, 696 | Metal oxygen, Carboxyl (COOH) | 1 |
| Fe3O4 nanoparticles | 436, 1673, 1470 | Metal oxygen, Alkyl C-H, Methacrylate | 1 |
Materijali su prikazani samo kada ista literatura podržava ovu traku i barem jedan dodatni karakteristični vrh.
Logika spektra
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 436 cm⁻¹ is usually not enough for material identification by itself.
Upotreba u stvarnom svijetu
Ova vrsta upita uobičajena je u identifikaciji polimera, probiru nepoznate plastike, rješavanju problema u kontroli kvalitete, provjeri recikliranog materijala i pregledu dodjele vrhova potkrijepljenom literaturom.
Uobičajene pogreške
- Tretiranje jedne izolirane vrpce kao dokaza materijala bez provjere barem jednog ili dva podržavajuća pika.
- Zanemarivanje preklapanja: više funkcionalnih skupina može doprinositi u blizini istog valnog broja.
- Preskakanje validacije kada aditivi, mješavine, oksidacija ili kontaminacija mogu izobličiti spektar.
Savjet za provjeru
Kada nejasnoća ostane, validirajte hipotezu pomoću DSC, GC-MS ili TGA, posebno za mješavine, degradirane uzorke i punjene polimere.
Literatura iza ovih dodjela
-
pouzdanost 1,0
“In the low energy region of cm-1 the spectrum, the bond at ~ 436 is assigned to bending vibrations of Ti-O and Ti-O-Ti”
Effects of varying the soaking duration of Eosin Blue sensitized TiO2 photoanodes for dye-sensitized solar cells DOI: 10.1016/j.ijleo.2020.164169 -
Metal oxygen pouzdanost 1,0
“The weak 4 4 cm-1 vibration band detected at 436 could be ascribed to the W-O bending vibration [47].”
Abozaid 等 - 2018 - Characterization of Neodymium Doped Calcium Tungst DOI: 10.2298/SOS1804445A -
Alkyl C-H pouzdanost 1,0
“The intensity of the vibrational bands associated with C-H cm-1) cm-1) 436 stretch (2800-3000 and P-O-C stretch (1028 remain constant.”
Organic and Third Phase in HNO3/TBP/n-Dodecane System: No Reverse Micelles DOI: 10.1080/07366299.2017.1336048 -
Water (H2O) pouzdanost 1,0
“The peak in temperature of 436 °C, which can be attributed to the degradation of the polypropylene ◦C the range 48-95 can be attributed to the moisture loss of the hemp fibre.”
Characterisation of Hemp Fibres Reinforced Composites Using Thermoplastic Polymers as Matrices DOI: 10.3390/polym14030481 -
Aromatic ring pouzdanost 1,0
“and 1,436cm-1, Sm-MOFs tions of aromatic ring skeletons are 1,662 and The structure and morphology of the were 1,112cm-1 C-H field is the deformation vibration of bond of tested by FTIR, XRD, emission scanning electron 762cm-1 is the displa”
Wei 等 - 2022 - Preparation of metal-organic frameworks by microwa DOI: 10.1515/gps-2022-0060 -
Phosphate (PO4) pouzdanost 1,0
“Raman Spectra of bone and Type 2 samples material (demonstrated in Figure 1), (cm-1) Wavenumber Vibration Modes of Type2 Vibration Modes of Bone 436, 590, 988 Symmetric bending of P-O P-0 [5] 4-2 882, 1150 HPO Phosphate [5] 4385, 420 Lower”
Fabrication and Characterisation of Two-Layered Synthetic Titanium-Chitosan Bone Scaffolds DOI: 10.1007/978-3-030-92381-5_73 -
pouzdanost 1,0
“[37] found that the ATR-FTIR spectra of 2O 3-adsorbed 1617 cm-1, 1458 cm-1, and 436 cm-1, respectively, indicating that Fe-O, CH3/COO and -OH in HFO cm-1 humic acid showed two new bands at 1348 and 1470 during the initial time points, which”
Removal of Tetracycline by Hydrous Ferric Oxide: Adsorption Kinetics, Isotherms, and Mechanism DOI: 10.3390/ijerph16224580 -
pouzdanost 0,8
“Absorption peak at 436 cm-1 indicates goethite”
Efficiency of Fe3O4 Nanoparticles with Different Pretreatments for Enhancing Biogas Yield of Macroalgae Ulva intestinalis Linnaeus DOI: 10.3390/molecules26165105
Imate li spektar s ovom vrpcom?
Prenesite svoj FTIR spektar i dobijte potpuno izvješće o interpretaciji — dodjele vrhova s literaturnim citatima, podudaranja knjižnice i lanac dokaza s ocjenom pouzdanosti — u sekundama.