What absorbs at 436 cm⁻¹ in an FTIR spectrum?
A band near 436 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Réponse rapide
A band near 436 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Attributions possibles de groupes fonctionnels
| Groupe fonctionnel | Faits à l＇appui | Sources citées | Confiance maximale |
|---|---|---|---|
| Metal oxygen | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Methacrylate | 2 | 1 | 1,0 |
| Acetate | 2 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Ketone | 1 | 0 | 1,0 |
| Ester | 1 | 0 | 1,0 |
| Carbonyl (C=O) | 1 | 0 | 1,0 |
| Amide | 1 | 0 | 1,0 |
| C c single bond | 1 | 0 | 1,0 |
Le classement reflète les preuves bibliographiques accumulées, et non une règle faisant autorité. Confirmez toujours dans le contexte de votre échantillon.
Matériaux possibles
| Matériel | Pics de support | Groupes chevauchants | Sources citées |
|---|---|---|---|
| Fe3O4 | 436, 2358, 1673 | Metal oxygen, Alkyl C-H, Methacrylate | 1 |
| TiO2 | 436, 1700, 1093 | Metal oxygen, Alkyl C-H, Methacrylate | 1 |
| goethite | 436, 1470, 696 | Metal oxygen, Carboxyl (COOH) | 1 |
| Fe3O4 nanoparticles | 436, 1673, 1470 | Metal oxygen, Alkyl C-H, Methacrylate | 1 |
Les matériaux sont affichés uniquement lorsque le même ensemble de littérature soutient cette bande et au moins un pic caractéristique supplémentaire.
Logique du spectre
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 436 cm⁻¹ is usually not enough for material identification by itself.
Utilisation réelle
Ce type de requête est courant dans l＇identification des polymères, le criblage des plastiques inconnus, le dépannage du contrôle qualité, la vérification des matériaux recyclés et l＇examen de l＇attribution des pics appuyée par la littérature.
Erreurs courantes
- Traiter une bande isolée comme preuve d＇un matériau sans vérifier au moins un ou deux pics de support.
- Ignorer le chevauchement : plusieurs groupes fonctionnels peuvent contribuer près du même nombre d＇onde.
- Sauter la validation lorsque des additifs, des mélanges, l＇oxydation ou la contamination peuvent déformer le spectre.
Conseil de vérification
Lorsque l＇ambiguïté persiste, validez l＇hypothèse avec DSC, GC-MS ou TGA, en particulier pour les mélanges, les échantillons dégradés et les polymères chargés.
Bibliographie derrière ces attributions
-
confiance 1,0
“In the low energy region of cm-1 the spectrum, the bond at ~ 436 is assigned to bending vibrations of Ti-O and Ti-O-Ti”
Effects of varying the soaking duration of Eosin Blue sensitized TiO2 photoanodes for dye-sensitized solar cells DOI: 10.1016/j.ijleo.2020.164169 -
Metal oxygen confiance 1,0
“The weak 4 4 cm-1 vibration band detected at 436 could be ascribed to the W-O bending vibration [47].”
Abozaid 等 - 2018 - Characterization of Neodymium Doped Calcium Tungst DOI: 10.2298/SOS1804445A -
Alkyl C-H confiance 1,0
“The intensity of the vibrational bands associated with C-H cm-1) cm-1) 436 stretch (2800-3000 and P-O-C stretch (1028 remain constant.”
Organic and Third Phase in HNO3/TBP/n-Dodecane System: No Reverse Micelles DOI: 10.1080/07366299.2017.1336048 -
Water (H2O) confiance 1,0
“The peak in temperature of 436 °C, which can be attributed to the degradation of the polypropylene ◦C the range 48-95 can be attributed to the moisture loss of the hemp fibre.”
Characterisation of Hemp Fibres Reinforced Composites Using Thermoplastic Polymers as Matrices DOI: 10.3390/polym14030481 -
Aromatic ring confiance 1,0
“and 1,436cm-1, Sm-MOFs tions of aromatic ring skeletons are 1,662 and The structure and morphology of the were 1,112cm-1 C-H field is the deformation vibration of bond of tested by FTIR, XRD, emission scanning electron 762cm-1 is the displa”
Wei 等 - 2022 - Preparation of metal-organic frameworks by microwa DOI: 10.1515/gps-2022-0060 -
Phosphate (PO4) confiance 1,0
“Raman Spectra of bone and Type 2 samples material (demonstrated in Figure 1), (cm-1) Wavenumber Vibration Modes of Type2 Vibration Modes of Bone 436, 590, 988 Symmetric bending of P-O P-0 [5] 4-2 882, 1150 HPO Phosphate [5] 4385, 420 Lower”
Fabrication and Characterisation of Two-Layered Synthetic Titanium-Chitosan Bone Scaffolds DOI: 10.1007/978-3-030-92381-5_73 -
confiance 1,0
“[37] found that the ATR-FTIR spectra of 2O 3-adsorbed 1617 cm-1, 1458 cm-1, and 436 cm-1, respectively, indicating that Fe-O, CH3/COO and -OH in HFO cm-1 humic acid showed two new bands at 1348 and 1470 during the initial time points, which”
Removal of Tetracycline by Hydrous Ferric Oxide: Adsorption Kinetics, Isotherms, and Mechanism DOI: 10.3390/ijerph16224580 -
confiance 0,8
“Absorption peak at 436 cm-1 indicates goethite”
Efficiency of Fe3O4 Nanoparticles with Different Pretreatments for Enhancing Biogas Yield of Macroalgae Ulva intestinalis Linnaeus DOI: 10.3390/molecules26165105
Avez-vous un spectre avec cette bande ?
Téléchargez votre spectre FTIR et obtenez un rapport d＇interprétation complet — attributions de pics avec citations bibliographiques, correspondances de bibliothèque et une chaîne de preuves avec évaluation de la confiance — en quelques secondes.