Was absorbiert bei 435 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 435 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 435 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 8 | 8 | 1,0 |
| Silicon-oxygen (Si-O) | 4 | 4 | 1,0 |
| Silicon (Si) | 4 | 4 | 1,0 |
| Siloxane (Si-O-Si) | 3 | 3 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Carbohydrate | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Nitro (NO2) | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| ZnO | 435, 1400, 3430 | Metal oxygen | 1 |
| zinc oxide | 435, 1627, 1638 | Metal oxygen | 1 |
| NiO | 435, 1006, 1450 | Metal oxygen | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 435 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Nitro (NO2) Vertrauen 1,0
“3,5 3,0 loss of 35.4% of the sample is presented with DTG peaks at 434.8 °C, AgNP+AH 2,5 and 476.7 attributed to the decomposition to NO 2,O and 2 °C, Ag.”
Antimycotic nail polish based on humic acid‐coated silver nanoparticles for onychomycosis DOI: 10.1002/jctb.6676 -
Metal oxygen Vertrauen 1,0
“The band at 599 and 509 corresponds (COO-)[24].TheZn-Ostretchingvibration todeformation nanoparticles δ bandwasfoundat435cm-1 forZnO-GWNPs[21,22,25].The FT-IR was carried out in order to find out the functional shifts in Zn-O band is due to”
Dhayalan 等 - 2021 - Eco friendly synthesis and characterization of zin DOI: 10.1515/nanofab-2020-0104 -
Metal oxygen Vertrauen 1,0
“cm-1 cm-1 numbers~ 435 558 Out of these the bands at 435 and 558 appears to be strong, attributed to metal oxygen (M-O) contribution.”
Rai 和 Thakur - 2017 - Effect of co-substitution on structural, optical, DOI: 10.1016/j.jallcom.2016.11.407 -
Amide Vertrauen 1,0
“1), (1335cm-1),14 (998cm-1) 169 C-N stretching Si-O-Si stretching and Mg-N stretching (a small hump 435cm-1).”
Removal of hazardous pollutants from wastewater: Catalytic applications of Mg nanoparticle functionalized aminoclay DOI: 10.1016/j.molliq.2019.112005 -
Vertrauen 1,0
“The peak at 435 of charge carriers modifies valence and conduction confinement is ascribed to Zn-O stretching vibration [22,23].”
Combustion synthesis, characterization and Raman studies of ZnO nanopowders DOI: 10.1016/j.saa.2011.05.043 -
Vertrauen 1,0
“Peaks at 435 38 cm-1 581 are assigned to magnetite stretching vibration bonds of Fe-O at tetrahedral and octahedral sites [38].”
Rekaby 等 - 2020 - Influence of cobalt addition and calcination tempe DOI: 10.1088/2053-1591/ab65de -
Metal oxygen Vertrauen 1,0
“FTIR analysis cm-1 Fe-O bands at 435, 574 and 627 for the biopolymer-mediated synthesis of magnetite nanoparticles have”
Structural characterization of mesoporous magnetite nanoparticles synthesized using the leaf extract of Calliandra haematocephala and their photocatalytic degradation of malachite green dye DOI: 10.1007/s13204-018-0698-8 -
Vertrauen 1,0
“From the FTIR data, we came to know that all the samples have displayed peaks cm-1 between 435 and 449 which may be due to Ni-”
Facile soft chemical synthesis and characterisation of novel cobalt doped nickel oxide based nanostr DOI: 10.1080/10667857.2020.1824147
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.