What absorbs at 2650 cm⁻¹ in an FTIR spectrum?
A band near 2650 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 5 cited sources
Quick answer
A band near 2650 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Возможные назначения функциональных групп
| Функциональная группа | Подтверждающие факты | Цитируемые источники | Максимальная достоверность |
|---|---|---|---|
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
Ранжирование отражает накопленные литературные данные, а не единственное авторитетное правило. Всегда проверяйте в контексте вашего образца.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2650 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Литература, лежащая в основе этих назначений
-
Carbonyl (C=O) достоверность 1,0
“[34,35], band at 2650 and carbonyl band centred at 1693 This spectroscopic result, combined with microscopic”
Ferrant 等 - 2022 - An innovative multi-analytical strategy to assess DOI: 10.1016/j.culher.2022.04.007 -
Acetate достоверность 1,0
“~2650 cm-1 γ-lactones and anhydrides C=O stretch.”
Morsch 等 - 2017 - Investigating the Photocatalytic Degradation of Oi DOI: 10.1021/acsami.7b00638 -
Hydroxyl (O-H) достоверность 1,0
“O-H indicate that these two polymers are fully cm-1 band between 2650 and 2600 amorphous in nature as there were no sharp υ O-H, represented the i.e., strong hydrogen prominent peaks.”
Sahoo 等 - 2011 - Structural Analysis of Ciprofloxacin-Carbopol Poly DOI: 10.4314/tjpr.v10i3.14 -
Hydroxyl (O-H) достоверность 1,0
“thick) using sputter ion coater and examined with SEM cm-1 range of 3450 to 3400 was assigned to polymeric υ and O-H (JEOL JSM-6480LV) equipped with a backscattered electron cm-1 hydrogen bonding, the band between 2650 and 2600 detector for”
Sahoo 等 - 2011 - Qualitative analysis of controlled release ciprofl DOI: 10.4103/2231-4040.85541 -
Hydroxyl (O-H) достоверность 0,5
“Broad peak, likely O-D or O-H, but not explicitly assigned.”
Tanaka 等 - 2005 - FT-IR study on behavior of surface hydroxyls under DOI: 10.13182/FST05-A917
Есть спектр с этой полосой?
Загрузите свой FTIR-спектр и получите полный отчет об интерпретации — назначение пиков с цитированием литературы, совпадения с библиотекой и цепочку доказательств с оценкой достоверности — за секунды.