Was absorbiert bei 2050 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 2050 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 2050 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Adsorbed carbon monoxide | 4 | 3 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Nitrile | 1 | 1 | 1,0 |
| Silicon hydride | 1 | 1 | 0,5 |
| Alkyl C-H | 1 | 0 | 1,0 |
| Thiocyanate | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 2050 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Nitrile Vertrauen 1,0
“(cid:4)C 500 Following the heating of 4 at 500 for 0.2 h, the ATR FTIR C≡N revealed that the stretching frequencies between 2050 and cm(cid:3)1 confirming 2200 disappeared, thereby that the third stage of masslossduringtheTGAbelongstothedec”
Gerber 和 Erasmus - 2018 - Electronic effects of metal hexacyanoferrates An DOI: 10.1016/j.matchemphys.2017.09.029 -
Vertrauen 1,0
“the absolute FTIR spectra also showed a significant peak at 2050 Analysis of the "light' cm-1, minus 'dark' difference spectra showed four very sharp CO stretching bands at 1970 1977 cm-1, cm-1, cm-1, 1981 and 1985 previously assigned to th”
Liu 等 - 2012 - Structural changes that occur upon photolysis of t DOI: 10.1016/j.bbabio.2011.12.010. -
Adsorbed carbon monoxide Vertrauen 1,0
“A weak band was also observed at below 0.15V by SFG measurements as adsorbed CO derived from methanol on Pt(100) in addition to the main atop CO band at 2050cm-1.”
Sato 等 - 2007 - Adsorptionoxidation of CO on highly dispersed Pt DOI: 10.1016/j.electacta.2007.05.007 -
Vertrauen 1,0
“An additional FTIR band at 2050 1 assigned to CO was detected and was found to increase during UV irradiation due to the adsorption of molecular CO on Pt/TiO 2.”
Belhadj 等 - 2017 - Mechanisms of Simultaneous Hydrogen Production and DOI: 10.1021/acscatal.7b01312 -
Adsorbed carbon monoxide Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Buso-Rogero 等 - 2014 - Formic acid electrooxidation on thallium-decorated DOI: 10.1039/c4cp00304g -
Acetate Vertrauen 1,0
“The broad and very weak band centered at 2050 has been assigned to 2 C-O-S impurity groups due to contamination of the raw materials [10,12].”
Pamukchieva 等 - 2012 - IR studies of impurities in chalcogenide glasses a DOI: 10.1088/1742-6596/356/1/012047 -
C=n Vertrauen 1,0
“The C=N stretching vibrations in the polyaniline's quinonoid and benzenoid rings account for the 2135 cm-1 and 2050 cm-1 peaks, while the C-N stretching vibration was responsible for the 1875 cm-1 peak.”
Fabrication of Enhanced UV Protective Cotton Fabric Using Activated Nano-Biocarbon Derived from Teff Hay Grafted by Polyaniline: RSM-Based Optimization and Characterization DOI: 10.3390/molecules28135142 -
Adsorbed carbon monoxide Vertrauen 1,0
“On the Pt(111) without nickel two main CO bands are observed, at 2050 and 1825 that can be ascribed to on top and bridge CO, respectively [41].”
Sarabia 等 - 2018 - Underpotential deposition of Nickel on platinum si DOI: 10.1016/j.jelechem.2017.11.033
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.