Was absorbiert bei 1780 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1780 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1780 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Carbonyl (C=O) | 18 | 14 | 1,0 |
| Carboxyl (COOH) | 9 | 7 | 1,0 |
| Amide | 8 | 6 | 1,0 |
| Ester | 7 | 5 | 1,0 |
| Methacrylate | 6 | 4 | 1,0 |
| Ketone | 6 | 4 | 1,0 |
| Acetate | 6 | 4 | 1,0 |
| Anhydride | 3 | 3 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Protein | 2 | 2 | 1,0 |
| Ring structure | 2 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Imide | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Lipid | 1 | 1 | 1,0 |
| Phospholipid | 1 | 1 | 0,8 |
| Alkene (C=C) | 1 | 0 | 1,0 |
| Metal oxygen | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Polyurethanes | 1780, 1740, 1728 | Amide, Carbonyl (C=O), Ester | 1 |
| polystyrene | 1780, 1020, 1600 | Carbonyl (C=O), Amide | 1 |
| polyimide | 1780, 1720, 1778 | Amide, Carbonyl (C=O), Carboxyl (COOH) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1780 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Lipid Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Depciuch 和 Parlinska-Wojtan - 2018 - Comparing dried and liquid blood serum samples of DOI: 10.1016/j.jpba.2017.11.074 -
Carbonyl (C=O) Vertrauen 1,0
“cm(cid:3)1 bands at 1780 and 1857 with appearance of a new The ester carbonyl bond was deconvoluted to find out the cm(cid:3)1 carbonyl band at (cid:2)1730 assigned to ester and carboxdifferent ester groups formed by the reaction of anomeri”
Galgali 等 - 2007 - Sugar-linked biodegradable polymers Regio-specifi DOI: 10.1016/j.carbpol.2006.06.035 -
Anhydride Vertrauen 1,0
“Two small peaks at 1780 and 1856cm-' are cyclic anhydride peaks caused by the BTDA, which is present in a slight stoichiometric excess 17 LIQUID CRYSTAL ALIGNMENT A b S 0 r b a n 2014 C e October 1200 1400 1800 1600 1000 28 W ers avenumb 05”
Ha 等 - 1998 - Polarized Infrared Spectroscopic Studies of Polari DOI: 10.1080/10587259808025380 -
Carboxyl (COOH) Vertrauen 1,0
“The peaks at 2858 and 2956 cm-1 in the presence of O-H acid are found in Figures 4 Thepeaksat2858and2956cm-1 The peaks at 2858 and 2956 cm-1 in the presence of O-H acid are found in Figures 4 and 5, while carboxylic acid is found in the pea”
A Parametric Study on a Diesel Engine Fuelled Using Waste Cooking Oil Blended with Al2O3 Nanoparticle—Performance, Emission, and Combustion Characteristics DOI: 10.3390/su13137195 -
Protein Vertrauen 1,0
“and (iv) the appearance of two IR bands According to Figure 5, the IR spectrum of protein G is dominated by two IR bands with maxima at 1699 and 1780 cm-1, both assigned to the C=O vibrational mode whose cm-1, at 1518 and 1634 which were as”
Optical Evidence for the Assembly of Sensors Based on Reduced Graphene Oxide and Polydiphenylamine for the Detection of Epidermal Growth Factor Receptor DOI: 10.3390/coatings11020258 -
Carbonyl (C=O) Vertrauen 1,0
“observed in the carbonyl region of the IR spectrum of cm(cid:2)1 The high wavenumber feature, growing at 1780 PC (peak 60BM films exposed to light and air, can be assigned to two 1), is more difficult to assign because carbonyl peaks at hig”
Brumboiu 等 - 2022 - Photooxidation of PC60BM new insights from spectr DOI: 10.1039/d2cp03514f -
Amide Vertrauen 1,0
“Infrared absorptions between 1780 and 1620 cm-1 indicated the presence of the carbonyl group (amide I), whereas bands 1550-1510 cm-1 ascribed deformation vibrations of N-H groups (amide II) and 1242-1240 cm-1 C-O stretching of the carbonate”
Branched Polyurethanes Based on Synthetic Polyhydroxybutyrate with Tunable Structure and Properties DOI: 10.3390/polym10080826 -
Carbonyl (C=O) Vertrauen 1,0
“The FTIR cm-1, cm-1 spectra exhibited absorption bands of the imide rings at ~1780 and ~1720 attributed to the asymmetric and symmetric stretching vibration of the carbonyl group in the five-membered”
Azobenzene Functionalized “T-Type” Poly(Amide Imide)s vs. Guest-Host Systems— A Comparative Study of Structure-Property Relations DOI: 10.3390/ma13081912
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.