What absorbs at 1768 cm⁻¹ in an FTIR spectrum?
A band near 1768 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 3 cited sources
Snel antwoord
A band near 1768 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mogelijke functionele-groeptoewijzingen
| Functionele groep | Ondersteunende feiten | Geciteerde bronnen | Hoogste vertrouwen |
|---|---|---|---|
| Carbonyl (C=O) | 3 | 3 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| N h | 1 | 1 | 1,0 |
Ranglijst weerspiegelt cumulatief literatuurbewijs, niet één gezaghebbende regel. Bevestig altijd aan de hand van uw monsterecontext.
Mogelijke materialen
| Materiaal | Ondersteunende pieken | Overlappende groepen | Geciteerde bronnen |
|---|---|---|---|
| polyimide | 1768, 1720, 1778 | Carbonyl (C=O), Methacrylate | 1 |
Materialen worden alleen getoond wanneer dezelfde literatuurpool deze band en ten minste één extra karakteristieke piek ondersteunt.
Spectrumlogica
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1768 cm⁻¹ is usually not enough for material identification by itself.
Gebruik in de praktijk
Dit type query komt vaak voor bij polymeeridentificatie, screening van onbekende kunststoffen, probleemoplossing bij QC, verificatie van gerecycled materiaal en literatuurondersteunde beoordeling van piektoewijzing.
Veelgemaakte fouten
- Het behandelen van een enkele geïsoleerde band als bewijs van een materiaal zonder ten minste een of twee ondersteunende pieken te controleren.
- Overlap negeren: meerdere functionele groepen kunnen bijdragen rond hetzelfde golfgetal.
- Validatie overslaan wanneer additieven, mengsels, oxidatie of verontreiniging het spectrum kunnen verstoren.
Advies voor verificatie
Wanneer dubbelzinnigheid blijft bestaan, valideer de hypothese met DSC, GC-MS of TGA, vooral voor mengsels, gedegradeerde monsters en gevulde polymeren.
Literatuur achter deze toewijzingen
-
vertrouwen 1,0
“ence electrode with a scan rate of 100 mV is attributed to N-H stretching vibration and the cm(cid:2)1 cm(cid:2)1 vibration at around 1768 Under these conditions, the cyclic voltammetry of and 1712 aristhe polyimide shows two pairs of rever”
Chao 等 - 2007 - Electroactive polyimide with oligoaniline in the m DOI: 10.1016/j.eurpolymj.2007.03.048 -
Acetate vertrouwen 1,0
“cm1 cm-1 Peak at 1768 obtained was due to C=O whereas at 1713 the peak corresponded to cm-1 cm-1 benzene ring.”
Bhattacharyya 等 - 2017 - Metallization and APPJ treatment of bismaleimide DOI: 10.1155/2010/987357 -
Acetate vertrouwen 1,0
“The disappearance of the νas(α-C=O) band with the maximum at 1768 cm-1 occurs relatively quickly, while the νs(β-C=O) band intensity at 1758 cm-1 decreases more slowly.”
Tisovsky 等 - 2017 - Effect of Structure on Charge Distribution in the DOI: 10.3390/molecules22111961
Heeft u een spectrum met deze band?
Upload uw FTIR-spectrum en ontvang binnen enkele seconden een volledig interpretatierapport — piektoewijzingen met literatuurverwijzingen, bibliotheekovereenkomsten en een met vertrouwen beoordeelde bewijsketen.