Was absorbiert bei 1448 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1448 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1448 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 10 | 9 | 1,0 |
| Amide | 4 | 3 | 1,0 |
| Methyl | 3 | 3 | 1,0 |
| Acetate | 3 | 3 | 1,0 |
| Secondary amine | 3 | 2 | 1,0 |
| C n single bond | 3 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Lipid | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| rGO | 1448, 2358, 2930 | Acetate, Alkyl C-H, Amide | 2 |
| PVA | 1448, 1660, 2930 | Alkyl C-H, Acetate, Amide | 1 |
| cellulose | 1448, 1735, 1650 | Alkyl C-H, Acetate, Amide | 1 |
| hemicellulose | 1448, 1730, 897 | Alkyl C-H, Acetate, Amide | 1 |
| Nanotubes | 1448, 1735, 1630 | Alkyl C-H, Acetate | 1 |
| GO | 1448, 1720, 1182 | Acetate, Alkyl C-H, Amide | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1448 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Cristian 等 - 2015 - Removal of zinc ions from model wastewater system DOI: 10.1016/j.jwpe.2015.08.001 -
Amide Vertrauen 1,0
“Including cm-1 cm-1 the peak corresponding to amide II, two peaks at 1448 and 1078 are similar to the peaks at 1446 and”
Analysis of the ex-vivo transformation of semen, saliva and urine as they dry out using ATR-FTIR spectroscopy and chemometric approach DOI: 10.1038/s41598-021-91009-5 -
Alkyl C-H Vertrauen 1,0
“The FT-IR peak at 2950 cm-1 represents asymmetric C-H stretching of methyl (CH 3) groups whereas the peak at 1448 is attributed to bending of methylene groups and both of these peaks were of higher intensity in acute serum samples.”
Lymphatic filarial serum proteome profiling for identification and characterization of diagnostic biomarkers DOI: 10.1371/journal. -
Alkyl C-H Vertrauen 1,0
“cm-1 The peaks centered at 1448 and 1156 in the PVA spectrum are originated from the stretching vibrations of C-H and O-H, respectively, revealing the PVA content cm-1 in the nanofibers.”
Investigation of chemical bonding and electronic network of rGO/PANI/PVA electrospun nanofiber DOI: 10.1007/s00289-020-03442-7 -
Alkyl C-H Vertrauen 1,0
“The hydrocarbon characteristics absorption peaks at 1662 cm-1, 1448 cm-1, are shown in Figure 3.”
Potency of Urea-Treated Halloysite Nanotubes for the Simultaneous Boosting of Mechanical Properties and Crystallization of Epoxidized Natural Rubber Composites DOI: 10.3390/polym13183068 -
Alkene (C=C) Vertrauen 1,0
“The important absorption peaks indicating stretching vibrations of C=C bonds, bending vibrations of CH2 and CH3 groups, and out of plane deformation of =C-H groups were found at 1662 cm-1, 1448 cm-1 and 1375 cm-1, and 837 cm-1 respectively.”
Selectively Etched Halloysite Nanotubes as Performance Booster of Epoxidized Natural Rubber Composites DOI: 10.3390/polym13203536 -
Amide Vertrauen 1,0
“7b), while cm1 cm1 the 1448 (N-C-N asymmetric stretching) and the 1247 peak (C-N stretching, amine) can be linked to the urea byproduct(Piasek Z.”
Azrak 等 - 2021 - Controlled Dispersion and Setting of Cellulose Nan DOI: 10.21203/rs.3.rs-376512/v1 -
Alkyl C-H Vertrauen 1,0
“Bands of methyl vibrations occur near 1448 Similar to the carbonyl bands of PET and PC, an IR band of”
Optical photothermal infrared spectroscopy with simultaneously acquired Raman spectroscopy for two-dimensional microplastic identification DOI: 10.1038/s41598-022-23318-2
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.