Was absorbiert bei 1218 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1218 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1218 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| C-O single bond | 10 | 10 | 1,0 |
| Methoxy (OCH3) | 8 | 8 | 1,0 |
| Methacrylate | 8 | 8 | 1,0 |
| Acetate | 8 | 8 | 1,0 |
| Alkyl C-H | 4 | 4 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| S eq o | 2 | 2 | 1,0 |
| Oxygen heterocycle | 2 | 2 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Sulfonyl | 1 | 1 | 1,0 |
| Sulfate (SO4) | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 0,6 |
| Protein | 1 | 1 | 0,6 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| iron oxide | 1218, 1130, 891 | Methoxy (OCH3), Methacrylate, Acetate | 1 |
| silver nanoparticles | 1218, 1636, 1631 | Methacrylate, Acetate, C-O single bond | 1 |
| epoxy | 1218, 1660, 1735 | Methacrylate, Acetate, C-O single bond | 1 |
| iron oxide nanoparticles | 1218, 2972, 528 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1218 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Alkyl C-H Vertrauen 1,0
“Weak bands at 1218 and 1088 indicate the presence of C-H and C-O stretching of alcohols, carboxylic acids, ester and, ether groups respectively.By comparing the spectrum of the as iron oxide nanoparticles each other, Fig.”
Green Synthesis of Iron Oxide Nanoparticles by Aqueous Leaves Extract of Mentha Pulegium .L: Effect of Ferric Chloride Concentration on The Type of Product DOI: 10.1016/j.matlet.2020.127364 -
Alkyl C-H Vertrauen 1,0
“(2020), the to O-H stretch, while the peaks at 2972, 1375, and 1218 cm-1 heating process to diatomite waste at 400 °C increases could be attributed to C-H stretching vibration.”
Hamdiani 和 Shih - 2021 - A Green Method for Synthesis of Silver-Nanoparticl DOI: 10.22146/ijc.63573 -
Amide Vertrauen 1,0
“Summary of molecular vibration of PBS chromophore (cm-1) Group Wavenumber, 𝝂 700 C-H bending 754 C-H bending of 776 C-H bending 1079 S=O stretching Pre-pro 1218 C-N stretching 1289 C-N stretching 1330 S=O stretching 1402 S=O stretching 1427”
Power-Dependent Nonlinear Optical Behaviours of Ponceau BS Chromophore at 532 nm via Z-Scan Technique DOI: 10.1016/j.jphotochem.2020.112574 -
Alkyl C-H Vertrauen 1,0
“C-H stretching vibration of 1218cm(cid:1)1 As3þ in treated samples indicated the alkyl chains that attributed to the presence of As3þ presence of polysaccharides in the EPS samples.”
Saba 等 - 2019 - Potential role of bacterial extracellular polymeri DOI: 10.1080/10889868.2019.1602107 -
Acetate Vertrauen 1,0
“In addition, a C=O peak observed at 1699 The peaks appearing at 1218 cm-1 belonged to the C-O stretching of the ester group in all cm-1, in addition to a peak at 1413 corresponded to the CH detected in all samples.”
Structural Conformation Comparison of Different Clear Aligner Systems: An In Vitro Study DOI: 10.3390/dj10050073 -
Alkyl C-H Vertrauen 1,0
“The intensity of the C-O-C band at 960-900 cm-1, corresponding to the C-H out-of-plane bending of the benzene and the O-C cm-1 band at 1218 is reduced after 30 min and the reduction becomes more pronounced after 60 min.”
Arslan 等 - 2018 - Ring-Opening Polymerization of 1,3-Benzoxazines vi DOI: 10.3390/polym10030239 -
Amide Vertrauen 1,0
“The stretching vibration at 1225-1218 corresponds to the cm-1 C-N linkage [33,36] in the urethane group, while the band at 1218 is assigned to S and G ring breathing in lignin [37], with both bands visible in all three formulations”
Synthesis and Characterizations of Eco-Friendly Organosolv Lignin-Based Polyurethane Coating Films for the Coating Industry DOI: 10.3390/polym14030416 -
Carboxyl (COOH) Vertrauen 1,0
“Indeed the bands at 1218 and 1280 can be [43,44]underambientlightduringthe24hdryingofthepaint(see n(C-O) attributed to of carboxylic acids radiooxidative products.”
A FTIR/chemometrics approach to characterize the gamma radiation effects on iodine/epoxy-paint interactions in Nuclear Power Plants DOI: 10.1016/j.aca.2017.01.005
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.