Was absorbiert bei 1044 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1044 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1044 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| C-O single bond | 16 | 16 | 1,0 |
| Acetate | 14 | 14 | 1,0 |
| Methoxy (OCH3) | 13 | 13 | 1,0 |
| Methacrylate | 13 | 13 | 1,0 |
| Carbohydrate | 5 | 5 | 1,0 |
| Phosphate (PO4) | 4 | 3 | 1,0 |
| Silicon-oxygen (Si-O) | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 3 | 3 | 1,0 |
| Siloxane (Si-O-Si) | 2 | 2 | 1,0 |
| C c single bond | 2 | 2 | 1,0 |
| Nucleic acid | 2 | 2 | 1,0 |
| S eq o | 2 | 2 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Thiol | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Fatty acid | 1 | 1 | 1,0 |
| Thiocarbonyl | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Urethane | 1 | 1 | 0,9 |
| Aldehyde (CHO) | 1 | 1 | 0,9 |
| Alkyl C-H | 1 | 1 | 0,7 |
| Phospholipid | 1 | 1 | 0,7 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| cellulose | 1044, 1735, 1650 | Acetate, Methacrylate, C-O single bond | 1 |
| lignin | 1044, 1035, 1510 | Methacrylate, Acetate, C-O single bond | 1 |
| kraft lignin | 1044, 1744, 1710 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| chitosan | 1044, 1650, 1655 | Acetate, Methacrylate, C-O single bond | 1 |
| glycerol | 1044, 1585, 1630 | Methacrylate, Acetate, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1044 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“Another cm-1 obvious sharp peak credited to the C-O stretching is observed at 1044, 1043, and 1039”
Structural, Electrical and Electrochemical Properties of Glycerolized Biopolymers Based on Chitosan (CS): Methylcellulose (MC) for Energy Storage Application DOI: 10.3390/polym13081183 -
Acetate Vertrauen 1,0
“However, as the number of lithium ions increased, the interactions between the lithium ions and the oxygen atoms (C=O) in the acetate ions or the carboxylate ions became more cm-1 dominant, and therefore the intensity of the peak at 1044 de”
Mobarak 等 - 2015 - Carboxymethyl Carrageenan Based Biopolymer Electro DOI: 10.1016/j.electacta.2015.02.200 -
Vertrauen 1,0
“x cm-1, cm-1, He/O 1044 Si-O-Si network stretch at 1107 and Si-O-Si the treated sample compared to the O ashed film can be 2 2 cm-1.”
Vinogradova 等 - 2008 - Application of deuterium exchange to analyze moist DOI: 10.1149/1.2947786(cid:2) -
Carbohydrate Vertrauen 1,0
“expressive increase in the intensity of the peaks near 1044 and 1075 Lipids cm(cid:5)1, related to soluble sugars in general, structural carbohydrates and Nucleicacids components with phosphorus in its composition.”
Modelling the vigour of maize seeds submitted to artificial accelerated ageing based on ATR-FTIR data and chemometric tools (PCA, HCA and PLS-DA) DOI: 10.1016/j.heliyon.2020.e03477 -
Acetate Vertrauen 1,0
“The highest peaks at 1086 and cm-1 1044 are ascribed to the C-O stretch absorption bands, which are important regions for ethanol 1044 cm-1 are ascribed to the C-O stretch absorption bands, which are important regions for ethanol and methan”
Application of Functional Data Analysis and FTIR-ATR Spectroscopy to Discriminate Wine Spirits Ageing Technologies DOI: 10.3390/math8060896 -
N-O bond Vertrauen 1,0
“~1456 ~1403 and 1236 Howcm-1/1038 cm-1 ever, the spectral absorption bands of malignant and benign samples in ~1044 cm-1/876 cm-1 and ~884 regions showed no significant differences.”
ATR-FTIR spectroscopy as adjunct method to the microscopic examination of hematoxylin and eosin-stained tissues in diagnosing lung cancer DOI: 10.1371/journal.pone.0233626 -
Acetate Vertrauen 1,0
“Among 401 cm-1 them, the absorption at 1044 was mainly attributed to C-O stretching on C-O-C 402”
Beltramino 等 - 2016 - Optimization of sulfuric acid hydrolysis condition DOI: 10.1007/s10570-016-0897-y -
S eq o Vertrauen 1,0
“The S=O stretching vibration of DMSO appears at 1044 cm-1 at 1044 and will therefore not overlap with any C=O vibrations of interest in the and will therefore not overlap with any C=O vibrations of interest in the analytes.”
The Effect of Sample Preparation Techniques on Lignin Fourier Transform Infrared Spectroscopy DOI: 10.3390/polym15132901
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.