O que absorve em 1006 cm⁻¹ em um espectro FTIR?
Uma banda próxima a 1006 cm⁻¹ pode apontar para vários grupos funcionais. Abaixo estão as atribuições mais prováveis, classificadas pela quantidade de evidências publicadas que suportam cada uma — todas rastreáveis à literatura (DOI) e validadas cruzadamente com nossos mais de 130.000 espectros de referência e gráfico de conhecimento.
Backed by 8 cited sources
Resposta rápida
Uma banda próxima de 1006 cm⁻¹ é geralmente interpretada verificando quais grupos funcionais co-ocorrem repetidamente ali na literatura, e então confirmando pelo menos um ou dois picos adicionais na mesma amostra. Esta página classifica essas atribuições por evidência acumulada, em vez de por uma única regra fixa de livro-texto.
Possíveis atribuições de grupos funcionais
| Grupo funcional | Fatos de suporte | Fontes citadas | Maior confiança |
|---|---|---|---|
| Silicon (Si) | 4 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 3 | 3 | 1,0 |
| Alkyl C-H | 3 | 3 | 1,0 |
| C-O single bond | 3 | 0 | 1,0 |
| Siloxane (Si-O-Si) | 2 | 2 | 1,0 |
| S eq o | 2 | 1 | 1,0 |
| Methoxy (OCH3) | 2 | 0 | 1,0 |
| Methacrylate | 2 | 0 | 1,0 |
| Acetate | 2 | 0 | 1,0 |
| Carbonyl (C=O) | 2 | 0 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 0 | 1,0 |
A classificação reflete evidências acumuladas da literatura, não uma regra fixa única. Sempre confirme com o contexto da sua amostra.
Materiais possíveis
| Material | Picos de suporte | Grupos sobrepostos | Fontes citadas |
|---|---|---|---|
| chitosan | 1006, 1650, 1655 | Alkyl C-H, C-O single bond | 1 |
| NiO | 1006, 1450, 432 | Alkyl C-H, C-O single bond | 1 |
| graphene oxide | 1006, 1150, 3400 | C-O single bond, Alkyl C-H | 1 |
| chitin | 1006, 1650, 1655 | Alkyl C-H, C-O single bond | 1 |
| polypropylene | 1006, 1030, 1600 | Alkyl C-H, C-O single bond | 1 |
Os materiais são mostrados apenas quando o mesmo conjunto de literatura suporta esta banda e pelo menos um pico característico adicional.
Lógica do espectro
Esta banda se torna significativa apenas quando lida com seus picos vizinhos. Na prática, os analistas primeiro olham as atribuições acima, depois verificam se a mesma amostra também mostra outros picos esperados para o mesmo motivo estrutural. Uma banda isolada perto de 1006 cm⁻¹ geralmente não é suficiente para identificação de material por si só.
Uso no mundo real
Este tipo de consulta é comum em identificação de polímeros, triagem de plásticos desconhecidos, solução de problemas de CQ, verificação de materiais reciclados e revisão de atribuição de picos apoiada pela literatura.
Erros comuns
- Tratar uma banda isolada como prova de um material sem verificar pelo menos um ou dois picos de suporte.
- Ignorando sobreposição: vários grupos funcionais podem contribuir próximo ao mesmo número de onda.
- Ignorar a validação quando aditivos, misturas, oxidação ou contaminação podem distorcer o espectro.
Conselho de verificação
Quando a ambiguidade persistir, valide a hipótese com DSC, GC-MS ou TGA, especialmente para misturas, amostras degradadas e polímeros carregados.
Literatura por trás destas atribuições
-
Amino acid confiança 1,0
“1006 is the phenylalanine peak, 1400 and 1200 are the”
Yadav 等 - 2021 - Evaluation of tire derived rubber (TDR) fixed biof DOI: 10.1080/09593330.2020.1737736 -
Alkyl C-H confiança 1,0
“Besides, the bands attributed to S = O (1006 and C-H stretching cm-1), 4-1 cm-1), of the benzene ring of DBSA (1030 HSO of H 2SO (1168 and C-N vibra4”
Synthesis, Characterization and Electrochemical Performance of a Redox-Responsive Polybenzopyrrole@Nickel Oxide Nanocomposite for Robust and Efficient Faraday Energy Storage DOI: 10.3390/nano12030513 -
Alkyl C-H confiança 1,0
“ATR-FTIR analysis of Pt surface after TOH treatment (Figure 3B) cm(cid:2)1 C-H showed bands at 1006, 892, 853, 809 and 743 (phenolic vi3.4.”
Detection of carvacrol in essential oils by electrochemical polymerization DOI: 10.1016/j.heliyon.2020.e03714 -
Silicon (Si) confiança 1,0
“clay and in modified clay were observed at 1114, 1030, and Rapid elemental analysis from fluorine (F) to uranium (U) 1006cm-1 wasdoneinXRF.Thesensitivitywasfrom<1ppmupto100% , respectively, due to Si-O stretching.”
Biswas 等 - 2017 - Facile Preparation of Biocomposite from Prawn Shel DOI: 10.1155/2017/6472131 -
Siloxane (Si-O-Si) confiança 1,0
“The Si-Oand Si-O-Si vibrations 1006cm-1 1683cm-1 1627cm-1 and in the kaolinite are detected at are illustrated by the bands at 1114, 1030, and”
Guessoum 等 - 2012 - Effects of Kaolin Surface Treatments on the Thermo DOI: 10.1155/2012/549154 -
C c single bond confiança 1,0
“The in-plane bending mode is located at 1006 cm-1 The peak located in IR spectrum at 854 is generated by the out-of-plane bendγ(C-C-H) ing mode of groups.”
Growth, crystal structure, Hirshfeld surface and vibrational properties of a new supramolecular hybrid material: (C4H7N2)2TeBr6 DOI: 10.1007/s00289-021-04053-6 -
Silicon (Si) confiança 1,0
“Both peaks from 1036 cm-1 and 1006 cm-1 in the GO-ZnO-APTS spectrum can be assigned to the Si-O-Si bond [31], while the one at 1378 cm-1 is ascribed to the O-H deformations of the C-OH groups [44].”
Synthesis and Characterization of Some Graphene Oxide Powders Used as Additives in Hydraulic Mortars DOI: 10.3390/app112311330 -
Silicon (Si) confiança 1,0
“cm-1, difference In the region 1006 cm-1, there was a difference in the peak intensity of the thermal-aged and the In the region 1006 there was a in the peak intensity of the thermal-aged and the water-aged samples, due to Si-O stretch vibr”
Shaik 和 Karuppaiyan - 2020 - Effect of Ageing on the Tracking Characteristics o DOI: 10.3390/ma13102242
Tem um espectro com esta banda?
Carregue seu espectro FTIR e obtenha um relatório de interpretação completo — atribuições de pico com citações da literatura, correspondências de biblioteca e uma análise apoiada pela literatura — em segundos.