Was absorbiert bei 1006 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1006 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1006 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Silicon (Si) | 4 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 3 | 3 | 1,0 |
| Alkyl C-H | 3 | 3 | 1,0 |
| C-O single bond | 3 | 0 | 1,0 |
| Siloxane (Si-O-Si) | 2 | 2 | 1,0 |
| S eq o | 2 | 1 | 1,0 |
| Methoxy (OCH3) | 2 | 0 | 1,0 |
| Methacrylate | 2 | 0 | 1,0 |
| Acetate | 2 | 0 | 1,0 |
| Carbonyl (C=O) | 2 | 0 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| chitosan | 1006, 1650, 1655 | Alkyl C-H, C-O single bond | 1 |
| NiO | 1006, 1450, 432 | Alkyl C-H, C-O single bond | 1 |
| graphene oxide | 1006, 1150, 3400 | C-O single bond, Alkyl C-H | 1 |
| chitin | 1006, 1650, 1655 | Alkyl C-H, C-O single bond | 1 |
| polypropylene | 1006, 1030, 1600 | Alkyl C-H, C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1006 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Amino acid Vertrauen 1,0
“1006 is the phenylalanine peak, 1400 and 1200 are the”
Yadav 等 - 2021 - Evaluation of tire derived rubber (TDR) fixed biof DOI: 10.1080/09593330.2020.1737736 -
Alkyl C-H Vertrauen 1,0
“Besides, the bands attributed to S = O (1006 and C-H stretching cm-1), 4-1 cm-1), of the benzene ring of DBSA (1030 HSO of H 2SO (1168 and C-N vibra4”
Synthesis, Characterization and Electrochemical Performance of a Redox-Responsive Polybenzopyrrole@Nickel Oxide Nanocomposite for Robust and Efficient Faraday Energy Storage DOI: 10.3390/nano12030513 -
Alkyl C-H Vertrauen 1,0
“ATR-FTIR analysis of Pt surface after TOH treatment (Figure 3B) cm(cid:2)1 C-H showed bands at 1006, 892, 853, 809 and 743 (phenolic vi3.4.”
Detection of carvacrol in essential oils by electrochemical polymerization DOI: 10.1016/j.heliyon.2020.e03714 -
Silicon (Si) Vertrauen 1,0
“clay and in modified clay were observed at 1114, 1030, and Rapid elemental analysis from fluorine (F) to uranium (U) 1006cm-1 wasdoneinXRF.Thesensitivitywasfrom<1ppmupto100% , respectively, due to Si-O stretching.”
Biswas 等 - 2017 - Facile Preparation of Biocomposite from Prawn Shel DOI: 10.1155/2017/6472131 -
Siloxane (Si-O-Si) Vertrauen 1,0
“The Si-Oand Si-O-Si vibrations 1006cm-1 1683cm-1 1627cm-1 and in the kaolinite are detected at are illustrated by the bands at 1114, 1030, and”
Guessoum 等 - 2012 - Effects of Kaolin Surface Treatments on the Thermo DOI: 10.1155/2012/549154 -
C c single bond Vertrauen 1,0
“The in-plane bending mode is located at 1006 cm-1 The peak located in IR spectrum at 854 is generated by the out-of-plane bendγ(C-C-H) ing mode of groups.”
Growth, crystal structure, Hirshfeld surface and vibrational properties of a new supramolecular hybrid material: (C4H7N2)2TeBr6 DOI: 10.1007/s00289-021-04053-6 -
Silicon (Si) Vertrauen 1,0
“Both peaks from 1036 cm-1 and 1006 cm-1 in the GO-ZnO-APTS spectrum can be assigned to the Si-O-Si bond [31], while the one at 1378 cm-1 is ascribed to the O-H deformations of the C-OH groups [44].”
Synthesis and Characterization of Some Graphene Oxide Powders Used as Additives in Hydraulic Mortars DOI: 10.3390/app112311330 -
Silicon (Si) Vertrauen 1,0
“cm-1, difference In the region 1006 cm-1, there was a difference in the peak intensity of the thermal-aged and the In the region 1006 there was a in the peak intensity of the thermal-aged and the water-aged samples, due to Si-O stretch vibr”
Shaik 和 Karuppaiyan - 2020 - Effect of Ageing on the Tracking Characteristics o DOI: 10.3390/ma13102242
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.