Hvad absorberer ved 1006 cm⁻¹ i et FTIR-spektrum?
Et bånd nær 1006 cm⁻¹ kan pege på flere funktionelle grupper. Nedenfor er de mest sandsynlige tildelinger, rangeret efter hvor meget publiceret bevis der understøtter hver — hver enkelt spores til litteratur (DOI) og krydsvalideres mod vores 130.000+ referencespektre og vidensgraf.
Backed by 8 cited sources
Hurtigt svar
Et bånd nær 1006 cm⁻¹ fortolkes normalt ved at kontrollere, hvilke funktionelle grupper der gentagne gange forekommer der i litteraturen, og derefter bekræfte mindst en eller to yderligere peaks i den samme prøve. Denne side rangerer disse tildelinger efter akkumuleret evidens snarere end efter en enkelt fast lærebogsregel.
Mulige funktionelle gruppetildelinger
| Funktionel gruppe | Understøttende fakta | Citerede kilder | Højeste tillid |
|---|---|---|---|
| Silicon (Si) | 4 | 4 | 1,0 |
| Silicon-oxygen (Si-O) | 3 | 3 | 1,0 |
| Alkyl C-H | 3 | 3 | 1,0 |
| C-O single bond | 3 | 0 | 1,0 |
| Siloxane (Si-O-Si) | 2 | 2 | 1,0 |
| S eq o | 2 | 1 | 1,0 |
| Methoxy (OCH3) | 2 | 0 | 1,0 |
| Methacrylate | 2 | 0 | 1,0 |
| Acetate | 2 | 0 | 1,0 |
| Carbonyl (C=O) | 2 | 0 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Amino acid | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 0 | 1,0 |
Rangering afspejler akkumuleret litteraturevidence, ikke en enkelt fast regel. Bekræft altid mod din prøvekontekst.
Mulige materialer
| Materiale | Understøttende toppe | Overlappende grupper | Citerede kilder |
|---|---|---|---|
| chitosan | 1006, 1650, 1655 | Alkyl C-H, C-O single bond | 1 |
| NiO | 1006, 1450, 432 | Alkyl C-H, C-O single bond | 1 |
| graphene oxide | 1006, 1150, 3400 | C-O single bond, Alkyl C-H | 1 |
| chitin | 1006, 1650, 1655 | Alkyl C-H, C-O single bond | 1 |
| polypropylene | 1006, 1030, 1600 | Alkyl C-H, C-O single bond | 1 |
Materialer vises kun, når den samme litteraturpulje understøtter dette bånd og mindst en yderligere karakteristisk top.
Spektrumlogik
Dette bånd bliver meningsfuldt kun, når det læses sammen med sine nabotoppe. I praksis ser analytikere først på tildelingerne ovenfor, og kontrollerer derefter, om den samme prøve også viser andre toppe, der forventes for det samme strukturelle motiv. Et enkelt bånd nær 1006 cm⁻¹ er normalt ikke nok til materialeidentifikation alene.
Anvendelse i virkeligheden
Denne type forespørgsel er almindelig ved polymeridentifikation, screening af ukendt plast, fejlfinding i kvalitetskontrol, verifikation af genanvendt materiale og litteraturunderstøttet gennemgang af peak-tildeling.
Almindelige fejl
- Behandling af et isoleret bånd som bevis på et materiale uden at kontrollere mindst en eller to understøttende toppe.
- Ignorerer overlap: flere funktionelle grupper kan bidrage nær samme bølgetal.
- Spring validering over, når additiver, blandinger, oxidation eller forurening kan forvrænge spektret.
Verifikationsrådgivning
Når tvetydighed fortsat består, valider hypotesen med DSC, GC-MS eller TGA, især for blandinger, nedbrudte prøver og fyldte polymerer.
Litteratur bag disse tildelinger
-
Amino acid tillid 1,0
“1006 is the phenylalanine peak, 1400 and 1200 are the”
Yadav 等 - 2021 - Evaluation of tire derived rubber (TDR) fixed biof DOI: 10.1080/09593330.2020.1737736 -
Alkyl C-H tillid 1,0
“Besides, the bands attributed to S = O (1006 and C-H stretching cm-1), 4-1 cm-1), of the benzene ring of DBSA (1030 HSO of H 2SO (1168 and C-N vibra4”
Synthesis, Characterization and Electrochemical Performance of a Redox-Responsive Polybenzopyrrole@Nickel Oxide Nanocomposite for Robust and Efficient Faraday Energy Storage DOI: 10.3390/nano12030513 -
Alkyl C-H tillid 1,0
“ATR-FTIR analysis of Pt surface after TOH treatment (Figure 3B) cm(cid:2)1 C-H showed bands at 1006, 892, 853, 809 and 743 (phenolic vi3.4.”
Detection of carvacrol in essential oils by electrochemical polymerization DOI: 10.1016/j.heliyon.2020.e03714 -
Silicon (Si) tillid 1,0
“clay and in modified clay were observed at 1114, 1030, and Rapid elemental analysis from fluorine (F) to uranium (U) 1006cm-1 wasdoneinXRF.Thesensitivitywasfrom<1ppmupto100% , respectively, due to Si-O stretching.”
Biswas 等 - 2017 - Facile Preparation of Biocomposite from Prawn Shel DOI: 10.1155/2017/6472131 -
Siloxane (Si-O-Si) tillid 1,0
“The Si-Oand Si-O-Si vibrations 1006cm-1 1683cm-1 1627cm-1 and in the kaolinite are detected at are illustrated by the bands at 1114, 1030, and”
Guessoum 等 - 2012 - Effects of Kaolin Surface Treatments on the Thermo DOI: 10.1155/2012/549154 -
C c single bond tillid 1,0
“The in-plane bending mode is located at 1006 cm-1 The peak located in IR spectrum at 854 is generated by the out-of-plane bendγ(C-C-H) ing mode of groups.”
Growth, crystal structure, Hirshfeld surface and vibrational properties of a new supramolecular hybrid material: (C4H7N2)2TeBr6 DOI: 10.1007/s00289-021-04053-6 -
Silicon (Si) tillid 1,0
“Both peaks from 1036 cm-1 and 1006 cm-1 in the GO-ZnO-APTS spectrum can be assigned to the Si-O-Si bond [31], while the one at 1378 cm-1 is ascribed to the O-H deformations of the C-OH groups [44].”
Synthesis and Characterization of Some Graphene Oxide Powders Used as Additives in Hydraulic Mortars DOI: 10.3390/app112311330 -
Silicon (Si) tillid 1,0
“cm-1, difference In the region 1006 cm-1, there was a difference in the peak intensity of the thermal-aged and the In the region 1006 there was a in the peak intensity of the thermal-aged and the water-aged samples, due to Si-O stretch vibr”
Shaik 和 Karuppaiyan - 2020 - Effect of Ageing on the Tracking Characteristics o DOI: 10.3390/ma13102242
Har du et spektrum med dette bånd?
Upload dit FTIR-spektrum og få en fuld fortolkningsrapport — peak-tildelinger med litteraturhenvisninger, biblioteksmatch og en litteraturunderstøttet analyse — på få sekunder.