Was absorbiert bei 959 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 959 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 959 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Phosphate (PO4) | 6 | 6 | 1,0 |
| Alkyl C-H | 3 | 3 | 1,0 |
| Chlorine | 2 | 2 | 1,0 |
| Phosphorus | 2 | 2 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| PVC | 959, 834, 1195 | Alkyl C-H, Chlorine | 2 |
| PMMA | 959, 1722, 1383 | Alkyl C-H | 1 |
| SiO2 | 959, 1739, 699 | Alkyl C-H | 1 |
| zinc oxide | 959, 1627, 1638 | Alkyl C-H | 1 |
| zinc oxide nanoparticles | 959, 1744, 1627 | Alkyl C-H | 1 |
| hydroxyapatite | 959, 1620, 1639 | Phosphate (PO4), Alkyl C-H, Phosphorus | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 959 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Phosphate (PO4) Vertrauen 1,0
“The predominate peak at cm-1 reflection (ATR)/Fourier transform 959 due to the stretching mode infrared (FTIR) and confocal Raman of phosphate was also found in the microspectroscopies were used to Raman spectrum of corneal calcified Taipei”
Chen 等 - 2006 - Corneal calcification chemical composition of cal DOI: 10.1007/s00417-005-1191-0 -
Phosphate (PO4) Vertrauen 1,0
“The black line cm-1 ((cid:2) ((cid:2) 959 phosphate stretching) and 873 carbonate mode) displays pixel locations from which the single pixel IR spectra 1 2 displayed in Fig.”
Chiou 等 - 2011 - FT-IR microscopic imaging of calcified deposit of DOI: 10.1016/j.vibspec.2011.06.004 -
Silicon (Si) Vertrauen 1,0
“The peak at 959 and 781 assigned modified and surface modified ZnO nanoparticles, the Contact angle for Si-O bonding in VTES has disappear in VTES modified ZnO nano-”
Surface modification of zinc oxide nanoparticles by vinyltriethoxy silane (VTES) DOI: 10.1016/j.inoche.2020.108347 -
Vertrauen 1,0
“1 FTIR spectra of a LiCF 3SO 3, b PVC, and c PVC:LiCF 3SO (50:50) system 3 15:413-420 Ionics (2009) 415 C-H and wave numbers exhibited by PVC are stretching cm-1, mode observed at 2,911 CH deformation mode at 2 cm-1, cm-1, C-H trans C-H 1,3”
Ramesh 和 Yi - 2009 - FTIR spectra of plasticized high molecular weight DOI: 10.1007/s11581-008-0279-z -
Alkyl C-H Vertrauen 1,0
“For PVC, C H stretching mode can be S.Rameshetal./SpectrochimicaActaPartA66(2007)1237-1242 1239 Table2 VibrationalmodesandwavenumbersexhibitedbyPMMA Wavenumbers(cm-1) Descriptionofvibrations References C Hstretching 2927-2986 [30,32] C Ostr”
Ramesh 等 - 2007 - FTIR studies of PVCPMMA blend based polymer elect DOI: 10.1016/j.saa.2006.06.012 -
Alkyl C-H Vertrauen 1,0
“Additionally, lycopene spectra presented characteristic bands at cm-1 cm-1, 959 or 960 indicating a characteristic of out-of-plane C-H bending mode for a trans-conjugated alkene [2,28].”
Bio-Availability, Anticancer Potential, and Chemical Data of Lycopene: An Overview and Technological Prospecting DOI: 10.3390/antiox11020360 -
Phosphate (PO4) Vertrauen 1,0
“Moreover, the spectrum of pure HAp shows an intense doublet at 1087-1020 cm-1 pertinent to asymmetric stretching (ν3) and a weak peak at 959 cm-1 (Table 5) that can be assigned to the symmetric stretching mode of the [PO 4]3group [54] (Tabl”
Structural Characterization of Low-Sr-Doped Hydroxyapatite Obtained by Solid-State Synthesis DOI: 10.3390/cryst13010117 -
Phosphate (PO4) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Jabin 等 - 2021 - Quantitative Analysis and Effect of SDF, APF, NaF DOI: 10.5005/jp-journals-10005-1988
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.