Was absorbiert bei 935 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 935 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 935 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 4 | 4 | 1,0 |
| C-O single bond | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Silanol (Si-OH) | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| wood | 935, 1740, 1730 | Alkyl C-H, C-O single bond | 1 |
| sodium alginate | 935, 1636, 1080 | Alkyl C-H, C-O single bond, Carboxyl (COOH) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 935 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Carboxyl (COOH) Vertrauen 1,0
“analysis of defined PLA/lactide mixtures, and then tested by isolated peak at a wavenumber of 935 This band is various means for their accuracy with respect to conversion mode.16 assigned to the COO ring breathing The signal used”
Braun 等 - 2006 - Infrared spectroscopic determination of lactide co DOI: 10.1021/ma061922a -
Vertrauen 1,0
“It is possible that the new peak of 933.03 eV may be due to Cu (I) species, while the energy band of 935.23 eV could be assumed to be due to Cu”
Ibrahim 等 - 2022 - Effect of Ammonium Sulfide on Sulfidization Flotat DOI: 10.3390/min12101193 -
Silanol (Si-OH) Vertrauen 1,0
“cm-1 vibrational modes at 557 and 717 are assigned to the structural vibrations of yttrium-oxygen cm-1 (Y-O) bonds, the peak at 688 to the stretching mode of Si-O (ν 3) units, the band position at of cm-1 cm-1 881 to the structural units of”
Luminescence and electron spin resonance studies of narrow-band UVB emitting Gd3+ doped Y2SiO5 nanophosphors synthesized by sol-gel method DOI: 10.1016/j.ijleo.2021.167228 -
Vertrauen 1,0
“A strong peak at 935 is cm-1 ACN medium remained rather unchanged at 1643 i.e., attributed to the axial oxygen atoms of the uranyl ion in the”
Verma 等 - 2018 - Structural investigations on uranium(VI) and thori DOI: 10.1039/C7NJ04460G. -
C-O single bond Vertrauen 1,0
“The band at 935 cm-1 can be attributed to the inulin glycosidic bond difficult”
Influence of Oxidation Degree on the Physicochemical Properties of Oxidized Inulin DOI: 10.3390/polym12051025 -
C-O single bond Vertrauen 1,0
“The peaks at less than 950 are due to diagnostic cm-1 carbohydrate skeletal modes (Synytsya & Novak, 2014), the band at 935 being β2→1 characteristic of inulin and attributed to the glycosidic bond (Bekers, Grube, Upite, cm-1, Kaminska, Dan”
Physical characterization and in silico modeling of inulin polymer conformation during vaccine adjuvant particle formation DOI: 10.1016/j.carbpol.2016.01.062. -
Acetate Vertrauen 1,0
“The characteristic peaks at 2951 cm-1 present the C-H stretching of the alkane groups, while the peak band at 935 cm-1 represents the C-O stretching vibration.”
Bhatia 等 - 2023 - The Effect of Sage (Salvia sclarea) Essential Oil DOI: 10.3390/gels9030233 -
Alkyl C-H Vertrauen 1,0
“Las bandas más cm-1), cm-1), características fueron las de grupos OH (3 335 enlaces C-H (2 935 cm-1), C=O en carbohidratos y lignina (1 705 C=C de anillo conjugado en alcohol cm-1), cm-1), aromático (1 645 tensión de anillo arilo de lignina”
Contreras Quiñones 等 - 2022 - DOI: 10.29298/rmcf.v13i72.1186
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.