Was absorbiert bei 926 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 926 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 926 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 3 | 3 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| Methoxy (OCH3) | 3 | 3 | 1,0 |
| Methacrylate | 3 | 3 | 1,0 |
| C-O single bond | 3 | 3 | 1,0 |
| Acetate | 3 | 3 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| Protein | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Amine primary | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| N-O bond | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| chitosan | 926, 1650, 1655 | Alkyl C-H, Amide | 1 |
| starch | 926, 1650, 1540 | Alkyl C-H, Amide | 1 |
| saliva | 926, 1648, 1664 | Amide, Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 926 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Acetate Vertrauen 1,0
“The peaks at cm-1 cm-1 926 and 999 are assigned to the C-O stretch of the glyosidic linkage (Teoh, Lim cm-1 et al.”
Ternary Natural Deep Eutectic Solvent (NADES) Infused Phthaloyl Starch as Cost Efficient Quasi-Solid Gel Polymer Electrolyte DOI: 10.1016/j.carbpol.2017.03.023 -
Carbohydrate Vertrauen 1,0
“1736cm-1 and are usually attributed to characteristic peaks of 925.7cm-1 volatile oils [12,14,26], and the peak at was due to polysaccharides [14].”
Wu 等 - 2011 - Study on difference between epidermis, phloem and DOI: 10.1016/j.vibspec.2010.11.004 -
Phosphate (PO4) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Al-Sallami 等 - 2019 - Reactivity of oil-soluble IL with silicon surface DOI: 10.1002/ls.1456 -
Acetate Vertrauen 1,0
“sharp peaks at and 601 to the triply bending vibrations of PO in 926cm-1 32The characteristic bands of CO identified at correspond to the C-O bending, and the bands at 1419, 1481cm-1 32-17,24-25.”
Asmi 等 - 2016 - Synthesis and Characterisation of Composite based DOI: 10.1063/1.4945463 -
Acetate Vertrauen 1,0
“In detail, the peaks at 992 and 1040 are related to crystalline modes, while signals at 1076, 1040, 1016, 992 and 926 cm-1 are due to C-O-H bending and cm-1 domains, while the peak at 1016 is related to the amorphous regions [30,31,33].”
Bugnotti 等 - 2023 - Structure of Starch-Sepiolite Bio-Nanocomposites DOI: 10.3390/polym15051207 -
C c single bond Vertrauen 1,0
“In the spectra obtained after the cut-off at 3 kDa, the only signals related to proteins are the out-of-ring breathing of cm-1), cm-1), tyrosine (824 the C-C stretching of the proline ring (926 the C-C stretching cm-1),”
The Role of the Preanalytical Step for Human Saliva Analysis via Vibrational Spectroscopy DOI: 10.3390/metabo13030393 -
Amide Vertrauen 1,0
“and broad infrared vibrational bands for TETS/HEXS (powtwo C-N stretching modes are essentially the fingerprint 926cm-1 ) most der spectrum, Figure 4(a) (ii) at 1151 and vibrationsforthehexamethylenetetramine(Hmta)derivative likely to be th”
Dernaika 等 - 2014 - Spectroscopic Identification of Neurotoxin Tetrame DOI: 10.1155/2014/207258 -
Alkyl C-H Vertrauen 1,0
“COH out of plane vibration 926 C-H 692 CH out of plane vibration 2 (β 887 COC, glycosidic bond)”
Application of Vibrational Spectroscopic Techniques in the Study of the Natural Polysaccharides and Their Cross-Linking Process DOI: 10.3390/ijms24032630
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.