What absorbs at 863 cm⁻¹ in an FTIR spectrum?
A band near 863 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Schnelle Antwort
A band near 863 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Oxygen heterocycle | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Secondary amine | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
| S eq o | 1 | 1 | 1,0 |
| Sulfonyl | 1 | 1 | 1,0 |
| N h | 1 | 1 | 0,8 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| silica | 863, 1100, 1080 | Methacrylate, Acetate | 1 |
| Epoxy Resin | 863, 905, 1100 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| zinc oxide | 863, 1627, 1638 | Methacrylate, Acetate, C-O single bond | 1 |
| zinc oxide nanoparticles | 863, 1744, 1627 | Acetate, Methacrylate, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 863 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Sulfonyl Vertrauen 1,0
“Intensity varies with sample crystallinity 1218 C=O=C Stretching 1020, 1080, 1170 O=S=O Stretching 863, 841, 700”
Vibrational spectroscopic study of pure and silica-doped sulfonated poly(ether ether ketone) membranes DOI: 10.1016/j.saa.2014.12.004 -
Vertrauen 1,0
“In 2 cm-1 pure PVC sample A, the C-H stretching peak at 2972 cm-1 and C-Cl stretching observed at 863 [33].”
Dynamic mechanical and optical characterization of PVC/fGO polymer nanocomposites DOI: 10.1007/s00339-018-2026-2 -
Amide Vertrauen 1,0
“glucosamine C high temperature, concentration of alkali, reaction time, 2 cm-1 was ascribed to edulis chitosan spectrum, a peak at 863 previous treatment of the chitin, particle size, chitin cm-1 C-N were stretching, absorption peaks at 101”
Varma 和 Vasudevan - 2020 - Extraction, Characterization, and Antimicrobial Ac DOI: 10.1021/acsomega.0c01903 -
Acetate Vertrauen 1,0
“During the curing process of epoxy resin, the FTIR band intensity of C-O-C and C-O cm-1 of the anhydrous epoxoid ring at 917 and 863 decreased, and the band intensity cm-1 at 1672 increased [35,39,54], indicating complete resin polymerizati”
Abu Zeid 和 Edrees - 2022 - Hydration Characterization of Two Generations of M DOI: 10.3390/app12073517 -
Vertrauen 1,0
“ESI-MS molecular-ion peak 863.21, corresponding to H+ + 1H [Zn(L7) ].”
Gusev 等 - 2020 - Synthesis, Photoluminescence and Electrical Study DOI: 10.3390/ma13245698 -
Vertrauen 1,0
“A characteristic cm-1 stored in an airtight glass vial, labeled as ZnO-NPs, and was band observed at 863 corresponds to the Zn-O stretching stored at room temperature for physicochemical, morphological bond (Ta¸s et al., 2000;”
Biogenic Synthesis and Characterization of Antimicrobial and Antiparasitic Zinc Oxide (ZnO) Nanoparticles Using Aqueous Extracts of the Himalayan Columbine (Aquilegia pubiflora) DOI: 10.3389/fmats.2020.00249 -
Aromatic ring Vertrauen 1,0
“In the fingerprint region of FA, the ≤ ± 0.05) among the samples (63.98 0.34 %), but as the concentration cm(cid:0) cm(cid:0) 1 1 characteristics peaks at 863 and 804 correspond to the two ± of RSN increased to 20 % EE declined to 52.23 0.7”
Ferulic acid loaded pickering emulsions stabilized by resistant starch nanoparticles using ultrasonication: Characterization, in vitro release and nutraceutical potential DOI: 10.1016/j.ultsonch.2022.105967 -
Oxygen heterocycle Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Water Immersion Aging of Epoxy Resin and Fique Fabric Composites: Dynamic–Mechanical and Morphological Analysis DOI: 10.3390/polym14173650
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.