Was absorbiert bei 807 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 807 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 807 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 4 | 4 | 1,0 |
| Aromatic ring | 4 | 4 | 1,0 |
| Metal oxygen | 3 | 3 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Nucleic acid | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Alkene (C=C) | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| MCM-41 | 807, 2170, 1655 | Alkyl C-H | 1 |
| lignin | 807, 1035, 1510 | Alkyl C-H, Aromatic ring | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 807 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“cm(cid:50)1 solution, three peaks appear at 807 immersing in Gravimetric porosity of as-etched porous silicon films was cm(cid:50)1 (cid:126)Si-O-Si mode(cid:33), (cid:126)Si-H asymmetric stretching 886 about 70%.”
Huang 和 Zhai - 1997 - Fourier transform infrared study of porous silicon DOI: 10.1116/1.589575 -
Aromatic ring Vertrauen 1,0
“vibrations at 2969 and 2862 respectively, and bridges -CH 2at The bands at 807 and cm-1 cm-1 755 are related to aromatic torsion vibrations [25].”
Synthesis and Characterization of Mesoporous Silica Functionalized with Calix[4]arene Derivatives DOI: 10.3390/ijms131013726 -
Vertrauen 1,0
“TiO nanoparticles have 2 additional peaks were recorded at 1454 and 1381 cm-1, due to the asymmetric and symmetric deformation cm-1 characteristic peaks at 807 corresponding to Ti-O-Ti groups and a broad peak of Ti-OH groups”
Eleftheriadou 等 - 2020 - Development of Novel Polymer Supported Nanocomposi DOI: 10.3390/app10072368 -
Methoxy (OCH3) Vertrauen 1,0
“corresponding to aliphatic and aromatic -OH (3415 cm-1), aromatic ring modes (1595 cm-1 and 1140 cm-1), carbonyl group (1684 cm-1), aliphatic -CH3 (2944 cm-1) and CH2 groups (1453 cm-1), symmetric -CH3 stretching of the methoxyl groups (285”
Characterization and Evaluation of Hydrothermal Liquefaction Char from Alkali Lignin in Subcritical Temperatures DOI: 10.3390/ma14113024 -
Aromatic ring Vertrauen 1,0
“cm-1(C=C 807cm-1 1604, 1485 aromatic bending),”
Lee 和 Kim - 2014 - Synthesis and Characterization of Thermoplastic El DOI: 10.7317/pk.2014.38.5.596 -
Metal oxygen Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Gas phase dehydration of glycerol to acrolein over WO3-based catalysts prepared by non-hydrolytic sol–gel synthesis DOI: 10.1039/c8ra01575a -
Alkene (C=C) Vertrauen 1,0
“resins before (red lines) and after UV-curing process (green lines), it is noticeable that the peak at 1638 cm-1, ascribed to the acrylic C=C stretching and the peaks at 983 cm-1 and at 807 cm-1, characteristic of =C-H stretching in acrylic”
Rajczak 等 - 2020 - Preparation and Characterization of UV-Curable Acr DOI: 10.3390/polym12020358 -
C c single bond Vertrauen 1,0
“and 1,321 Several studies have shown that the and thus is due to cm-1 Figure 6 shows the FTIR spectra of VEEA and adsorption band at 807 due to C C twisting cm-1 due to C C diethylene glycol monoethyl ether acetate.”
Curing behavior of a UV‐curable inkjet ink: Distinction between surface‐cure and deep‐cure performance DOI: 10.1002/app.49218
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.