Was absorbiert bei 702 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 702 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 702 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 3 | 3 | 1,0 |
| Aromatic ring | 2 | 2 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicate | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 0 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 702 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The band at 996 is assigned to V O stretching of distorted octahedral and distorted cm-1 square pyramids, while the band at 702 is due to coordination of vanadium atoms with the three oxygen”
Vanadium pentoxide nanobelts: One pot synthesis and its lithium storage behavior DOI: 10.1002/crat.201200122 -
Hydroxyl (O-H) Vertrauen 1,0
“cm-1 (Figure S6b), respectively The band at 702 is influenced by three modes of vibration: μ 3cm-1 OH bending + O-C-O bending + C=C-(COO) bending, while the one at 729 corresponds to 13.”
Iodine Uptake by Zr/Hf-Based UiO-66 Materials: The Influence of Metal Substitution on Iodine Evolution DOI: 10.1016/S0167-8140(02)00374-2. -
Vertrauen 1,0
“The band observed at cm-1 702 corresponded to the Ti-O stretching and Ti-O-Ti bridging stretching bonds [30,31];”
Camila Ariza-Tarazona 等 - 2019 - New strategy for microplastic degradation Green p DOI: 10.1016/j.ceramint.2018.10.208 -
Silicate Vertrauen 1,0
“Silicates are represented by the intense peaks at 1989 and 1871 cm-1 [66], and by the specific peaks of quartz at 2236, 2132 and 702 cm-1, and those attributed to muscovite at”
Technological and Functional Approaches Applied to Miniature Vessels with Pigment Traces: Two Middle Bronze Age Case Studies from Eastern Subcarpathians of Romania DOI: 10.3390/app13042093 -
Alkyl C-H Vertrauen 1,0
“cm-1 C-H out-of-plane bending modes at 702 and 761 When a weak peak is present at 3083 and cm-1 a more intense peak at 1599 can be detected, the occurrence of a copolymer of styrene and αmethyl-styrene was suggested.”
Germinario 等 - 2016 - Chemical characterisation of spray paints by a mul DOI: 10.1016/j.microc.2015.04.016 -
Aromatic ring Vertrauen 1,0
“The FTIR spectrum of CIN showed principle -1 -1 The results of the assay indicated that the content in the var- -H absorption peaks at 702.04 cm and 748.33 cm (C bending -1 -1 ious solid systems prepared by different methods was in the -H o”
Multicomponent cyclodextrin system for improvement of solubility and dissolution rate of poorly water soluble drug DOI: 10.1016/j.ajps.2018.02.007 -
Vertrauen 1,0
“The medium strength vibrational band present at 702 The role of FTIR spectroscopy in the clinical analysis of - 1 is assigned to N-H out of plane bending with the cm normal and diabetic blood samples is clearly demonstrated.”
Ramalingam 等 - 2014 - Evaluation of metformin hydrochloride in Wistar ra DOI: 10.4103/0976-9668.136168 -
Alkyl C-H Vertrauen 1,0
“The band at 702 cm is likely due to overlapping peaks of the CH rocking vibration and the out-of-plane vibration of cis-disubstituted 2 olefins, related to the presence of long chain hydrocarbons [108].”
Stefanov 等 - 2013 - Towards combinatorial spectroscopy The case of mi DOI: 10.30744/brjac.2179-3425.2018.5.18.12-27
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.