What absorbs at 534 cm⁻¹ in an FTIR spectrum?
A band near 534 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Câu trả lời nhanh
A band near 534 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Hydroxyl (O-H) | 6 | 5 | 1,0 |
| Methacrylate | 5 | 5 | 1,0 |
| Acetate | 5 | 5 | 1,0 |
| C-O single bond | 5 | 4 | 1,0 |
| Methoxy (OCH3) | 4 | 4 | 1,0 |
| Ketone | 2 | 2 | 1,0 |
| Ester | 2 | 2 | 1,0 |
| Carboxyl (COOH) | 2 | 2 | 1,0 |
| Carbonyl (C=O) | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Metal oxygen | 2 | 2 | 1,0 |
| N-O bond | 2 | 2 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| ZnO | 534, 1400, 3430 | Hydroxyl (O-H), Acetate, Methacrylate | 1 |
| TiO2 | 534, 1700, 1093 | Hydroxyl (O-H), Methacrylate, Acetate | 1 |
| silver nanoparticles | 534, 1636, 1631 | Hydroxyl (O-H), Methacrylate, Acetate | 1 |
| polypropylene | 534, 1030, 1600 | Methacrylate, Acetate, Hydroxyl (O-H) | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 534 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
Hydroxyl (O-H) độ tin cậy 1,0
“1,629 for alkenyl stretch, 1,407 for phenol or cm-1 From the stock solution, the experimentalbioassaymedia was tertiary alcohol, OH bend, 1,032 for cyclohexane ring cm-1 C-I diluted using Milli Q water as a solvent to the desired convibrati”
Marimuthu 等 - 2013 - Eco-friendly microbial route to synthesize cobalt DOI: 10.1007/s00436-013-3601-2 -
Acetate độ tin cậy 1,0
“The peak at around 533.5eV groups.[25] to further explain the influence of FePP on high temperature can be attributed to -Oin C-O-C, C-O-P, or C-OH”
Synergistic effects of ferric pyrophosphate (FePP) in intumescent flameretardant polypropylene DOI: 10.1002/pat.1590 -
C-O single bond độ tin cậy 1,0
“As is also seen from Figure 3e,f, the intensity decrease in the peak at 533.6 eV related to C-OH means the existence of intramolecular or intermolecular dehydration reactions, which happen more”
Porous Structure of -Cyclodextrin for CO2 Capture: Structural Remodeling by Thermal Activation DOI: 10.3390/molecules27217375 -
độ tin cậy 1,0
“The relatedtotheZneObond.Thepeak at534.07eVisassociatedwith decrease in absorbance peak intensityalso indicates the stabilityof loosely bonded oxygen atoms such as the hydroxy group on the the BTA molecule after loading [33].”
Effect of the modified hybrid particle on the corrosion inhibition performance of polyolefin based coatings for carbon steel DOI: 10.1016/j.jsamd.2022.100466 -
độ tin cậy 1,0
“Two bands, at 534 (-17) and 440 s cm-1, c (-13) are assigned to ν(Fe-NO) and δ(Fe-NO) modes, respectively, even though r”
Hayashi 等 - 2009 - Accommodation of Two Diatomic Molecules in Cytochr DOI: 10.1021/bi801915r. -
N-O bond độ tin cậy 1,0
“peaks in PAO at 533.9, 401.9, and 283.7 eV were related to -CN-O.”
Huang 等 - 2021 - High Selective Isomerization of Glucose to Fructos DOI: 10.1021/acsomega.1c02577 -
Metal oxygen độ tin cậy 1,0
“M-O-M The peak at 533.70 eV corresponds to the bond, at 713.06 and 725.55 eV are called satellite peaks for Fe 2p 3/2 Fe+3”
Iqbal 等 - 2023 - Reduced Graphene Oxide-Modified Spinel Cobalt Ferr DOI: 10.1021/acsomega.2c06636 -
Acetate độ tin cậy 1,0
“Even though UV-irradiated TNW caused the most prominent chemical changes (c and d in Figure S8), we noted some similarities in the spectra of TNW samples under dark and UV light: (i) increase in the P 2p peak at 134.5 eV and O 1 s peak at 5”
Thorn-like TiO2 nanoarrays with broad spectrum antimicrobial activity through physical puncture and photocatalytic action DOI: 10.1038/s41598-019-50116-0
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.