Was absorbiert bei 485 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 485 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 485 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 6 | 6 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Metal oxo | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| ZnO | 485, 1400, 3430 | Metal oxygen, Methacrylate, C-O single bond | 1 |
| ZnO nanoparticles | 485, 1219, 1726 | Methacrylate, Metal oxygen, C-O single bond | 1 |
| kaolinite | 485, 3696, 693 | Metal oxygen | 1 |
| silver nanoparticles (AgNPs) | 485, 1100, 1749 | Methacrylate | 1 |
| zinc oxide | 485, 1627, 1638 | Metal oxygen, Methacrylate, C-O single bond | 1 |
| ZnO NPs | 485, 1664, 875 | Metal oxygen, Methacrylate | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 485 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Vertrauen 1,0
“The FTIR spectra results show (Figure 6) that the absorption peaks at cm-1 485, 519, and 633 are attributed to the Al-O structural vibration and are characteristic peaks of Al 2O 3, consistent with the standard infrared peaks of corundum [1”
Study on Gemological Characteristics of Blue Sapphires from Baw-Mar Mine, Mogok, Myanmar DOI: 10.3390/cryst11111275 -
Metal oxygen Vertrauen 1,0
“The peak at 485 corresponds to the bending vibration of V-O-V [20].”
Saravanakumar 等 - 2018 - Role of NaOH concentration on synthesis and charac DOI: 10.1063/1.5047993 -
Metal oxygen Vertrauen 1,0
“Earlier workers have reported the presence of Table 3) which almost matched with the data recorded by cm-1 cm-1 Zn-O 400-500 theDebye-Scherrerprocess.Table4demonstratestherelation the band at 485 [58], 442 [59],”
Udhayan 等 - 2021 - Evaluation of Bioactive Potential of a Tragia invo DOI: 10.1007/s12668-021-00864-z -
Metal oxygen Vertrauen 1,0
“Hence, the relative intensity of TiOH(948cm-1),Ti-O-Ti band(485cm-1)”
Wan 等 - 2006 - Structure and thermal properties of titanium dioxi DOI: 10.1007/s00289-006-0506-6 -
Metal oxygen Vertrauen 1,0
“Zn-O stretching vibrations are shifted to 495 cm-1 from 485 cm-1 with the addition of Cu-O Peak at 485”
Successive Photocatalytic Degradation of Methylene Blue by ZnO, CuO and ZnO/CuO Synthesized from Coriandrum sativum Plant Extract via Green Synthesis Technique DOI: 10.3390/cryst13020281 -
Metal oxygen Vertrauen 1,0
“2 cm-1 300 (cid:3)C a wide band at 400-500 with maximum at and 500 (cid:3)C almost a plateau in sample mass can be cm-1 about 485 specific to Cu-O vibrations [33] appears.”
Synthesis of anisotropic Cu2-xS-based nanostructures by thermal oxidation DOI: 10.1007/s10973-019-08622-w -
Acetate Vertrauen 1,0
“501 νCdO νC-O available, by comparing the position of the bands with charactercoordinates, and the stretching mode, respec485 502 tively.41,73,77 istic bands of similar molecules.”
Lopes 等 - 2011 - Photochemistry and Vibrational Spectra of Matrix-I DOI: 10.1021/jp110705c -
Acetate Vertrauen 1,0
“C-O-C likeamines,phenols,alcohols,saponins,carboxylic acids, gave rise to the peak at 485 Antifungal and cytotoxic activities of AgNPs Fourier-transform Si-AgNPs.”
Rizwana 等 - 2022 - Biosynthesis and characterization of silver nanopa DOI: 10.1515/gps-2022-0048
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.