Was absorbiert bei 410 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 410 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 410 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Metal oxygen | 5 | 4 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| Carbonate | 1 | 1 | 1,0 |
| Carbon dioxide | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| TiO2 | 410, 1700, 1093 | Metal oxygen | 1 |
| Fe2O3 | 410, 1130, 1631 | Metal oxygen, Amide | 1 |
| polyaniline | 410, 1565, 1570 | Amide, Secondary amine, C n single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 410 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Metal oxygen Vertrauen 1,0
“cm-1 due to respectively in PVDF-BFO composite by interacting with BFO bands at 410 8 ACCEPTED MANUSCRIPT cm-1 bending of Fe-O and Bi-O groups and 555 due to Fe-O and Bi-O stretching of BiO and 6 cm-1 FeO octahedra [40].”
Enhanced dielectric and ferroelectric properties of PVDF-BiFeO3 composites in 0–3 connectivity DOI: 10.1016/j.jallcom.2017.04.310 -
Amide Vertrauen 1,0
“USC cm-1), 407 4) were composed of characteristic regions that correspond to amide I band (1700-1600 cm-1) 408 which is mostly a carbonyl (C=O) stretching vibration, amide II band (at 1580-1480 which 409 is essentially the combination of th”
Hempseed meal protein isolates prepared by different isolation techniques. Part I. physicochemical properties DOI: 10.1016/j.foodhyd.2017.12.015 -
Borate Vertrauen 1,0
“From the figure, IR spectrum of the base modified borate glass before gamma radiation reveals a condensed or composite vibrational bands in the range 410cm-1 1600 and the rest of the IR spectral curves show nearly the same vibrational bands”
Okasha 等 - 2020 - Bone bonding augmentation and synergetic attitude DOI: 10.1016/j.radphyschem.2020.109018 -
Vertrauen 1,0
“In which, the absorption bands cm-1 cm-1 located at 550 were associated to Sr-O & La-O (M-O) site whereas, the bands located at 410 were related to Fe-O site of hexagonal-structure (MFe 12O 19).”
Structural, electrical, and magnetic properties of nano Sr1−XLaXFe12O19 (X = 0.2–0.8) DOI: 10.1038/s41598-022-15250-2 -
Amide Vertrauen 1,0
“408 bands can be observed in these transmission spectra at 1460 and 433 It can be observed that the faster the polymerization process is 409 cm-1, (cid:1)higher potentials(cid:2), 1390 associated to the formation of imines and C-N bonds 434”
Bleda-Martinez 等 - 2008 - Electrochemical methods to enhance the capacitance DOI: 10.1149/1.2956969(cid:4) -
Metal oxygen Vertrauen 1,0
“In CuMnO x/OMS-2 catalyst, the FTIR >CuMnO x/OMS-2 (0.495)>CuO/OMS-2 (0.484), indicating patterns, to a large extent, were characterized by the vi430cm-1 that the presence of Fe and Mn components in the CuO bration peaks of Cu-O-Cu at 410,”
Nhat Huy Nguyen 等 - 2020 - Enhancing the Activity and Stability of CuOOMS-2 DOI: 10.1155/2020/8827995 -
Carbon dioxide Vertrauen 1,0
“In the The other weight loss was found between 230 and 400 °C and was attributed to the de- ◦C composition of the organic moiety (TDC2-) of the ZnMOF-BTA framework which correDTA curve, the exothermic peak at 410 is attributed to the sample”
Synthesis, Characterization and Investigation of Anticorrosion Properties of an Innovative Metal–Organic Framework, ZnMOF-BTA, on Carbon Steel in HCl Solution DOI: 10.3390/coatings12091288 -
Vertrauen 1,0
“3 In the pattern for the α-Fe2O3@TiO2 nanocomposite, the peak at 410 cm-1 corresponds to Fe-O stretching mode, while the peak observed at 497 cm-1 is due to the Ti-O stretching and 455 cm-1 for Fe-O and Ti-O stretching modes mode;”
Green Synthesis and Investigation of Surface Effects of -Fe2O3@TiO2 Nanocomposites by Impedance Spectroscopy DOI: 10.3390/ma15165768
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.