What absorbs at 408 cm⁻¹ in an FTIR spectrum?
A band near 408 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 4 cited sources
Quick answer
A band near 408 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Возможные назначения функциональных групп
| Функциональная группа | Подтверждающие факты | Цитируемые источники | Максимальная достоверность |
|---|---|---|---|
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Siloxane (Si-O-Si) | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
Ранжирование отражает накопленные литературные данные, а не единственное авторитетное правило. Всегда проверяйте в контексте вашего образца.
Possible materials
| Материал | Поддерживающие пики | Overlapping groups | Цитируемые источники |
|---|---|---|---|
| PLA | 408, 1650, 1073 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| PE | 408, 1414, 1700 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
| PP | 408, 1700, 1043 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 408 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Литература, лежащая в основе этих назначений
-
Silicon-oxygen (Si-O) достоверность 1,0
“α-Fe 295 2O 3 330 O-Si-O deformation vibration 408 Si-O-Si bending vibration”
Wu 等 - 2022 - Comparison of Natural and Dyed Fire Opal DOI: 10.3390/cryst12030322 -
Acetate достоверность 1,0
“vibration showed a band at 408 In contrast to IR spectra, C-O bond ester vibrations in PLA were weak, cm-1 and the Raman bands with maxima at 1043 and 1128 were associated with C-CH vibrations.”
Optical photothermal infrared spectroscopy with simultaneously acquired Raman spectroscopy for two-dimensional microplastic identification DOI: 10.1038/s41598-022-23318-2 -
Acetate достоверность 1,0
“408 cm-1, and C-O-C + C-CH3 vibration assigned to 302-315 cm-1.”
Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure DOI: 10.3390/app7060579 -
Metal oxygen достоверность 1,0
“-1 The spectra of vine black show additional bands at 224, 243 and 290 cm due to -1 symmetric bending of the Fe-O bond, bands at 408, 495, 608 and 659 cm due to symmetric and asymmetric vibrational modes of Fe-O bond [61] and bands at”
Lluveras-Tenorio 等 - 2019 - A multi-analytical characterization of artists' ca DOI: 10.1007/s10973-019-08522-z
Есть спектр с этой полосой?
Загрузите свой FTIR-спектр и получите полный отчет об интерпретации — назначение пиков с цитированием литературы, совпадения с библиотекой и цепочку доказательств с оценкой достоверности — за секунды.