What absorbs at 2949 cm⁻¹ in an FTIR spectrum?
A band near 2949 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Câu trả lời nhanh
A band near 2949 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Gán nhóm chức có thể
| Nhóm chức | Sự kiện hỗ trợ | Nguồn tham khảo | Độ tin cậy cao nhất |
|---|---|---|---|
| Alkyl C-H | 12 | 11 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Fatty acid | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Methoxy (OCH3) | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Amide | 1 | 1 | 1,0 |
Xếp hạng phản ánh bằng chứng tài liệu tích lũy, không phải một quy tắc duy nhất có thẩm quyền. Luôn xác nhận với ngữ cảnh mẫu của bạn.
Vật liệu có thể
| Vật liệu | Các đỉnh hỗ trợ | Các nhóm chồng chéo | Nguồn tham khảo |
|---|---|---|---|
| lignin | 2949, 1035, 1510 | Alkyl C-H, Methacrylate, Acetate | 1 |
| polypropylene | 2949, 1030, 1600 | Alkyl C-H, Methacrylate, Acetate | 1 |
| silver nanoparticles | 2949, 1636, 1631 | Alkyl C-H, Methacrylate, Acetate | 1 |
Vật liệu chỉ được hiển thị khi cùng một nhóm tài liệu hỗ trợ dải này và ít nhất một đỉnh đặc trưng bổ sung.
Logic phổ
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 2949 cm⁻¹ is usually not enough for material identification by itself.
Sử dụng thực tế
Loại truy vấn này phổ biến trong việc xác định polyme, sàng lọc nhựa chưa xác định, xử lý sự cố QC, xác minh vật liệu tái chế và đánh giá gán đỉnh dựa trên tài liệu.
Các lỗi thường gặp
- Xem xét một dải đơn lẻ như bằng chứng của một vật liệu mà không kiểm tra ít nhất một hoặc hai đỉnh hỗ trợ.
- Bỏ qua chồng lấn: nhiều nhóm chức có thể đóng góp gần cùng một số sóng.
- Bỏ qua xác nhận khi các chất phụ gia, hỗn hợp, quá trình oxy hóa hoặc nhiễm bẩn có thể làm méo phổ.
Lời khuyên xác minh
Khi vẫn còn sự mơ hồ, hãy xác thực giả thuyết bằng DSC, GC-MS hoặc TGA, đặc biệt đối với hỗn hợp, mẫu suy thoái và polyme độn.
Tài liệu tham khảo đằng sau các gán này
-
Alkyl C-H độ tin cậy 1,0
“(+) -CH3 2977 2977 stretching of (-) (-) C-H 2949 2956 2947 2954 2931 2931 antisymmetric (+)”
Maeda - 2001 - IR spectroscopic study on the hydration and the ph DOI: 10.1021/la001346q -
Alkyl C-H độ tin cậy 1,0
“The bands at 2949 and 2992 were also observed and were found to have characteristics of C-H stretching vibration of”
Pathak 等 - 2020 - Attenuation of hepatic and breast cancer cells by DOI: 10.1016/j.bcab.2020.101863 -
Alkyl C-H độ tin cậy 1,0
“LLM confirmed rule peak-group candidate”
Alassod 等 - 2021 - PolypropyleneLigninPOSS Nanocomposites Thermal DOI: 10.3390/ma14143950 -
Alkyl C-H độ tin cậy 1,0
“explicit assignment in text”
Antifungal efficiency and cytocompatibility of polymethyl methacrylate modified with zinc dimethacrylate DOI: 10.3389/fcimb.2023.1138588 -
Alkyl C-H độ tin cậy 1,0
“that the present hydrogen binding functional groups nm.[20] Germany) to measure the absorbance at 570 cm-1, of methyl (C-H) stretch at 2949 methylene (C-H) cm-1, cm-1, cm-1.”
Hamdoon 等 - 2022 - Evaluation of biofilm formation on different clear DOI: 10.4103/jos.jos_7_22 -
Alkyl C-H độ tin cậy 1,0
“For QU-loaded natural saponite and synthetic saponite aliphatic (C-H) band vibration are shown at 2340 cm-1 and 2949 cm-1.”
Kumaresan 等 - 2019 - Synthesis of Saponite Based Nanocomposites to Impr DOI: 10.3390/ph12030105 -
Alkyl C-H độ tin cậy 1,0
“2014;Corazzarietal.,2015).Finally,thebandsofamideI,II and III, which are typical of chitosan, are observed at 1650, 1590and1317cm-1,respectively(Brancaetal.,2016).The CH/PCL FTIR spectra obtained with the mixtures showed cm-1 bands at 2949”
Nunez-Gastelum 等 - 2019 - SCREENING OF THE PHYSICAL AND STRUCTURAL PROPERTIE DOI: 10.24275/uam/izt/dcbi/revmexingquim/2019v18n1/Nunez -
Alkyl C-H độ tin cậy 1,0
“LLM confirmed rule peak-group candidate”
Bacterial Biofilm Formation Using PCL/Curcumin Electrospun Fibers and Its Potential Use for Biotechnological Applications DOI: 10.3390/ma13235556
Có phổ với dải này không?
Tải lên phổ FTIR của bạn và nhận báo cáo diễn giải đầy đủ — gán đỉnh với tài liệu tham khảo, kết quả so khớp thư viện và chuỗi bằng chứng xếp hạng độ tin cậy — trong vài giây.