Was absorbiert bei 1428 cm⁻¹ in einem FTIR-Spektrum?
Eine Bande nahe 1428 cm⁻¹ kann auf mehrere funktionelle Gruppen hinweisen. Nachfolgend sind die wahrscheinlichsten Zuordnungen aufgeführt, geordnet nach der Menge der veröffentlichten Belege, die jede unterstützen – jede einzelne ist auf Literatur (DOI) zurückführbar und gegen unsere über 130.000 Referenzspektren und Wissensgraph kreuzvalidiert.
Backed by 8 cited sources
Schnelle Antwort
Eine Bande nahe 1428 cm⁻¹ wird normalerweise interpretiert, indem überprüft wird, welche funktionellen Gruppen dort in der Literatur wiederholt gemeinsam auftreten, und dann mindestens ein oder zwei zusätzliche Peaks in derselben Probe bestätigt werden. Diese Seite ordnet diese Zuordnungen nach gesammelten Beweisen und nicht nach einer einzigen festen Lehrbuchregel.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Alkyl C-H | 12 | 12 | 1,0 |
| Methoxy (OCH3) | 5 | 5 | 1,0 |
| Methacrylate | 5 | 5 | 1,0 |
| C-O single bond | 5 | 5 | 1,0 |
| Acetate | 5 | 5 | 1,0 |
| Hydroxyl (O-H) | 4 | 3 | 1,0 |
| Aromatic ring | 3 | 3 | 1,0 |
| Carboxyl (COOH) | 3 | 3 | 1,0 |
| N-O bond | 2 | 2 | 1,0 |
| Alkene (C=C) | 2 | 2 | 1,0 |
| Carbohydrate | 2 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Borate | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
Das Ranking spiegelt gesammelte Literaturbelege wider, keine einzelne feste Regel. Überprüfen Sie stets anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| nanocomposite | 1428, 2921, 3300 | Alkyl C-H, Methacrylate, C-O single bond | 1 |
| NiO | 1428, 1006, 1450 | Alkyl C-H, C-O single bond, Methoxy (OCH3) | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
Diese Bande wird nur sinnvoll, wenn sie zusammen mit ihren benachbarten Peaks gelesen wird. In der Praxis sehen Analysten zunächst die obigen Zuordnungen an und prüfen dann, ob dieselbe Probe auch andere für dasselbe Strukturmotiv erwartete Peaks zeigt. Eine einzelne Bande nahe 1428 cm⁻¹ reicht normalerweise nicht für eine Materialidentifikation allein aus.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
N-O bond Vertrauen 1,0
“as s at 323 K and further outgassing at different temperatures inside alyst 3 3 cm-1 absorption peak at 1428 is absent which is high intense The a progressive disappearance of the adsorbed NH3+ NO bands during the rectangle:”
Low-temperature selective catalytic reduction of NO with NH3 over V/ZrO2 prepared by flame-assisted spray pyrolysis: Structural and catalytic properties DOI: 10.1016/j.apcatb.2012.08.012 -
Alkyl C-H Vertrauen 1,0
“cm-1 vibration of The sharp peak at 1428 can be assigned to the CH 2-CO cm-1, cm-1and deformation.”
Crystal Growth, Spectral, Optical, Laser damage, Photoconductivity and Dielectric Properties of Semiorganic L-cystine hydrochloride Single Crystal DOI: 10.1016/j.saa.2015.06.113 -
Alkene (C=C) Vertrauen 1,0
“LLM confirmed rule peak-group candidate”
Hasanuddin 等 - 2020 - Physicochemical Characterization and Controlled Re DOI: 10.22146/ijc.40921 -
Alkyl C-H Vertrauen 1,0
“The absorption while mode 16 is primarily a CH s 1 and 2), which indicates that these terminal atoms contribute cm-1) sconsists of the COO and CH vibrations peak B (1428 s to the three normal modes.”
CH Mode Mixing Determines the Band Shape of the Carboxylate Symmetric Stretch in Apo-EDTA, Ca2+–EDTA, and Mg2+–EDTA DOI: 10.1021/acs.jpca.1c03061 -
Hydroxyl (O-H) Vertrauen 1,0
“creasing intensity in the band 1428 cm-1 and 3380 cm-1 are related to H-O-H bending and”
Pillarization of Sumatera Bentonite by Sodium-assisted As Effective Adsorbent of Anionic Surfactants Sodium Lauryl Sulphate (SLS) Waste DOI: 10.9767/bcrec.16500) -
Alkyl C-H Vertrauen 1,0
“peak at 1427.6 cm was assigned to -CH in alkyl substituted 3 data for the Ch-PANI-NiO nanocomposite are tabulated in Table-1, -1 amide group [48] .”
Synthesis and characterization of chitosan-polyaniline-nickel(II) oxide nanocomposite DOI: 10.1016/j.molstruc.2021.130750 -
Alkyl C-H Vertrauen 1,0
“618 cm-1 cm-1 vibrations), 1509 (C=O and C=C vibrations), 1428 (olefinic C-H bending vibrations), cm-1 cm-1 1278 (aromatic C-O stretching vibrations), 1024 (C-O-C stretching vibrations) [13].”
Ahmed 等 - 2021 - STRUCTURAL AND OPTICAL CHARACTERISTICS OF POLY(VIN DOI: 10.4314/bcse.v35i3.12 -
Aromatic ring Vertrauen 1,0
“X-ray diffraction pattern indicates that the bulk stretching of the quinoid ring and 1428 cm-1 are the characteristic and benzenoid ring polyaniline prepared at the optimum temperature is amorphous, whereas the polyaniline which confirms th”
Preparation of Anionic Surfactant-Based One-Dimensional Nanostructured Polyaniline Fibers for HydrogenStorage Applications DOI: 10.3390/polym15071658
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekundenschnelle einen vollständigen Interpretationsbericht – Peakzuordnungen mit Literaturzitaten, Bibliotheksübereinstimmungen und eine literaturgestützte Analyse.