What absorbs at 1355 cm⁻¹ in an FTIR spectrum?
A band near 1355 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Risposta rapida
A band near 1355 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Possibili assegnazioni di gruppi funzionali
| Gruppo funzionale | Fatti di supporto | Fonti citate | Affidabilità massima |
|---|---|---|---|
| Alkyl C-H | 5 | 5 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Amide | 3 | 3 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Nitrogen heterocycle | 1 | 1 | 1,0 |
| C c single bond | 1 | 1 | 1,0 |
| Hydroxyl (O-H) | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| Methyl | 1 | 1 | 1,0 |
| Nitrate | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| S eq o | 1 | 1 | 0,9 |
La classifica riflette le prove bibliografiche accumulate, non una singola regola autorevole. Conferma sempre nel contesto del tuo campione.
Materiali possibili
| Materiale | Picchi di supporto | Gruppi sovrapposti | Fonti citate |
|---|---|---|---|
| lignin | 1355, 1035, 1510 | Alkyl C-H | 1 |
| wood | 1355, 1740, 1730 | Alkyl C-H | 1 |
| PET | 1355, 1408, 800 | Alkyl C-H, Amide | 1 |
| chitosan | 1355, 1650, 1655 | Alkyl C-H, Amide | 1 |
I materiali vengono mostrati solo quando lo stesso pool di letteratura supporta questa banda e almeno un picco caratteristico aggiuntivo.
Logica dello spettro
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1355 cm⁻¹ is usually not enough for material identification by itself.
Utilizzo nel mondo reale
Questo tipo di richiesta è comune nell＇identificazione dei polimeri, nello screening di plastiche sconosciute, nella risoluzione dei problemi di controllo qualità, nella verifica dei materiali riciclati e nella revisione dell＇assegnazione dei picchi supportata dalla letteratura.
Errori comuni
- Trattare una banda isolata come prova di un materiale senza verificare almeno uno o due picchi di supporto.
- Ignorando la sovrapposizione: più gruppi funzionali possono contribuire vicino allo stesso numero d＇onda.
- Saltare la convalida quando additivi, miscele, ossidazione o contaminazione possono distorcere lo spettro.
Consiglio di verifica
Quando permangono ambiguità, convalida l＇ipotesi con DSC, GC-MS o TGA, specialmente per miscele, campioni degradati e polimeri caricati.
Letteratura dietro queste assegnazioni
-
Acetate affidabilità 1,0
“(1355 and C-O stretching (1249 It is noted that, the intensity of C-H and C-O-H bending significantly increased from 3.8% to 20.0% as presented in Fig.”
Solid polymer electrolyte production from 2-hydroxyethyl cellulose: Effect of NH4NO3 composition on its structural properties DOI: 10.1016/j.carbpol.2017.02.033 -
Nitrate affidabilità 1,0
“Furthermore, the sharp band at 1355 cm(cid:2)1 to the stretching vibrations of the Schiff base groups comindicates the presence of the other nitrate group”
Przybylski 等 - 2008 - ESI MS, spectroscopic and semiempirical characteri DOI: 10.1016/j.molstruc.2007.07.039 -
Alkyl C-H affidabilità 1,0
“On the other hand, the peak at 1355 was the combination peak of symmetry NO 2, C = O stretching, CH deformation and C-N stretching vibration.”
Synthesis and characterizations of o-nitrochitosan based biopolymer electrolyte for electrochemical devices DOI: 10.1371/journal.pone.0212066 -
Acetate affidabilità 1,0
“a new band at 1355 cm-1 between the previous occurred and was assigned to wood constituents (-CH 3 fromlignin/hemicellulose/polysaccharide-OH).Theseresultsindicatepossiblechemical interactions between rubber, PET, HDPE, wood, and FA compoun”
The Influence of Fly Ash on the Mechanical Properties of Water Immersed All Waste Composites DOI: 10.3390/polym14101957 -
Alkyl C-H affidabilità 1,0
“Furthermore, small symmetric stretching bands of formate species can be detected at 1355 cm-1, and the corresponding δ (CH) at 1375 cm-1 [88,89].”
CO2 Methanation over Nickel Catalysts: Support Effects Investigated through Specific Activity and Operando IR Spectroscopy Measurements DOI: 10.3390/catal13020448 -
Alkyl C-H affidabilità 1,0
“The band derived from the -C-H bond at a wavenumber of 1355 cm-1 also slightly changes.”
Preparation and Characterization of Indomethacin Supramolecular Systems with -Cyclodextrin in Order to Estimate Photostability Improvement DOI: 10.3390/molecules26247436 -
affidabilità 1,0
“Moreover, asymmetric S O stretching 2 cm-1, cm-1, = at 1355 and symmetric S O stretching at 1177 were observed in the FTIR spectra 2 of tosylated cellulose, which confirmed the tosylation reaction.”
A Composite Anion Conducting Membrane Based on Quaternized Cellulose and Poly(Phenylene Oxide) for Alkaline Fuel Cell Applications DOI: 10.3390/polym12112676 -
C c single bond affidabilità 1,0
“FTIR peaks at 1355, 1039, 1034, 1023, 1001, 999 C-C-Cinplanebend cm(cid:1)1 151 510.1825 492.8 120.4 & are indicative of this.”
Computational and spectral studies of 3,3'-(propane-1,3-diyl)bis(7,8-dimethoxy-1,3,4,5-tetrahydro-2H-benzo[d]azepin-2-one) DOI: 10.1016/j.heliyon.2019.e02420
Hai uno spettro con questa banda?
Carica il tuo spettro FTIR e ottieni un report di interpretazione completo — assegnazioni di picchi con citazioni bibliografiche, corrispondenze con librerie e una catena di prove con valutazione di affidabilità — in secondi.