What absorbs at 1311 cm⁻¹ in an FTIR spectrum?
A band near 1311 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 5 cited sources
Schnelle Antwort
A band near 1311 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Secondary amine | 2 | 2 | 1,0 |
| Amide | 2 | 2 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| C-O single bond | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Methacrylate | 1 | 1 | 1,0 |
| Ketone | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Carboxyl (COOH) | 1 | 1 | 1,0 |
| Carbonyl (C=O) | 1 | 1 | 1,0 |
| Acetate | 1 | 1 | 1,0 |
| C n single bond | 1 | 1 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| Chitosan | 1311, 1650, 1655 | Alkyl C-H, Amide, N h | 1 |
| polyurethane | 1311, 2270, 1700 | Alkyl C-H, N h, Amide | 1 |
| CaCO3 | 1311, 1141, 712 | Alkyl C-H | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1311 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Amide Vertrauen 1,0
“The C-O-C 𝑐𝑚-1, stretching vibration appears at 1075.12 while the C-N stretches around 1311.35 𝑐𝑚-1 (Timotius et al., 2022).”
Timotius 等 - 2022 - The Study of Methylene Blue Loading into Chitosan- DOI: 10.14716/ijtech.v13i8.6133 -
Acetate Vertrauen 1,0
“Signals obtained at 1311 are assigned to C=O vibration in lignin and at 1361 associated to deformation of C-H group in cellulose and hemicellulose.”
Diego Mendez-Mejias 和 Moya - 2016 - Effects on density, shrinking, color changing and DOI: 10.18671/scifor.v44n112.03 -
C-O single bond Vertrauen 1,0
“Bands at ~1311 1370 and the C-OH (or C-CH) bending mode.”
2D Correlation Spectroscopy (2DCoS) Analysis of Temperature-Dependent FTIR-ATR Spectra in Branched Polyethyleneimine/TEMPO-Oxidized CelluloseNano-Fiber Xerogels DOI: 10.3390/polym13040528 -
Vertrauen 1,0
“A very sharp peaks at 1311 which refers to N-H stretching is observed due to 4+ the complexation with addition of NH 4NO between the NH ions from salt in the BPEs system.”
Shaffie 和 Khiar - 2018 - Characterization of Chitosan-starch Blend Based Bi DOI: 10.1063/1.5041232 -
Alkyl C-H Vertrauen 1,0
“The peaks at around 1311 cm-1 were due to the twisting mode of -CH2, while that at around 1360 cm-1 corresponded to the methylene groups wagging vibrations [3,12,18].”
Fabrication of Aliphatic Water-Soluble Polyurethane Composites with Silane Treated CaCO3 DOI: 10.3390/polym12040747
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.