What absorbs at 1221 cm⁻¹ in an FTIR spectrum?
Una banda cerca de 1221 cm⁻¹ puede apuntar a varios grupos funcionales. A continuación se muestran las asignaciones más probables, clasificadas por cuánta evidencia publicada respalda cada una — cada una trazable a literatura (DOI) y validada de forma cruzada con nuestros más de 130,000 espectros de referencia y grafo de conocimiento.
Backed by 8 cited sources
Quick answer
A band near 1221 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Posibles asignaciones de grupos funcionales
| Grupo funcional | Hechos de respaldo | Fuentes citadas | Confianza máxima |
|---|---|---|---|
| C-O single bond | 5 | 5 | 1,0 |
| Amide | 4 | 4 | 1,0 |
| Methoxy (OCH3) | 4 | 4 | 1,0 |
| Methacrylate | 4 | 4 | 1,0 |
| Acetate | 4 | 4 | 1,0 |
| Secondary amine | 2 | 2 | 1,0 |
| C n single bond | 2 | 2 | 1,0 |
| Phosphate (PO4) | 2 | 2 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
| Ring structure | 1 | 1 | 1,0 |
| Chlorine | 1 | 1 | 1,0 |
| Urethane | 1 | 1 | 1,0 |
| N h | 1 | 1 | 1,0 |
| Metal oxygen | 1 | 1 | 1,0 |
| Fluorine (C-F) | 1 | 1 | 0,7 |
La clasificación refleja la evidencia acumulada de la literatura, no una única regla autorizada. Siempre confirme según el contexto de su muestra.
Possible materials
| Material | Supporting peaks | Overlapping groups | Fuentes citadas |
|---|---|---|---|
| PET | 1221, 1408, 800 | Methacrylate, Methoxy (OCH3), C-O single bond | 1 |
| collagen | 1221, 1408, 1660 | Amide, Methacrylate, Methoxy (OCH3) | 1 |
| polyurethane | 1221, 2270, 1700 | Methacrylate, C-O single bond, Methoxy (OCH3) | 1 |
Materials are shown only when the same literature pool supports this band and at least one additional characteristic peak.
Spectrum logic
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1221 cm⁻¹ is usually not enough for material identification by itself.
Real-world usage
This type of query is common in polymer identification, unknown plastic screening, QC troubleshooting, recycled-material verification, and literature-backed peak assignment review.
Common mistakes
- Treating one isolated band as proof of a material without checking at least one or two supporting peaks.
- Ignoring overlap: multiple functional groups can contribute near the same wavenumber.
- Skipping validation when additives, blends, oxidation, or contamination may distort the spectrum.
Verification advice
When ambiguity remains, validate the hypothesis with DSC, GC-MS, or TGA, especially for blends, degraded samples, and filled polymers.
Literatura detrás de estas asignaciones
-
confianza 1,0
“Explicit assignment in text.”
A facile synthesis of ZSM-11 zeolite particles using rice husk ash as silica source DOI: 10.1016/j.matlet.2012.07.079 -
Metal oxygen confianza 1,0
“cm-1) ν 42-), pattern, three intense bands are observed in the 54 (<100 allowing the observation of (SO 75 2 significantly antisymmetric stretching region at 1221, 1134 and 55 Fe-O, H 2O and lattice modes, which overlap 76 cm-1.”
Ventruti 等 - 2016 - Hydrogen bond system and vibrational spectroscopy DOI: 10.1127/ejm/2016/0028-2571 -
Amide confianza 1,0
“Bands depicting amide II were found at 1517, cm-1, 1586, 1514, and 1522 whereas amide III bands were registered at 1221, 1219, 1227,”
Comparison of Different Methods for Spongin-like Collagen Extraction from Marine Sponges (Chondrilla caribensis and Aplysina fulva): Physicochemical Properties and In Vitro Biological Analysis DOI: 10.3390/membranes11070522 -
Phosphate (PO4) confianza 1,0
“Indeed, P-O-C observed at, respectively, 1030 and 1221cm-1 new peak appeared at and could be attributed to the stretching vibration of P=O.”
Dardouri 等 - 2015 - Aminoalkylated Merrifield Resins Reticulated by Tr DOI: 10.1155/2015/782841 -
confianza 1,0
“There are three important vibrations of collagen molecules: at 1644 ν(C=O) (amide I), 1541 cm-1 attributed to δ(N-H) and ν(C-N) (amide II) and at 1221 cm-1 cm-1 cm-1 ν(C=O) ν(C=O) (amide I), 1541 cm-1 attributed to δ(N-H) and ν(C-N) (amide”
Drobota 等 - 2020 - Preparation and Characterization of Electrospun Co DOI: 10.3390/ma13183961 -
C-O single bond confianza 1,0
“Published cm(cid:3)1,35,39 cm(cid:3)1 band).35,38 presence of a covalent CH vibrations at 1459, 1368, and 1309 amide I (ester The peak at 1531 shows 2 cm(cid:3)1,35,38 cm(cid:3)1,35 is C-O-C band) at 1221 that the urethane band increases wi”
Polyurethane/58S bioglass nanofibers: synthesis, characterization, and in vitro evaluation DOI: 10.1039/c5ra24786a -
confianza 1,0
“2.24 - 2.58 (m, 2 H, 4) 2.61 - 2.95 (m, 2 H, 3) 3.61 (ddt, C-O carboxylic acids 1188 J=2.33, 1.58, 0.75, 0.75 Hz, 2 H, 6) 4.44 - 4.46 (s, 1 Methylene twist 1298, 1275 H,10) 6.57 (d, J=5.10 Hz, 1 H, 7) 6.97 (td, J=7.50, 1.20 Chlorophenyl C-C”
Housheh 等 - 2015 - GCMS, FTIR and NMR Studies for the Identification DOI: 10.5530/ijper.49.4.1 -
Hydroxyl (O-H) confianza 1,0
“1221cm-1 cm-1 and 1104 CO stretch corresponding to the alcohol group (Jaganathan et al.”
Jaganathan 等 - 2019 - Blood compatibility assessments of electrospun pol DOI: 10.1590/0001-3765201920190018
¿Tiene un espectro con esta banda?
Cargue su espectro FTIR y obtenga un informe de interpretación completo — asignaciones de picos con citas bibliográficas, coincidencias de librerías y una cadena de evidencia con calificación de confianza — en segundos.