What absorbs at 1202 cm⁻¹ in an FTIR spectrum?
A band near 1202 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Schnelle Antwort
A band near 1202 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Mögliche Funktionsgruppenzuweisungen
| Funktionelle Gruppe | Unterstützende Fakten | Zitierte Quellen | Höchstes Vertrauen |
|---|---|---|---|
| Amide | 3 | 3 | 1,0 |
| Methoxy (OCH3) | 2 | 2 | 1,0 |
| Methacrylate | 2 | 2 | 1,0 |
| C-O single bond | 2 | 2 | 1,0 |
| Acetate | 2 | 2 | 1,0 |
| Protein | 2 | 2 | 1,0 |
| S s | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| Alkyl C-H | 1 | 1 | 1,0 |
| Phosphorus | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
Das Ranking spiegelt die gesammelte Literatur Evidenz wider, nicht eine einzelne maßgebliche Regel. Bestätigen Sie immer anhand Ihres Probenkontexts.
Mögliche Materialien
| Material | Unterstützende Peaks | Überlappende Gruppen | Zitierte Quellen |
|---|---|---|---|
| collagen | 1202, 1408, 1660 | Amide, Methacrylate, Methoxy (OCH3) | 3 |
| copper | 1202, 1636, 1020 | Methacrylate, Methoxy (OCH3), C-O single bond | 1 |
Materialien werden nur angezeigt, wenn derselbe Literaturpool diese Bande und mindestens einen weiteren charakteristischen Peak unterstützt.
Spektrumslogik
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1202 cm⁻¹ is usually not enough for material identification by itself.
Praktische Anwendung
Diese Art von Abfrage ist üblich bei der Polymeridentifikation, dem Screening unbekannter Kunststoffe, der Fehlersuche in der Qualitätskontrolle, der Verifizierung von Recyclingmaterial und der literaturgestützten Überprüfung der Peakzuordnung.
Häufige Fehler
- Behandlung einer isolierten Bande als Beweis für ein Material, ohne mindestens einen oder zwei unterstützende Peaks zu überprüfen.
- Überlappung ignorieren: Mehrere funktionelle Gruppen können nahe der gleichen Wellenzahl beitragen.
- Überspringen der Validierung, wenn Additive, Mischungen, Oxidation oder Verunreinigungen das Spektrum verfälschen können.
Beratung zur Verifizierung
Wenn weiterhin Mehrdeutigkeit besteht, validieren Sie die Hypothese mit DSC, GC-MS oder TGA, insbesondere bei Mischungen, degradierten Proben und gefüllten Polymeren.
Literatur hinter diesen Zuweisungen
-
Amide Vertrauen 1,0
“= = Statistically significant differences were found between the OA groups (group 1 early OA, group 2 inter- = mediate OA and group 3 severe OA) in all univariate parameters (amide I region, carbohydrate region, collagen cm-1) integrity and”
Imaging of Osteoarthritic Human Articular Cartilage using Fourier Transform Infrared Microspectroscopy Combined with Multivariate and Univariate Analysis DOI: 10.1038/srep30008 -
Amide Vertrauen 1,0
“These peaks are assigned to amide III analysis method has to be validated against current biochemical cm(cid:2)1), collagen23 (1202 CH2 side chain vibrations of vibration of gold standards before it can fully replace traditional techniques.”
Rieppo 等 - 2012 - Application of second derivative spectroscopy for DOI: 10.1016/j.joca.2012.01.010 -
Phosphate (PO4) Vertrauen 1,0
“1654, and 1602 and within the phosphate band at 1202 and 1136 Here, the amide I subbands were set as targets for the detection of non-enzymatic cross-links with FTIR.”
Assessment of collagen quality associated with non-enzymatic cross-links in human bone using Fourier-transform infrared imaging DOI: 10.1016/j.bone.2017.01.015. -
Amide Vertrauen 1,0
“SO3(cid:0) asymmetric stretching (Amide III) 1202 1200 1203* 1203 1201 CH2 wagging from glycine Table 2 backbone and from proline”
Organic biopolymers of venus clams: Collagen-related matrix in the bivalve shells with crossed-lamellar ultrastructure DOI: 10.1016/j.bbrep.2021.100939 -
Ester Vertrauen 1,0
“appears at 600 The bands at 1710, 1440, 1343, and 1202 cm-1 in the complex are associated with the ester group in”
Analysis of Iron Complexes of Tannic Acid and Other Related Polyphenols as Revealed by Spectroscopic Techniques: Implications in the Identification and Characterization of Iron Gall Inks in Historical Manuscripts DOI: 10.1021/acsomega.2c01679 -
Vertrauen 1,0
“Peaks in the 1150-550 The two bands at 1202 cm-1 and 1238 cm-1 arise from the A mode of νas S-O and νs S-O and the E cm-1 region are mainly the absorption bands of the clinker phases [59].”
Liu 等 - 2020 - Study of the Air-Entraining Behavior Based on the DOI: 10.3390/ma13163514 -
Acetate Vertrauen 1,0
“The centroid spectrum corresponding to fibrosis tissue was characterized by absorbance peaks related to vibrational modes of collagen as evidenced by the peaks at 1174 cm-1 (C-O stretching) [34], 1202 cm-1, 1230 cm-1, 1278 cm-1, 1304 cm-1 (”
Moreau 等 - 2020 - Analysis of Hepatic Fibrosis Characteristics in Ci DOI: 10.3390/molecules25184092 -
Acetate Vertrauen 1,0
“This is not surprising, bearing in mind the already reported small affinity of the Cu-Chl complex for self-agregation.33 However, two new bands emerged in the C-O stretching region, at 1202.3 cm-1 (weak) and 1118.8 (strong) - Table I.”
Petrovic 等 - 2006 - In vitro complexes of copper and zinc with chlorop DOI: 10.2298/JSC0605501P
Haben Sie ein Spektrum mit dieser Bande?
Laden Sie Ihr FTIR-Spektrum hoch und erhalten Sie in Sekunden einen vollständigen Interpretationsbericht – Peakzuweisungen mit Literaturzitaten, Bibliotheksübereinstimmungen und einer vertrauensbewerteten Evidenzkette.