What absorbs at 1145 cm⁻¹ in an FTIR spectrum?
A band near 1145 cm⁻¹ can point to several functional groups. Below are the most likely assignments, ranked by how much published evidence supports each — every one traceable to literature (DOI) and cross-validated against our 130,000+ reference spectra and knowledge graph.
Backed by 8 cited sources
Szybka odpowiedź
A band near 1145 cm⁻¹ is usually interpreted by checking which functional groups repeatedly co-occur there in the literature, then confirming at least one or two additional peaks in the same sample. This page ranks those assignments by accumulated evidence rather than by a single fixed textbook rule.
Możliwe przypisania grup funkcyjnych
| Grupa funkcyjna | Fakty wspierające | Cytowane źródła | Najwyższa wiarygodność |
|---|---|---|---|
| C-O single bond | 18 | 18 | 1,0 |
| Methoxy (OCH3) | 17 | 17 | 1,0 |
| Methacrylate | 17 | 17 | 1,0 |
| Acetate | 17 | 17 | 1,0 |
| Amide | 4 | 4 | 1,0 |
| Secondary amine | 3 | 3 | 1,0 |
| C n single bond | 3 | 3 | 1,0 |
| Hydroxyl (O-H) | 2 | 2 | 1,0 |
| Alkyl C-H | 2 | 2 | 1,0 |
| Ring structure | 2 | 2 | 1,0 |
| Alkene (C=C) | 2 | 2 | 1,0 |
| S eq o | 1 | 1 | 1,0 |
| Hydrogen bond | 1 | 1 | 1,0 |
| Lignin | 1 | 1 | 1,0 |
| Carbohydrate | 1 | 1 | 1,0 |
| C=n | 1 | 1 | 1,0 |
| Chitosan | 1 | 1 | 1,0 |
| Silicon-oxygen (Si-O) | 1 | 1 | 1,0 |
| Silicon (Si) | 1 | 1 | 1,0 |
| Ester | 1 | 1 | 1,0 |
| C-S single bond | 1 | 1 | 1,0 |
| Water (H2O) | 1 | 1 | 1,0 |
| Phospholipid | 1 | 1 | 1,0 |
| Phosphate (PO4) | 1 | 1 | 1,0 |
| Aromatic ring | 1 | 1 | 1,0 |
Ranking odzwierciedla zgromadzone dowody literaturowe, a nie pojedynczą autorytatywną zasadę. Zawsze potwierdzaj w kontekście swojej próbki.
Możliwe materiały
| Materiał | Piki potwierdzające | Nakładające się grupy | Cytowane źródła |
|---|---|---|---|
| PMMA | 1145, 1722, 1383 | Methacrylate, Acetate, Methoxy (OCH3) | 1 |
Materiały są wyświetlane tylko wtedy, gdy ta sama baza literaturowa potwierdza to pasmo i co najmniej jeden dodatkowy charakterystyczny pik.
Logika widma
This band becomes meaningful only when read with its neighboring peaks. In practice, analysts first look at the assignments above, then check whether the same sample also shows other peaks expected for the same structural motif. A lone band near 1145 cm⁻¹ is usually not enough for material identification by itself.
Zastosowanie w rzeczywistości
Ten typ zapytania jest powszechny w identyfikacji polimerów, przesiewaniu nieznanych tworzyw sztucznych, rozwiązywaniu problemów z kontrolą jakości, weryfikacji materiałów pochodzących z recyklingu oraz przeglądzie przypisania pików wspartym literaturą.
Częste błędy
- Traktowanie jednego izolowanego pasma jako dowodu materiału bez sprawdzenia co najmniej jednego lub dwóch pików wspierających.
- Ignorowanie nakładania się: wiele grup funkcyjnych może przyczyniać się w pobliżu tej samej liczby falowej.
- Pomijanie walidacji, gdy dodatki, mieszanki, utlenianie lub zanieczyszczenia mogą zniekształcić widmo.
Porada dotycząca weryfikacji
Gdy pozostaje niejednoznaczność, zweryfikuj hipotezę za pomocą DSC, GC-MS lub TGA, szczególnie w przypadku mieszanin, zdegradowanych próbek i wypełnionych polimerów.
Literatura stojąca za tymi przypisaniami
-
Acetate wiarygodność 1,0
“Zhou, Limin Wu, Polymer 122-129 4 C-O stretching vibrations 1145 (2011).”
Kumar 和 Sidhu - 2013 - Synthesis and Characterization of PMMA-ZrO2 Nanoco DOI: 10.1063/1.4810163 -
Amide wiarygodność 1,0
“stretching (1534 and 1381 C-O and C-N stretching (1145 and 1013 The RA-CPTMS/TiO composite 2 materials showed both characteristic peaks of TiO and the red amaranth extract, indicating the successful 2”
Kurniawan 等 - 2019 - Selective Betalain Impregnation from Red Amaranth DOI: 10.1063/1.5134613 -
Aromatic ring wiarygodność 1,0
“The 1145cm-1 1080cm-1 absorption peak at and corresponded to the benzene ring =C-H bending vibration 916cm-1 in the plane.”
Li 等 - 2011 - The detection of Cypermethrin on the surface of Ap DOI: 10.4028/www.scientific.net/AMR.287-290.2991 -
Acetate wiarygodność 1,0
“In the glycerol cm(cid:1)1 spectra, the peak intensities at about 1145 and 962 are responsible for C-O stretching [27].”
Interactions between polyols and wheat biopolymers in a bread model system fortified with inulin: A Fourier transform infrared study DOI: 10.1016/j.heliyon.2018. -
Phosphate (PO4) wiarygodność 1,0
“Peaks formed at 1145 cm-1 might also be due to the PO2 group vibration of the phospholipids present in the cold pressed walnut oil.”
Walnut Oil Oleogels as Milk Fat Replacing System for Commercially Available Chocolate Butter DOI: 10.3390/gels8100613 -
Acetate wiarygodność 1,0
“Three -C-O-Cpeaks appear at 1145, 1116, and cm-1, ular segments.”
Yang 等 - 2015 - Effect of molecular weight on conformational chang DOI: 10.1007/s10853-014-8714-1 -
Water (H2O) wiarygodność 1,0
“Therefore, the peak position at 1145 of between SO and water molecules are only slightly weaker 42V the band of SO may be related to MgSO gels present as than those between water molecules, the formation of SIPs (and”
Zhao 等 - 2006 - Magnesium sulfate aerosols studied by FTIR spectro DOI: 10.1021/jp055291i -
Amide wiarygodność 1,0
“[46], the peak at 1145 the amide band that accounts for the peak at 1236 cm-1[45].”
Antibacterial Activity of the Green Synthesized Plasmonic Silver Nanoparticles with Crystalline Structure against Gram-Positive and Gram-Negative Bacteria DOI: 10.3390/nano13081327
Masz widmo z tym pasmem?
Prześlij swoje widmo FTIR i uzyskaj pełny raport interpretacji — przypisania pików z cytowaniami literaturowymi, dopasowania biblioteczne oraz łańcuch dowodów z oceną wiarygodności — w kilka sekund.